BLUEFIN FITNESS 221229 Kick FIT Home Treadmill User Manual

BLUEFIN FITNESS 221229 Kick FIT Home Treadmill User Manual

S A F E T Y INFORMATION

PLEASE READ THIS USER GUIDE BEFORE FIRST USING YOUR KICK FIT. IT IS IMPORTANT TO KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

• This appliance can be used by children aged from 8 years and above and person with reduced physical or sensory or mental capabilities or lack of knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Only use accessory items recommended by the manufacturer.
• CAUTION the instructions must be followed carefully in the assembly, use and maintenance of the equipment.
• Keep hair, fingers and loose clothing away from moving parts to avoid serious injury.
• This product is intended for home use only.
• Always consult your SP before undertaking any exercise programme.
• This product is not suitable for therapeutic purposes.
• Do not use the product in humid or dusty environments to avoid any risk of electric shock.
• Do not use the product if temperature exceeds 40°C/104°F.
• Ensure the product is on a flat and dry surface before use.
• Only use accessory items recommended by the manufacturer.

Home use only. This equipment should not be stored outdoors, in a garage or an outbuilding. Keep the equipment in a dry place with as little temperature variation as possible.

WARNING:
This product can expose you to chemical including [lead], which is known to the State of California to cause cancer, and [Bisphenol A], which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

COMPONENT LIST

ASSEMBLY INSTRUCTIONS

M820 SCREW
M820 FLAT GASKET

1. Assembly of the treadmill
   Take it out of the box; hold the display housing and slowly lift it to fixed screw hole; fix M8*20 screw and M8 flat gasket on left and right columns.
   

2. Lift the display housing; Fix the upper treadmill stand column onto the base at the rear with M820 screw and M8 flat gasket; Fix the column onto the base support with M855 screw and M8 flat gasket;
   
   ASSEMBLY INSTRUCTIONS

3. Fix left and right side covers on both sides of columns.
   

OPERATING INSTRUCTION

1. Place the treadmill on a level open ground.
2. Insert power plug into the wall socket and turn on power switch a (light turns red). You will hear a “beep” and the display will tunr on; Fig 1.
3. Check whether the data displayed on the screen is abnormal,and stand on the anti-slip side rail before clicking start to prevent accidental falls.
4. Place the safety key at yellow position on the upper console housing and clamp the emergency key onto your clothes, (Note:The position where the emergency key clamped should not be easily touched when running) then start the treadmill. Fig 2.
5. “START” button: Press this button to start the treadmill.
6. “STOP” button: Press this button to stop the machine and then the machine will stop smoothly. The speed will decrease from your current maximum speed to stop.
7. “SPEED” button: Adjust the speed. Press the speed plus button to increase the speed and press the speed minus button to reduce the speed.
   

OPERATING INSTRUCTION

LCD WINDOW DISPLAY
SPEED: Display the speed
INCLINE: Display the incline
TIME: Display the time
DIS.: Display the distance
CAL.: Display the calories
PULSE: Display the heart rates

• MP3 FUNCTION
  When connected to an external MP3 or other audio device, music can be played. The volume adjustment of playing music should be carried out on external MP3 or other audio equipment. Please pay attention to volume and avoid damaging the speakers by turning up the volume too high.

• USB FUNCTION
  When the USB flash disk is plugged into the console, music can be played in MP3 format through the speaker

• BUTTON FUNCTION
  “PROG.” button : Press this button to choose a program from manual mode—P1–P12–U1–U3–FAT;
  “MODE” button: When the machine is in standby mode, press this button to choose the mode: mode-time count down, mode-distance count down, mode-calories count down;
  “START” button: Press this button to start the machine, the machine will run at the lowest speed or at the speed of default program after 3 seconds time count down;
  “STOP” button: Press this button to stop the machine, the machine will stop smoothly;
  “SPEED+” ,“ SPEED-” : Adjust the speed. Press the button to adjust the speed when running.
  “INCLINE+” ,“ INCLINE-” : Adjust the incline. Press the button to adjust the incline when running, and adjust the data when stop;

MODES

1. When the console is in standby state, press this key to enter time reversal mode
2. Under the setting “body fat test”, press this key to enter the next parameter setting
3. Operation process in standby mode: time backward meter – distance backward meter – calorie backward meter – return
4. Operating procedure under body fat test setting: set gender – set age – set height – set weight – Set body fat test

A. MANUAL MODE FUNCTION
Enter manual mode: after the console is fully displayed, enter the initial standby mode. At this point, press
the Start button to enter the operation of manual mode.

Operation description : the initial operation speed is 1.0km /H, time, distance, calorie window is counted from zero, according to the speed Adjust key you can adjust the size of the running speed value, press the rise and fall adjust key to adjust the size of the running slope value.

If the exercise time exceeds 99:59 minutes, the system does not stop, the time starts from zero time again.

