LEVITON D215P Mini Plug In Switch User Guide

LEVITON D215P Mini Plug In Switch

Product Information

The Leviton Decora Smart Wi-Fi Mini Plug-In Switch is a second-generation device that allows easy control of plug-in lamps, electronics, and small appliances. It is compatible with various smart home platforms such as Matter, Amazon Alexa, Google Home,  Apple Home/Siri, and more. The device features built-in scheduling, manual control through a push button, and the ability to create room scenes and activities for a personalized whole-home experience. It operates on 802.11 b/g/n networks with 2.4GHz frequency and supports WPA, WPA2, or WPA3 security protocols. The device can be controlled through the My Leviton app on iOS (version 12.0 or later) and AndroidTM (version 8.0 or later) devices.

Product Usage Instructions

1. Ensure you have a 2.4 GHz Wi-Fi network with high-speed internet.
2. Make sure your mobile device has Wi-Fi and Bluetooth enabled.
3. If using the My Leviton App, create a My Leviton account.
4. If using Matter, ensure you have a Matter controller or hub.
5. Plug the Mini Plug-In Switch into any 120VAC receptacle.
   • Note : Avoid using a switched outlet.
6. When the device powers up, the Status LED/button will flash GREEN to indicate readiness for configuration.
7. Use your smartphone or tablet to confirm a strong Wi-Fi signal in the installation area.
8. Download the My Leviton app from my.leviton.com or scan the provided QR code.
9. Add your device to the My Leviton app by following the setup mode instructions (Status LED blinking GREEN).

For additional assistance, you can visit the Leviton support website at decorasmartsupport.leviton.com, chat with a representative at www.leviton.com/support, email dssupport@leviton.com, or call 1-800-824-3005 (USA) or 1-800-405-5320 (Canada).

• Quick Tip: You can pair a wireless Anywhere Switch Companion (DAWSC) with your Mini Plug-In Switch for wall mount control of plug loads. Refer to the DAWSC Anywhere Switch Companion instructions for connection directions.

Easy Wi-Fi lighting control for the whole home

See the complete line of My LevitonTM app compatible dimmers, switches, plug- ins, and controllers at leviton.com/decorasmart

Welcome

Leviton’s second-generation Decora Smart Wi-Fi Mini Plug-In Switch makes it easier than ever to control plug-in lamps, electronics, and small appliances. Connect to your smart home platform of choice – works with Matter, Amazon Alexa, Google Home, Apple Home/Siri, and more. Use your voice for control or use your mobile device with the My Leviton app even when you’re away from home.
Built-in scheduling lets you turn devices on or off at specific times and a convenient push button provides manual control. Combine your Mini Plug-In with other Decora Smart Wi-Fi devices to create a Whole Home experience with room scenes and activities to match your lifestyle.

We are here to help

• ONLINE decorasmartsupport.leviton.com
• EMAIL dssupport@leviton.com
• CHAT www.leviton.com/support
• CALL 1-800-824-3005 (USA) 1-800-405-5320 (Canada)

Your Mini Plug-In Switch works with

• General purpose loads up to 15 amps, for specific ratings see the chart below.
• Additional self-service support options can be found in the My Leviton app or at leviton.com/decorasmart.

Features

• Shows network connectivity.
• Allows you to turn ON/OFF manually.

What you need to make it work

• A 2.4 GHz Wi-Fi network with high speed internet.
• An iOS (12.0 or later) or AndroidTM (8.0 or later) mobile device.
  • NOTE: Make sure Wi-Fi and Bluetooth are enabled on your mobile device.
• A My Leviton account, if connecting using the My Leviton App.
• A Matter controller or hub if connecting using Matter.

Quick tip
You can pair a wireless Anywhere Switch Companion (DAWSC) to your Mini Plug-In Switch to add wall mount control of plug loads (see page 12). Learn more at Leviton. com/decorasmart or see the DAWSC Anywhere Switch Companion instructions for connection directions.

Installation

1. Insert plug-in switch into any 120VAC receptacle.
   • NOTE : Your Mini Plug-In Switch works with GFCI and AFCI protected receptacles. Do not use in a switched outlet.
2. When device first powers up, the Status LED/button will flash GREEN to show it is ready to be configured.
3. Using a smartphone or tablet, confirm a strong Wi-Fi signal is available in the area in which you are installing your plug-in.

Device setup

• Your Decora Smart Wi-Fi 2nd Gen device can be connected to the My Leviton cloud (see page 8), to Matter using a compatible Matter controller or Hub (see page 11),
  or to both.

• For voice control with Amazon Alexa, you can set up your device with My Leviton and link your Amazon Account, or you can use Matter to set it up directly in the Amazon Alexa app if you have a compatible Amazon device.

