Avantree AKB3518E600G Wireless Headphone Transmitter Set User Manual
- June 14, 2024
- Avantree
Table of Contents
Wireless headphone transmitter set for tv
User Manual
Model: AKB3518E600G
In the box
Control functions
| Power ON| Hold for 2s.
---|---|---
Power OFF| Hold for 5s.
Pairing mode| Press and hold for 2s.
Reset| Hold for 7s to clear the paired devices, then enter pairing mode
automatically.
1|
| LED Indicator| Bluetooth status indicator.
---|---|---|---
2|
| Power ON| Press and hold the button for 2 seconds.
Power OFF| Press and hold the button for 5 seconds.
Pairing Mode| Press and hold the button for 5 seconds until LED lights blinks
red and We alternatively (When power off)
Voice Assistant| Double click the button.
Play / Pause| Short press the button once.
3|
| Volume +| Press once.
4|
| Volume –| Press once.
5|
| Microphone Mute
(use with phone only)| WHEN CALLING: Hold 2s. (Hold 2S again to exit)
6|
| Charging Indicator| The LED will turn RED while charging and turn off once
charging is complete.
7|
| Type-C Charging Port| You can n charge using charger (5V/50OrnA-2A output), PC/TV USB port using the included USB cable.
| Reset| Hold + button for 5s,LED flashes purple for 3 times, then blinks red and blue alternatively.
Wiring scheme
For TVs with SPDIF port
-
If you want to use the “OPT/Coaxial’ mode of the TV, please dial the button to the audio mode of “SPDIF’
-
Connect the “OPT/Coaxial” audio cable to the RT5007 transmitter and the TV audio port correctly.
Note: If there is no sound in “OPT/Coaxial” mode, please set your TV output audio to “PMC”. -
If you want to use the bypass + TX mode at the same time under SPDIF mode, please use ‘OPT’ input and output.
For TVs with AUX/RCA port
- If you want to use the “AUX/RCA” mode of the TV, please dial the , to the audio mode of AUX’.
- Connect the “AUX/RCA® audio cable to the RT5007 transmitter and the TV audio port correctly.
For PCs with USB port
- If you want to use the “USB” mode of the PC, please dial the to the audio mode of’ USB”.
- Connect the “USB” cable to the RT5007 transmitter and the PC usb port correctly.
Headphones Connection
Turn on the headphone – Press and hold the button for 2 seconds. wait for them automatic connect automatically, Now you can start enjoying the audio.
TV Set Up
For using TV SPDIF port REMOTE CONTROL
Go to SETTINGS > Audio > Optical / Digital Out For using TV SPDIF port
For using TV SPDIF port REMOTE CONTROL
Digital Audio Format > PCM Stereo OR Dolby – OFF
Note: Need to make sure TV audio format is set to PCM and TV sound out as “External Speakers”
Use with phone
Charging the headphone
Wired mode
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
CE
ANKBIT international. hereby declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
In accordance with Article 10(2) and Article 10(10), this product is allowed
to be used in all EU member states.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre.
DO not dispose the used appliance together with household waste.
eVatmaster Consulting GmbH Bettinastr. 30
60325 Frankfurt am Main, Germany
contact@evatmaster.com
Operator: Ankbit International Limited
Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist.,
Shenzhen, China
FCC ID:2AUFR-RT951
MADE IN CHINA
Documents / Resources
|
Avantree AKB3518E600G Wireless Headphone Transmitter
Set
[pdf] User Manual
AKB3518E600G Wireless Headphone Transmitter Set, AKB3518E600G, Wireless
Headphone Transmitter Set, Headphone Transmitter Set, Transmitter Set
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>