B. FUNCTION OF TIME REVERSAL MODE

1. Enter the time reversal mode: In the initial standby state, press the mode key to select the time  inversion mode. The time window will display 30:00 minutes and flash the display to set the required running time through the speed +/- key. Run: the initial speed of 1.0 KM/H is set according to the running time of the display, distance and starting from scratch is countied in the calories window, press speed adjustment to adjust the speed value. The lift adjustment can  be changed using the Lift key.
2. Enter the distance backward mode: in standby mode, press the mode key to select the chosen distance The distance window will display 1.0km and will flash. Run: the initial speed of 1.0 KM/H, set according to the distance from the window begins to count down, calories and time window will begin counting from scratch, press speed adjustment to adjust the speed value, The lift adjustment can be changed using the Lift key.
3. Enter calorie counting mode: In the initial standby mpde, press the mode button to select calorie counting mode, then the calorie window displays 50 and flashes (the required operating calories can be set through the speed +/- button, and the range is 20-990). Press the Start button to enter the operation of calorie counting mode. Run: the initial speed of 1.0 KM/H is set according to the calories count window, window of time and distance begin counting from scratch.

C. AUTOMATIC PROGRAM FUNCTION
Enter automatic program: In the initial standby mode, press program key to enter automatic program selection. At this time, the time window displays 30:00 minutes and flashes (the required running time can be set through the speed +/- key, and the setting range is from 8:00 to 99.00 minutes). Press start key to enter the operation of automatic program.

PROGRAMMES

BODY FAT TEST MODE

1. 1. When the console is in standby mode, press this key to enter automatic program mode.
2. After entering the program settings, continue to operate this key to enter the “body fat test” mode
   • The heartbeat window displays: parameter function (-x -)
   • The calorie window displays set value. Press speed +/- to adjust the set value, and press mode to enter the next setting.
   • The first item is gender (-1-) setting: initial value 1 (set range 1~ 2,1 means male; 2 for women)
   • The second item is the age (-2-) setting: the initial value is 25 (the setting range is 10-99 years old)
   • The third item is height (-3-) Setting: initial value 170 (setting range 100~220CM)
   • The fourth item is weight (-4-) Setting: initial value 70 (setting range: 20~150KG)
   • The fifth item is the body fat (-5-) test: show —

Body fat test: When the setup is completed, enter the 5th body fat test, and the initial display is “”–“”. Hold the heart beat test steel sheet with both hands for about 5 seconds, and the body fat test index will be displayed.

The body fat index is a measure of a person’s height and weight, suitable for any men and women, together with other health indicators, the ideal body fat index must be between 20 ~ 25, if it is less than 19, the weight is tincorrectt, if it is between 26 ~ 29, it means overweight, and if more than 30, it means obesity (note: the data is for reference only, not medical data).

WA R M U P AND C O O L D O W N

TO PREVENT INJURIES, YOU SHOULD ALWAYS WARM-UP AND COOL-DOWN WITH VARIOUS STRETCHES BEFORE AND AFTER EACH WORKOUT.

WE RECOMMEND THE FOLLOWING STRETCHES, WHICH WILL REDUCE  THE RISK OF ANY MUSCLE INJURY OR SPASM DURING EXERCISE. NEVER OVERSTRETCH OR PULL YOUR MUSCLES.

SIDE BENDS
Pass one arm up and over your head, bending your upper body in the same direction. Hold this position for 10 to 15 seconds and slowly straighteny ourself back up. Repeat this 3 times for each side.

TOE TOUCH
Slowly bend forward from your waist, letting your back and shoulders relax as you stretch towards your toes. Reach down as far as you can go and hold for 15 seconds. Then relax and repeat 3 times

CALF-ACHILLES STRETCH
Lean against a wall with your left leg in front of the right and your arms on the wall. Keep your right leg straight and your left foot on the floor, bend the left leg and lean forward by moving your hips toward the wall. Hold, then repeat on the other leg for 15 seconds. Repeat 3 times for each leg.

QUADRICEPS STRETCH
With one hand against a wall for balance, reach behind you and pull your right foot up. Bring your heel as close to your buttocks. Hold for 10-15 seconds. Repeat three times for each foot.

INNER THIGH STRETCH
Sit with the soles of your feet together and your knees pointing outwards. Pull your feet as close to your groin as possible. Gently push your knees towards the floor. Hold for 15 seconds. Then relax and repeat 3 times.

