Lifestyle advanced LK-S801C-6 High Definition Wireless Soundbar Speaker User Manual
- June 1, 2024
- lifestyle advanced
Table of Contents
Lifestyle advanced LK-S801C-6 High Definition Wireless Soundbar Speaker
Important Safety Instructions
WARNING: To reduce the risk of electric shock, do not dismantle the product and do not expose the product to rain or moisture user-serviceable parts inside. Refer servicing to qualified personnel only.
- Read the user manual before use. Keep all instructions for future reference
- Always operate the product from a power source of the same voltage, frequency and rating as indicated on the rating label.
- This product is intended for indoor. household use only.
- To protect against electric shock: do not immerse unit, plug or cord in water or spray with liquids; do not place unit on windowsills or other places where it may be exposed to dripping or splashing of water; do not place vases or similar objects filled with liquids near the unit.
- Do not use this product in the immediate vicinity of water such as bathtubs, washbowls, swimming pools etc. where the likelihood of immersion or splashing occurs,.
- Keep the unit away from heat sources like radiators, heat registers, stoves or other products that produce heat. No open flame sources like candles should be placed on the unit.
- Use only with attachments/accessories specified by the manufacturer. Use of attachments/accessories not recommended can be hazardous.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- This product is not a toy! Children should be supervised to ensure that they do not play with the appliance.
- Do not cover the unit during use. Do not impede ventilation by covering ventilation openings with cloths, curtains or similar Items.
- Do not operate the product with a damaged cord or plug or if the product malfunctions, or is dropped or damaged in any manner.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons In order to avoid hazard.
- For safety reasons, do not remove any covers or attempt to access the inside of the product.
- Do not clean the unit with any harsh chemicals as this might damage the finish. Wipe clean with a dry cloth.
- When removing the power plug from the wall outlet, always pull directly on the plug; never pull on the cord.
- Do not expose the batteries to excessive heat, direct sunlight, fire or similar.
- Do not throw used batteries in your household rubbish. Dispose of it responsibly according to local regulations.
Remote Control Description
Front/Back panels
FRONT
-
/MODE
Power On/Off (long press) Mode (USB, TF, AUX, FM Radio) (short press) -
VOL-/
Volume down (long press) / Previous (short press) -
VOL+/
Volume up (long press) / Next (short press) -
- Pause/Play In bluetooth mode, long press to disconnect.
-
Double-click, while in bluetooth mode, when there is next to another duplicate soundbar to establish true wireless functionality. Double-click in clock mode to alternate between 12HR and 24HR clock.
-
U disk/TF long press to loop single/all loops In clock mode, short press to adjust time, long press to save time.
-
Press and hold for 10-15 seconds to restore factory settings.
-
TF (Micro SD Card)
Port for TF keys (32 GB maximum) -
USB Flash Drive
Port for USB keys (32 GB maximum) -
AUXPort
Audio input -
DC 5V = (Charging Port)
Quick Start Guide
In your, phone’s Bluetooth settings select “LIFESTYLE ADVANCED SDUNDBAR” to pair.
Bluetooth Mode:
- On the Soundbar, press the ‘MODE’ button repeatedly until Bluetooth Mode is selected. The display will say ‘BL’
- On your Bluetooth-enabled device, power on Bluetooth to search for the device. Select ‘LIFESTYLE ADVANCED SOUNDBAR’, The display will blink, indicating that it is waiting to pair. Once pairing is successful, the display will stop flashing and display ‘BL’.
- Now you can play music from your Bluetooth-enabled device on the soundbar. Press the or button on the remote control to play the previous or next song.
Aux Input
If using the Aux cable, connect the Speaker to the audio equipment, select ‘AU
by using the Mode key on the remote control or the Power/Mode key on the side
panel of the soundbar. ‘AU’ will be displayed accompanied by ‘AUX’ voice
prompt.
CLOCK
- When the soundbar is on, short press the “MODE” button to switch to the clock mode. Short press to adjust the time. Long press to save the time. Double-click ****to switch between 12-HR & 24-HR option.
- After the Soundbar is initially paired with your smartphone, a permission request will pop up requesting permission to read text messages. After clicking allow, the time on the soundbar will automatically sync with the time on your smartphone.
FM Radio
Plug in the AUX Cable as an antenna before searching for radio channels. Press
the mode button till you are prompted to FM. Short press the play button to
mute and long press the play button to automatically search for radio
channels.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followina measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be
at least 20 cm between the radiator and your body, and fully supported by the
operating and installation.
Connection schematic
RECOMMENDED PLACEMENT
Soundbar: Under the TV(if wall-mounted)/in front of the TV.
Speaker Specification
- Soundbar Rated Power: 10W+10W (20W Total)
- Input Voltage: 5V = 1A
- Power consumption: 20W
- Battery: 3.7V 2400mA
- Input signal source: Optical, AUX, USB, TF, Bluetooth
- Dimensions for sound bar: 24″ x 2.4″ x 2.4″
- ACCESSORIES: Remote control, AUX Cable, Type-C Cable
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>