YI 1080p Dome Guard Indoor Camera User Guide
- June 14, 2024
- YI
Table of Contents
1080p Dome Guard Indoor Camera
User Guide
1080p Dome Guard Indoor Camera
Thank you for
choosing YI Dome Guard
Please read these instructions carefully
What’s in the Box
Getting to Know Your Camera
Note: To enable local recording of video clip, please insert a microSD
card not included) to the slot as shown below. 
Pan/Tilt/Zoom (PTZ) Angle
Range of Activity: Pan/Horizontal: 0° to 355° Tilt/Vertical: up 67° and down
17° 
Pairing Your Camera
Prerequisite:
- Ensure that your cell phone is connected to a 2.4 GHz Wi-Fi network.
- Download the YI Home from the Apple App Store or Google Play.
- Register a YI Home account or log on to an existing YI Home account.
a. Wi-Fi Pairing Steps:
Step 1
Connect the power adapter to an outlet to activate the camera. The camera
indicator will flash red and you will hear the introductory message “Welcome
to YI home”, followed by “Waiting to connect”. When you hear “waiting to
connect”, tap “I heard waiting to connect”.
Note: To install a camera that is previously installed on a different
network or if you change your password, you must reset your camera. Press the
reset button that is located at the bottom of the camera.
Step2
Log into the YI Home App, you can tap the”+” sign to select your device or
scan the camera QR code with your phone.
Step 3
Enter the password of the same Wi-Fi network that is connected to your phone,
then use the YI Dome Guard Camera to scan the QR code that will be generated.
Step4
Tap “Next Step”. You will hear “Pairing is successful” and then the YI Dome
Guard Camera is ready to use.
b. Ethernet Pairing Steps:
In order to use the Ethernet connection, you must first pair the camera to a
Wi-Fi connection and then camera switch to wired connection automation.
– Please connect the Ethernet cable to the camera before pairing.
– If you are pairing the camera via sound waves, increase the volume of your
mobile device and keep it close to the camera.
Reset Wi-Fi Networks
When you need to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:
- Restore your camera to its default settings by press the reset button
- Open the YI Home app on your phone, and connect the camera to your phone again. Your videos stored on your microSD card will not be affected.
Important Safety Guidelines
- Read these instructions carefully.
- Clean only with a dry cloth.
- This camera is for indoor use only.
- Only use the attachments/ accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- To get the best usage out of this product, please consistently update to the latest versions of our app and firmware.
- Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.
Go to: https://www.yitechnology.com/firmware/
Mounting Your Camera (optional)
Prerequisite:
Ensure that the camera is facing the desired direction prior to mounting.
Ensure that the included USB cable can reach the desired mounting location.
Step 1
Use the included screws to install the camera mount on a flat ceiling.
Step 2
Install the camera by twisting and locking it into the mount base.
Specifications
Maximum Resolution:1920 x 1080
Lens: Wide-Angle
Audio: Built-in Mic and Speaker
Photographic Enhancement: 3D Digital Noise Reduction
Wi-Fi: 802. 11 b/g/n, 2.4 G Hz
Alert Modes: Human Detection, Motion Detection
Night Vision: IR Cut+ Non-invasive Infrared LEDs
Support Platforms: Android, iOS, Mac & PC
Wireless Encryption: WEP / WPA/ WPA2
USB Cable Length: 2 Meters
Power Supply: DC 5V / 1A
Power Consumption: 3.5W (max)
Pan/Tilt: 355° horizontally, tilt up 67°, tilt down 17°
Storage: microSD Card and YI Cloud Storage
Operating Temperature: 14F to 122F(-10°Ct0 +50°C)
EU Declaration of Conformity (DOC)
Hereby we: Yi Technology Co.,Ltd., declares that the radio equipment: YRS.3521
is in compliance with Directive 2014/53/EU.
Product Type: YRS.3521
Wi-Fi: 2.4GHz ,802.11b/g/n
Max RF power: 17dBm
Manufacture: Yi Technology Co.,Ltd.
Address: Building 18, NO.55 Change Road, Pudong New District, Shanghai, China
The full text of the EU declaration of conformity is available at the
following internet address: https://kamistore.eu/pages/product-certification
Manufacturer: Yi Technology Co., Ltd
Address: Building 18, NO 55, Change Road, Pudong New District,
Shanghai, P.R. China.
Website: www.yitechnology.com
Privacy: https://www.yitechnology.com/legal/privacy-policy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>