TROUBLESHOOTING

Er01: indicates abnormal communication between electronic watch and electronic control
The console wire is not connected properly
Er02: indicates abnormal indication of voltage no. between the down control and motor
The motor wire is not connected properly
Er03: indicates the indication of speed anomaly detected by down-control
PWM drive circuit on the down control board failure
Er04: indicates the overvoltage protection information of the down control.
The input voltage of the treadmill exceeds the rated operating voltage of the motor.
E05: indicates that the driving power voltage is too high and an abnormal phenomenon is indicated
The input voltage of the treadmill exceeds the rated operating voltage of the motor.
E06: indicates that the driving power voltage of the lower control no. is too low and an abnormal
phenomenon is indicated
The supply voltage is too low
E07 : indication that the console security lock is not connected properly
The magnetic safety key is not attached properly

TECHNICAL SPECIFICATION

KICK FIT
Model: KICK FIT
Rated Voltage: 220~240v
Rated Power: 800W
Frequency: 50-60hz
Standard: EN ISO 20957-1:2013 & EN957-6:2010+A1:2014
Class: HC
Max User Weight: 110kg

Bluetooth Type: Bluetooth V4.2
Bluetooth Frequency : 2400-2483.5MHz
Maximum Radio-frequency Power: ≤20dBm

ETSI EN 300 328 V2.2.2 (2019-07)
Wideband transmission systems;
Data transmission equipment operating in 2.4GHz ISM band and using wide band modulation techniques; Hamonised Standard covering the essetial requirments of article 3.2 of Directive 2014/53/EU

M A N U FA CTURER WARRANT Y

THE BLUEFIN WARRANTY COVERS ANY TECHNICAL FAULTS WITH YOUR ITEM. IF YOU NEED TO MAKE A WARRANTY CLAIM CONTACT US VIA EMAIL AT:[email protected]

YOUR WARRANTY DOES NOT COVER THE FOLLOWING:

• General wear and marks from use.
• Water damage.
• Damage due to improper use.
• Chassis damage & scratching due to improper use or dropping.
• Electronic damage due to improper use or dropping.
• Your warranty begins on receipt of delivery
• Technical faults are covered for 12 months.

If you have any questions regarding your warranty please email us at: [email protected]

William Vaughan, CEO
Bluefin Trading Ltd.

EU DE L C L A R AT I O N O F C O N F O R M I T Y

For the latest & up-to-date EU declaration of conformity for this product, please visit: www.bluefinfitness.com/manuals/Kickfit_DoC.pdf

USA Importer Address:
Bluefin Trading
International LLC
Wilmington
Delaware
DE19806

UK Importer Address:
Bluefin Trading Ltd
Keelham Farm
Hebden Bridge
UK
HX7 8TG

EU Importer Address:
Comply Express Unipessoal Limitada
StartUp Madeira
EV141, Campus da Penteada
9020 105 Funchal
Portugal

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
Do not dispose of this device with domestic waste. The components of the device must be separately recycled or disposed of according to local regulations. The system operator may also return any waste electrical and electronic equipment to the manufacturer at the end of their lifetime. Charges incurred for transport to the manufacturer will be at the expense of the owner of the waste electrical and electronic equipment.

RECYCLING OF PACKAGING MATERIALS
Do not dispose of packaging with domestic waste. All packaging materials can be safely recycled according to local regulations.

K I N O M A P F ITN E S S A P P

ADDING THE APP

• Search for KINOMAP on your smartphone’s app store and download.
• After the download is complete, open the KINOMAP app and register your personal details.
• Turn Bluetooth on and ensure that the KICK FIT console is powered on and in the wake-up state.
• Sync your KICK FIT to the KINOMAP app as follows:
  

1. Press MORE to bring up the Equipment page, select
   Equipment Management.
   

   ---

2. Press the + icon.
   

3. Select the TREADMILL icon.
   

4. Select the Bluefin Fitness icon.
   

5. Select KICK FIT.
   

6. Add your KICK FIT to complete, start your exercise.
   

DEAR CUSTOMER

THANK YOU FOR CHOOSING THE BLUEFIN FITNESS KICK FIT TREADMILL. TO ENSURE YOU GET THE MOST OUT OF YOUR NEW TREADMILL, PLEASE ENSURE THAT ALL PERSONS USING THE EQUIPMENT READ AND UNDERSTAND THE FOLLOWING MANUAL CAREFULLY BEFORE USE.

BLUEFIN FITNESS ASSUMES NO LIABILITY FOR DAMAGES CAUSED BY IMPROPER USE OR INCORRECT OPERATION.

WE HOPE YOU ENJOY USING YOUR NEW KICK FIT TREADMILL. SHOULD YOU BE INTERESTED IN KEEPING UP WITH OUR EVER-GROWING FITNESS EQUIPMENT RANGE, TAKE A LOOK AT OUR WEBSITE BLUEFINFITNESS.COM AND FOLLOW US ON OUR SOCIALS:

FACEBOOK FACEBOOK.COM/BLUEFINFITNESS
INSTAGRAM @BLUEFINFITNESS
TWITTER @BLUEFIN_FITNESS
LINKEDIN LINKEDIN.COM/BLUEFIN-FITNESS

THE BLUEFIN FITNESS TEAM

References

• Bluefin Fitness: The UK's No.1 for Home Gym Fitness Equipment!
• Domain Name Enquiry
• NameBright - Coming Soon
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>