BLUEFIN SUP E-Swift Lite Electric Pump Instruction Manual

June 1, 2024
BLUEFIN SUP

BLUEFIN Logo INSTRUCTION MANUAL
E-SWIFT LITE
20 PSI AIR PUMP

E-Swift Lite Electric Pump

WELCOME TO THE CLUB
Hey,
Welcome to the Bluefin SUP community! We’re glad to have you on board. Your journey with us doesn’t end at the point of purchase.
As a member of our community, you’re entitled to many benefits including lifetime support from our customer service team and an extended warranty on all our products.
Remember to activate your warranty by scanning the QR code (see ‘Breakdown cover’) or by visiting our website.
We hope you enjoy your product and choose to explore the full Bluefin SUP range. To get the best of your product, we recommend that you read and refer back to the contents of this manual.
You can also find additional help and resources at www.bluefinsupboards.com.
The Bluefin SUP team

PARTS LIST

BLUEFIN SUP E-Swift Lite Electric Pump - Part List

1. Inflation inlet
2. Deflation outlet
3. 12V power adapter
4. Pressure value LCD screen
5. Pressure unit toggle button
6. Increase pressure button| 7. Decrease pressure button
8. On/off button
9. Handle
10. Pump hose fixing
11. Pump hose
12. Hose nozzle adapters
---|---

INFLATION PROCESS

Connecting The Hose
Connect the pump hose fixing to the inflation outlet and twist clockwise to tighten it, as Figure 1. Install the required nozzle adapter to the other end of the hose and twist clockwise to tighten it. Insert the nozzle adapter into the inflatable and twist clockwise to fix it as Figure 2. Some inflatables need a different nozzle adapter so please check the manufacturer’s guidance on this before choosing the correct one.![BLUEFIN SUP E-Swift Lite Electric Pump

Operating The Pump
Press the pressure unit toggle button to select the PSI you need. Press the increase pressure button or decrease pressure button to set the required pressure value you need. The pressure value can range from 0 to 20PSI. After finishing the above steps, press the On/Off button to start to inflate. During the inflation process, you can press the increase or decrease pressure button to change the pressure value. Press the pressure unit toggle button to switch the unit, and press the On/Off button to stop. Press and hold the On/Off button for 3 seconds to start the pump using the most recently used pressure value.
*Check that this does not exceed the limit for your current inflatable to avoid causing any damage. When the pressure reaches the set value, the air pump will stop working automatically.

DEFLATION PROCESS

Switching To Deflate
Remove the hose from the inflation outlet. Connect the pump hose fixing to the deflation inlet on the pump, and twist clockwise to tighten it, as Figure 1. Connect the nozzle end of the hose to an inflatable. Press the On/Off button on the pump to start the deflation function until all the air is removed, then press the On/Off button to stop the deflation. BLUEFIN SUP E-Swift Lite
Electric Pump - Figure 3

TROUBLESHOOTING

Fault Inspection Solution
The pump will not start. The power is not connected properly. Make sure that

the power cord is plugged into a 12V DC electric outlet.
The motor is overheated or overloaded, causing motor stalling.| Allow the motor to cool before restarting.
Slow or abnormal inflation.| Check whether the hose is blocked or cracked.| Make sure the hose is not blocked, and check whether the hose is cracked.
The joint between the hose and air pump or air bag is not installed properly.| Reinstall the hose.
E2 on the display.| Forced shutdown when the temperature has reached 100.| Allow the motor to cool before restarting.
E3 on the display.| Shutdown protection without increasing air pressure.| Check for air leaks.
U-L/ U-LO/ RRRO on the display.| Voltage ≤ 8V| The voltage of power supply is low.
If the voltage returns to 10.5V, it will release voltage protection state automatically.| The power supply is insufficient and the line has limited current.
ower adapter overcurrent protection. Special adaptern required (150W unlimited stream).
U-H/ U-HI/ RRRO on the display.| Voltage ≥ 15V| Overvoltage input.
If the voltage returns to 14.5V, it will release voltage protection state automatically.
T(7) RRRO on the display.| Forced shutdown when the temperature has reached 85°C,. When it drops to 60°C, it will work again automatically.| Need heat dissipation
PPPP on the display.| Pressure protection make the pump stop, and LCD screen displays PPPP and flashes. Press any key to exit this state.| Check for air leaks.