• For voice control with Google Assistant-enabled devices, you can set up your device with My Leviton and link your Google Account, or you can use Matter to set it up directly in the Google Home app if you have a compatible Google device.

• For voice control with Siri, use Matter to set up your device directly in the Apple Home app; this Matter-certified accessory requires an Apple Home hub such as HomePod or Apple TV running the latest software.

• For use with Samsung SmartThings, use Matter to set up your device in the SmartThings app and connect to a compatible SmartThings Hub.

Get the app

To download the app, visit my.leviton.com and select the link or scan the QR code below for your device.

Add your device to My Leviton

1. Make sure the device is in setup mode (status LED should be blinking GREEN). If the status LED is not blinking GREEN, see page 15 for instructions on how to put the device in setup mode.
2. Launch the My Leviton app.
3. Log in or choose “Sign Up” for an Account.
4. Follow the instructions on the screen.
5. Once logged in, tap the “+” in the upper-right corner of the devices page and select “Add Device”.
6. Follow the app instructions to add your device and connect it to your home Wi-Fi network.

Plug in your device

1. 2. Press to turn ON and OFF.

Test My Leviton app control

1. Open the My Leviton app.
2. Tap icon to turn ON/OFF.

Quick tip

• The My Leviton app includes many features such as: scheduling, remote control, vacation mode, auto-shutoff, room scenes, and advanced options for bulb type, fade rates, preset light level, and minimum dim/maximum brightness.
• Additional self-service support options can be found in the My Leviton app or at leviton.com/decorasmart.

Connect to My Leviton partners (optional)
Visit my.leviton.com for a complete list of compatible smart home products and services.

1. Tap the menu icon, select Integrations. Locate the desired service, select it, and follow instructions.

Connect to a Matter Controller (optional)

1. Make sure the device is in setup mode (status LED should be blinking GREEN). If the status LED is not blinking GREEN, see page 15 for instructions on how to put the device in setup mode.
2. Using a mobile device, open the Matter Controller’s app and select “Add Accessory” or “Add Device”.
3. Locate and scan the Matter setup code on the device or on the front page of this Getting Started Guide. If your device has already been enrolled to My Leviton, you can retrieve the Matter setup code at any time under “Device Settings” in the My Leviton app.
4. Follow the instructions in the Matter Controller’s app to complete the setup process and control your Decora Smart device using Matter.

If connecting to more than one Matter Controller

• The Matter setup code on the first page of this manual, on the device, and in the My Leviton app can only be used for setup if the device is not already commissioned to a Matter controller.
• If the status LED briefly blinks AMBER when the device is put into setup mode, the device is already commissioned to a Matter Controller.
• To add the device to additional Matter controllers, use the Matter controller’s app the device is already connected with to generate a new single use Matter pairing code.
• To delete all Matter connections, factory default the device (see page 13). The Matter setup code on the first page of the manual, on the device, and in the My Leviton app can now be used again for commissioning.

Pair an Anywhere Companion (optional)

1. Place the Anywhere Companion in Pairing mode by pressing the top rocker 5 times. Its status LED will blink GREEN.
2. Place the primary Decora Smart Wi-Fi Plug-In into pairing mode by pressing the Control Button 5 times.
   • The status LED will flash GREEN/AMBER.
3. The Decora Smart Wi-Fi Mini Plug-In will automatically pair to the Anywhere Companion in pairing mode in wireless RF range. Once paired, the status LED will quickly flash GREEN to show a successful connection.
4. Learn more about Companion devices and find connection instructions at Leviton.com/anywhere.

What to do if…
Your Mini Plug-In Switch is not performing as expected

• Make sure your plug-in is being supplied from a non-switched 120VAC, 60Hz source ONLY.
• Make sure the lamp or appliance you’re controlling is working (local switch is ON) and check for burned-out bulbs.
• Make sure the lamp or appliance you’re controlling does not exceed the 15A limit.

Not connected to Wi-Fi

• If your device is setup in the My Leviton app, select your device, then select “Device Settings”. On the “Device Settings” screen select “Reconfigure Wireless”.
• Follow the prompts to reconfigure your device and update the Wi-Fi settings.

How do I clean my device?

• To clean, use a damp cloth with mild soap. DO NOT use disinfecting products, including foggers, sprays or other types of atomized cleaning agents.

If you need to reset to factory default

1. Press and hold the button.
2. After the first 7 seconds it will turn AMBER. Continue holding.
3. After 14 seconds, it will quickly flash RED/AMBER. Release button and your plug-in device is reset.
   • Visit leviton.com/decorasmart or contact our technical support team for additional help.

