BLUEFIN E-Swift 20PSI Air Pump Instruction Manual

: June 14, 2024
: BLUEFIN

Table of Contents

BLUEFIN E-Swift 20PSI Air Pump.
PARTS LIST
INFLATION PROCESS
DEFLATION PROCESS
TROUBLESHOOTING
SAFETY
PRECAUTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLUEFIN E-Swift 20PSI Air Pump.

WELCOME TO THE CLUB
Hey,

Welcome to the Bluefin SUP community! We’re glad to have you on board. Your journey with us doesn’t end at the point of purchase.
As a member of our community, you’re entitled to many benefits including lifetime support from our customer service team and an extended warranty on all our products.
Remember to activate your warranty by scanning the OR code (see ‘Breakdown cover”‘) or by visiting our website.
We hope you enjoy your product and choose to explore the full Bluefin SUP range. To get the best of your product, we recommend that you read and refer back to the contents of this manual.
You can also find additional help and resources at www.bluefinsupboards.com.

PARTS LIST

Inflation outlet
Deflation inlet
Pressure value display
On/Off button
Pressure increase button
Pressure decrease button
Pressure unit toggle button
Silicone power cover
Power input
Webbing handle
Pump hose fixing
Pump hose
Hose nozzle adapters
Power connector
12V Power adapter
Battery power clips

INFLATION PROCESS

Connecting The Hose
Connect the pump hose fixing to the inflation outlet and twist clockwise to tighten it, as Figure 1. Install the required nozzle adapter to the other end of the hose and twist clockwise to tighten it. Insert the nozzle adapter into the inflatable and twist it clockwise to fix it as in Figure 2. Some inflatables need a different nozzle adapter please check the manufacturer’s guidance on this before choosing the correct one.

Connecting The Power
Lift the silicon power input cover and insert the power connector into the power input on the pump as Figure 1. Insert the 12V power adapter into a 12V DC socket as Figure 2a. Alternatively, connect the battery power clips to a battery on its positive and negative poles (the red color to the positive pole and the black color to the negative pole as Figure 2b.

Operating The Pump
Press the pressure unit toggle button PSI BAR to select the one you need. Press the pressure increase button + or decrease button – to set the required pressure value you need. The pressure value can range from 0 to 20PSI.

After finishing the above steps, press the On/Off button & to start to inflate. During the inflation process, you can press the pressure increase or decrease button to change the pressure value. Press the pressure unit toggle button to switch the unit, and press the On/Off button to stop. Press and hold the On/Off button for 3 seconds to start the pump using the most recently used pressure value.

Check that this does not exceed the limit for your current inflatable to avoid causing any damage.”
When the pressure reaches the set value, the air pump will stop working automatically.

DEFLATION PROCESS

Switching To Deflate
Remove the hose from the inflation outlet. Connect the pump hose fixing to the deflation inlet on the pump, and twist clockwise to tighten it, as Figure 1. Connect the nozzle end of the hose to an inflatable.
Press the On/Off button on the pump to start the deflation function until all the air is removed, then press the On/Off button to stop the deflation.

TROUBLESHOOTING

SAFETY

The applied power source must be the 12V DC power source as Figure 1.

Do not block the inflation outlet and deflation inlet, and ensure that the inflation outlet and deflation inlet shall remain smooth at all times.
Disposal: Do not dispose of this product as unsorted waste. It must be collected separately for special disposal.
Do not use this product when the hose is damaged. Please change the hose immediately. Do not pull out the hose when inflating, this may cause physical bodily injury.
Don’t use the air pump work for more than 20 minutes, this may cause the motor to overheat and create internal damage. Let the air pump cool for 30 minutes after being used continuously for 30 minutes.
Do not use the air pump if any part is damaged, please contact Bluefin customer service. In order to prevent risk, do not point the inflation inlet at the face or body.
Please do not leave it unattended whilst inflating.

PRECAUTIONS

Warning In order to reduce the risk of injury, please keep children away from the pump and any power wires. Always supervise children when using the pump.
Warning The pump should be kept away from and not submerged in water.
Warning Before moving, maintaining, repairing or adjusting this product, please first pull out the DC plug from the socket.
Warning: Make sure the power wire is safe when in use and cannot be damaged by any other equipment.
Warning If the power wire is damaged, the pump must not be used.
Warning If you are standing in a place with water or your hands are wet, please don’t use the power cable.
Warning Before inflating, please check the maximum bearable pressure of the inflatable product to prevent any damage.
Warning Before using the 12V adapter, please check the 12V socket to make sure that there is no rust or residue inside. Poor electrical conduction may cause over-heating of the product or power source, which will damage the pumps.
Warning Use the product responsibly and follow all guidance in the instruction book.
Warning. Do not use the product around any flammables.
Warning Use the product at an ambient temperature of no more than 40 degrees
centigrade.
Warning Make sure the hose, the switch, the 12V power adapter and the digital display
work prior to USC.
Warning Keep away from heat sources, humidity, dust and direct sunlight.
Warning Do not throw this product into a fire for risk of explosion or other danger.
Do not use it under wet conditions.
Do not put any objects into the inflation and deflation connectors
To reduce the risk of electric shock.
Do not expose to rain.
Store indoors.
Risk of injury – do not direct airstream at face or body.
Do not continuously operate the pump for over 20 minutes.
The pump must stop to cool down for 30 minutes after continuous use.

Correct disposal of this product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment of human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.