  • If the problem cannot be solved, please contact the Bluefin customer service team.

SAFETY

The applied power source must be the 12V DC power source as Figure 1.

BLUEFIN SUP E-Swift Lite Electric Pump - Figure 4 Figure 1.

Do not block the inflation outlet and deflation inlet, and ensure that the inflation outlet and deflation inlet shall remain smooth at all time.
Disposal: Do not dispose of this product as unsorted waste. It must be collected separately for special disposal.
Do not use this product when the hose is damaged. Please change the hose immediately. Do not pull out the hose when inflating, this may cause physical bodily injury.
Don’t use the air pump work for more than 20 minutes, this may cause the motor to overheat and create internal damage. Let the air pump cool for 30 minutes after being used continuously for 30 minutes.
Do not use the air pump if any part is damaged, please contact Bluefin customer service. In order to prevent risk, do not point the inflation inlet at the face or body.
Please do not leave unattended whilst inflating.

PRECAUTIONS

  • Warning: In order to reduce the risk of injury, please keep children away from the pump and any power wires. Always supervise children when using the pump.
  • Warning: The pump should be kept away from and not submerged in water.
  • Warning: Before moving, maintaining, repairing or adjusting this product, please first pull out the DC plug from the socket.
  • Warning: Make sure the power wire is safe when in use and cannot be damaged by any other equipment.
  • Warning: If the power wire is damaged, the pump must not be used.
  • Warning: If you are standing in a place with water or your hands are wet, please don’t use the power cable.
  • Warning: Before inflating, please check the maximum bearable pressure of the inflat- able product to prevent any damage.
  • Warning: Before using the 12V adapter, please check the 12V socket to make sure that there is no rust or residue inside. Poor electrical conduction may cause over-heating of the product or power source, which will damage the pumps.
  • Warning: Use the product responsibly and follow all guidance in the instruction book.
  • Warning: Do not use the product around any flammables.
  • Warning: Use the product at an ambient temperature of no more than 40 degrees centigrade.
  • Warning: Make sure the hose, the switch ,12V power adapter and the digital display work prior to use.
  • Warning: Keep away from heat sources, humidity, dust and direct sunlight.
  • Warning: Do not throw this product into a fire for risk of explosion or other danger.
  • Do not use under wet conditions.
  • Do not put any objects into the inflation and deflation connectors
  • To reduce the risk of electric shock.
  • Do not expose to rain.
  • Store indoors.
  • Risk of injury – do not direct airstream at face or body.
  • Do not continuously operate the pump for over 20 minutes.
  • The pump must stop to cool down for 30 minutes after continuous use.

Correct disposal of this product
**** This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment of human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

BLUEFIN Logo 1 BREAK DOWN COVERbluefinsupboards.comBLUEFIN SUP
E-Swift Lite Electric Pump - Figure 5

ACTIVATE WARRANTY
Or visit Bluefinfitness.com/activate

BLUEFIN SUP E-Swift Lite Electric Pump - QR https://qrco.de/bcfHCz

UK IMPORTER ADDRESS:
Bluefin Trading Ltd, Keelham Farm, Hebden Bridge, UK, HX7 8TG| EU IMPORTER ADDRESS:
Comply Express Unipessoal Limitada, StartUp Madeira, EV141, Campus da Penteada, 9020 105 Funchal, Portugal| USA IMPORTER ADDRESS:
Bluefin Trading International LLC
3500 South DuPont Highway, Suite 300, Dover, DE 19901
---|---|---

BLUEFIN Logo BLUEFIN SUP AIR PUMP
MODEL: E-SWIFT LITE 20PSI AIR PUMP
RATED VOLTAGE: DC 12V **110W
WEBSITE:BLUEFINFITNESS.COM
MADE IN CHINABLUEFIN SUP E-Swift Lite Electric Pump - Icon
8**

Documents / Resources

| BLUEFIN SUP E-Swift Lite Electric Pump [pdf] Instruction Manual
E-Swift Lite Electric Pump, Electric Pump, Pump
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals