TECURS WK007 Wireless Keyboard Gaming Light Up Keyboard Silent Ultra Slim User Guide

TECURS WK007 Wireless Keyboard Gaming Light Up Keyboard Silent Ultra Slim

Specifications

• Dimension: 438.6 x 149.3 x 22mm
• Working Range: ≤ 33ft (10m)
• Working Voltage: 3.7V DC÷5%
• Working Current: ≤ 100mA
• Standby Current: ≤ 0. 1mA

Package Contents

• 1 x Wireless Keyboard
• 1 x User Manual
• 1 x USB Receiver
• 1x USB-C Cable

Product Overview

1. Power Switch: Push the switch from down to up to turn on
2. Windows Indicator: Enable/disable in Windows OS
3. Mac Indicator: Enable/disable in Mac OS
4. Power Indicator & Caps Lock Indicator & Low Battery Indicator & Charge
   • Indicator: The power indicator will be red for 3 seconds when the keyboard has been turned on. Enable Caps Lock in green. Red light will flash when the battery runs out. Blue light will turn on when the keyboard is charging and turns off once fully charged.

Keys and Functions

1. The language of the device settings and the Hardware Keyboard should be the same as the keyboard language.
2. How to use the function keys on Windows.
   • The Multimedia keys are all set in default settings (such as Music player, Play/ Pause, etc.). If you want to enable function keys in Windows operating system, you can press Fn + F1~F12 function Key simultaneously or press to activate them.
   • Press again to restore the keyboard to default settings. When the function is activated, cannot switch to MacOS.
3. How to use the function keys on Mac
   • Note: The keyboard doesn’t support F1~FN function on Mac OS.

Note

• US:
• UK:

Fn+ Set backlit brightness and turn off lighting

Operation Methods

1. Take out the USB receiver form the back of the keyboard.
2. Turn on the On/Off switch. Plug the USB receiver into the USB port of your computer. Wait a few seconds and it’s ready to go.

The Solution to Pairing Failures

If the keyboard cannot pair with your computer, or if you are using a new receiver, please try the following steps to pair the keyboard again:

1. Turn on the keyboard, which should be within 7.87 inches (20cm) away from the receiver.
2. Plug the receiver into the USB port of the computer.
3. Press and Esc + K together to pair. Then LED indicator will flash red until the receiver is successfully connected, the LED indicator turn off.

Note: If the above solution doesn’t work, please repeat these steps to pair again. If it still doesn’t work, please don’t hesitate to contact our service team for help.

Power Saving Mode

Note

• When you aren’t using the Keyboard, it goes to sleep to conserve power.
• Press any button and wait 3 seconds to reactivate it.
• If you won’t be using your keyboard for an extended period, turn it off to conserve even more power.

Important Safeguards and Precautions

1. SAVE THESE INSTRUCTIONS – They contain essential safety and operating instructions.
2. For indoor use only. Do not expose the keyboard to direct sunlight or wet conditions.
3. Do not use the keyboard if equipment is damaged.
4. Do not disassemble the product. Disassembly can result in safety hazards.
5. Do not throw or shake the product.

Web: www.tecurs.com
E-mail: gamesupportservice@tecurs.com

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>