dji 964CPMA500 Mini 3 Pro Two-Way Charging Hub User Guide

dji 964CPMA500 Mini 3 Pro Two-Way Charging Hub

Product Information

The DJI Mini 3 Pro Two-Way Charging Hub is a versatile device designed for charging Intelligent Flight Batteries and using them as power banks. It features a USB port for connecting and charging external devices, a power port (USB-C) for connecting to a charger, a function button for checking battery power level and switching charging priority, and status LEDs that indicate battery levels and charging status.

Key Features:

• Two-way charging: charges Intelligent Flight Batteries and uses them as power banks
• USB port for connecting and charging external devices
• Power port (USB-C) for connecting to a charger
• Function button for checking battery power level and switching charging priority
• Status LEDs for indicating battery levels and charging status

Compatibility:
The DJI Mini 3 Pro Two-Way Charging Hub is compatible with the DJI Mini 3 Pro drone and its Intelligent Flight Batteries.

Important Note:
It is recommended to use a USB Power Delivery charger and cable for fast charging.

Product Usage Instructions

Charging Intelligent Flight Battery Scenario:
Inserting the battery into the charging hub and connecting it to a power outlet.

1. Insert the Intelligent Flight Battery into the battery port of the charging hub until you hear a click.
2. Connect the charging hub to a power outlet using a USB Power Delivery charger.
3. The charging hub will prioritize charging the battery with the highest power level first, followed by the rest in sequence.
4. Once a battery is fully charged, the corresponding LED will change to solid green.
5. To remove a fully charged battery, refer to Figure A2 in the user manual.

Using Intelligent Flight Batteries as Power Banks Scenario:
Using the charging hub to charge external devices using the power from Intelligent Flight Batteries.

1. Insert an Intelligent Flight Battery into the battery port of the charging hub.
2. Do not connect the charging hub to a charger.
3. Connect an external device to the USB port of the charging hub to charge the device.
4. The charging hub will discharge the battery with the lowest power level first, followed by the rest in sequence.
5. The status LEDs on the charging hub will display the power level of the battery supplying power to the external device being charged.
6. If charging does not start automatically, press the function button to activate charging.

Switching Devices to Charge Scenario:
Charging both an Intelligent Flight Battery and an external device simultaneously and switching between them.

1. Connect both the Intelligent Flight Battery and the external device to the charging hub for charging.
2. The charging hub will prioritize charging the battery before the external device.
3. To prioritize charging external devices, press and hold the function button on the charging hub for two seconds.
4. If an external device is fully charged or has been charged for 4 hours, the charging for Intelligent Flight Batteries will continue.
5. When charging an external device, press and hold the function button for two seconds to switch back to charging Intelligent Flight Batteries.
6. Note: The charging hub may not be able to detect whether the external device is fully charged if it has high standby power consumption. In this case, charging will not switch to Intelligent Flight Batteries until the external device has been charged for four hours. Users can manually switch the charging priority by pressing and holding the function button for two seconds.

Carefully read this entire document and all safe and lawful practices provided before use.

• Place the charging hub on a flat and stable surface when in use. Make sure the device is properly insulated to prevent fire hazards.
• DO NOT attempt to touch the metal terminals on the hub. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.

Overview

1. USB Port
   Connect and charge external devices such as a remote controller or mobile phone.

2. Power Port (USB-C°
   Connect to a charger. Recommend using a USB Power Delivery charger.

3. Function Button
   Press to check the battery power level. Press and hold the function button for two seconds to switch the charging priority.

4. Status LED
   The status LEDs display battery levels for three seconds after the batteries are inserted into the charging hub. The LEDs in an array blink successively during charging. The slower the LEDs blink, the slower the charging speed. It is recommended to use a USB Power Delivery charger and cable for fast charging. The LEDs in an array change to solid green after the corresponding battery is fully charged. The LEDs status and description is the same as the one for the battery-level LEDs on the aircraft. Refer to the Dul™ Mini 3 Pro User Manual for more information.

Usage

DJI Mini 3 Pro Two-Way Charging Hub can be used in the following scenarios:

1. Charging Intelligent Flight Battery (Figure A1)
   Insert the battery into the battery port until there is a click and connect the charging hub to a power outlet. The Intelligent Flight Battery with the highest power level will be charged first and the rest will be charged in sequence according to their power levels. After the battery is fully charged and the corresponding LEDs change to solid green, remove the battery from the charging hub as shown in Figure A2.

2. Using Intelligent Flight Batteries as Power Banks (Figure B)
   Insert the Intelligent Flight Battery into the charging hub Without connecting the hub to a charger, then connect any external device to the USB port to charge the device. The Intelligent Flight Battery With the lowest power level will be discharged first and the rest in sequence according to their power levels The status LEDs will display the power level of the battery that supplies power when the external device is bemg charged.

3. Switching Devices to Charge (Figure C)
   When both the intelligent flight battery and an external device are connected for charging, the battery will be charged before the external device Press and hold the function button on the charging hub for two seconds to prioritize charging external devices. The charge for Intelligent Flight Batteries will be continued after the external device Is fully charged or it has been charged for 4 hours When charging an external device, press and hold the function button for two seconds to switch back to charging Intelligent Flight Batteries.

   • The charging hub may not be able to detect whether the device is fully charged when charging an external device with a high standby power consumption such as a smartphone or tablet. In this case. charging will not switch to Intelligent Flight Batteries until the external device is charged lor four hours Users can manually switch the charging priority by pressing and holding the function button for two seconds.
   • When the input of the charging hub is lower than 5V/2A, there is a possibility that the USB port will be unable to charge the external devices.

Specifications

• Model Number CHX162-30
• Supported Charger USB Power Delivery charger
• Supported OJI Battery
  • OJI Mini 3 Pro Intelligent Flight Battery (BWX162-2453-7.38)
  • OJI Mini 3 Pro Intelligent Flight Battery Plus (BWX162-3850-7.38)
• Input 5V=3A, 9V:::3A, 12V=3A
• Output (USB) 5V=2A
• Operating Temperature 5° to 40° C (41° to 104° F)

WE ARE HERE FOR YOU

Contact
OJI SUPPORT

https://www.dji.com/mini-3-pro/downloads.

dJI is a trademark of DJI.
USB-C is a registered trademark of USB Implementers Forum.

Copyright© 2022 OJI All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>