Status LED

network.
GREEN| Slow Blink| Connecting to a Wi-Fi network on power up.
GREEN or

Off

| Solid| Normal operation, can be configured in a setup.
AMBER| Slow Blink| Device is not connected to the Wi-Fi network but attempting to reconnect.
GREEN/ AMBER| Alternating Blink| Device is in wireless Anywhere Companion Pairing Mode.
RED| **** Blink| Wireless Anywhere Companion devices have unpaired or at max number of paired devices.
GREEN/ RED/AMBER| Alternating Blink| Identify feature triggered from the My Leviton app.

Visit My.Leviton.com and select the “Support” option for additional diagnostic assistance.

Diagnostic LED

1. If your device is not connecting to the My Leviton app, the Status LED can be used as a diagnostic tool. Press the button for at least 2 seconds (but no more than 7 seconds) then release. The Status LED will blink a diagnostic code for 2 seconds.

to set the time from the internet.
GREEN| Connected to Wi-Fi and My Leviton cloud is working properly.

Setup mode

1. Hold the button for 7 seconds.
2. After the first 7 seconds the status light will turn AMBER, then release.
3. The Status LED will flash GREEN. The device is now in setup mode.

Safety first
WARNING: TO AVOID FIRE, PERSONAL INJURY OR DEATH DO NOT USE for the control of high power heating appliances such as portable heaters. There can be unexpected consequences if not used with care. For example, an empty coffee pot can be remotely turned on. If that should happen, your coffee pot could be damaged from overheating. If an electric heater is turned on by remote control while clothing is draped over it, a fire could result.
This module will not control lighting that is used with electronic low-voltage and high frequency power supply transformers, nor high pressure discharge lamps (HID lighting). This includes mercury-vapor, sodium vapor and metal halide lamps.

WARNINGS

• This product is to be installed and/or used in accordance with electrical codes and regulations.

• Indoor use only.

• If you are unsure about any part of these instructions, consult an electrician.

• Unplug unit when servicing loads.

• Leviton Wi-Fi enabled devices rely on Wi-Fi communication.
  For customers looking to install a large number of devices it is recommended to consult the wireless network’s access point specifications to determine the maximum number of supported Wi-Fi devices. In some cases, for example large installations, it may be necessary to upgrade to newer high performance wireless grade access points to ensure proper operation.

• Save this instruction sheet. It contains important technical data along with testing and troubles. Troubleshooting information which will be useful after installation is complete.

ADDITIONAL RATINGS

• Purpose of control : Operating Control
• Action Control Type : 1
• Pollution Degree: 2
• I mpulse Voltage: 2500V
• Disconnection Type : Micro

Limited 2 Year Warranty & Exclusions

For Leviton’s limited product warranty, go to www.leviton.com. For a printed copy of the warranty, call 1-800-824-3005.

FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.

FCC COMPLIANCE STATEMENT
The enclosed device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by Leviton could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION
Any changes or modifications not expressly approved by Leviton Manufacturing Co., Inc., could void the user’s authority to operate the equipment.

FCC SUPPLIER’S DECLARATION OF CONFORMITY
Model D215P – Wi-Fi Mini Plug-In Switch is manufactured by Leviton Manufacturing Co., Inc. 201 N. Service Road, Melville, NY 11747.
www.leviton.com This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF EXPOSURE AND CO-LOCATION
To comply with FCC OET Bulletin 65 and ISED RF exposure limits for general population and uncontrolled exposure, this device shall be installed and operated with a minimum distance of 7.9 inches (20 cm) between the radiator and your body. Also, must not be co-located or operated in conjunction with any other antenna or transmitter.

PATENT INFORMATION
Patents covering this product, if any, can be found on Leviton.com/patents.

Copyright and Trademark Information

• Decora and Decora Smart are the registered trademarks of Leviton Manufacturing Co., Inc., registered in the U.S., Canada, Mexico and China.
• Google, Android, Google Play and Google Home are trademarks of Google LLC. Alexa, and related logos are trademarks of Amazon.com, Inc. or its affiliates. Apple®, Apple Home®, and Siri® are trademarks of Apple Inc., registered in the U.S. and other countries. Matter, IFTTT and the Wi-Fi CERTIFIED logo are trademarks of their respective owners and any use of such marks by Leviton is under license.
• Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
• Use herein of other third party trademarks, service marks, trade names, brand names and/or product names are for informational purposes only, are/may be the trademarks of their respective owners; such use is not meant to imply affiliation, sponsorship, or endorsement. No part of this document may be reproduced, transmitted or transcribed without the express written permission of Leviton Manufacturing Co., Inc.
• Copyright 2023 Leviton Mfg. Co., Inc.

If you need help…

• ONLINEdecorasmartsupport.leviton.com
• CHATwww.leviton.com/support
• EMAIL dssupport@leviton.com
• CALL
  • 1-800-824-3005 (USA)
  • 1-800-405-5320 (Canada)

Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747
© 2023 Leviton Manufacturing Co., Inc. All rights reserved. Specifications subject to change at any time without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>