Baseus W15 True Wireless Bluetooth Earphones Instruction Manual

June 14, 2024
Baseus

W15 True Wireless Bluetooth Earphones

Product Information

  • Product Name : W15
  • FCC ID : 2BATA-W15
  • Color : Red

Product Usage Instructions

Warning: This device complies with Part 15 of the FCC Rules. Please ensure that you follow the instructions provided below to avoid any harmful interference or undesired operation.

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It is designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, please try the following measures to correct the interference

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Note: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

The device has been evaluated to meet general RF exposure requirements.

Packing list

Tips

  1. Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts in the earbuds.
  2. Don’t put the earbuds in the water or any others liquid. The earbuds are not waterproof.
  3. If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
  4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electrics hock.
  5. Do not put the product near by the heat source or expose it to the fire source directly.
  6. Do not put the product in the environment with strong electro magnetic force, otherwise it will cause product malfunction.

Earphones specifications

  • Bluetooth version : V5.3
  • Transmission distance : About 10m
  • Music time : About 5 hours
  • Driver size : Ф 13 mm
  • Charging time : 1.5 hours
  • Battery capacity : 30mAh
  • Rated input : 5V=30mA
  • FCC ID : 2BATA-W15

Charging case specifications

  • Battery capacity : 300mAh
  • Charging time : 1.5 hours
  • Battery voltage : 3.7V
  • Rated input : 5V=300mA

(All technical information is subject to actual performance)

Charge the Earphones

  1. When the battery of the earphones is too low, the earphones will broadcast a reminder of low battery every minute until the earphone shuts down (Voice prompt: “Battery low” ), in this case please charge the earphone in time.
  2. When the charging case has sufficient charge, put the earphones back into the charging case; the earphones will enter the charging state, the red light of the earphones will turn on. Then the earphones will be full charged about 1.5 hours later, and the red light of the earphone will turn off.

Charge the Charging Case
Use the included USB-C cable to charge the charging case, which will take about 1.5 hours to complete.

Baseus-W15-True-Wireless-Bluetooth-Earphones- \(3\)

LED Indicator of the charging case

Baseus-W15-True-Wireless-Bluetooth-Earphones- 8

Operation Instructions

  • Power on Method 1: Take both earphones out of the charging case, it will be power on automatically.
  • Method 2 : Long press the left and right earphones touch button for 2 seconds. (V oice prom pt: “Power on”)
  • Note : The earphones will shut down automatically when they are either not connected or not in use for 5 minutes.

Power off

  • Method 1 : Put both earphones back into the charging case, it will enter charging state and shut down automatically after fully charged.
  • Method 2 : Long press either earphone touch button for 5 seconds, then both the left and right earphones will be turned off at the same time. (Voice prompt: “Power off”)

Pairing

  • Step 1 : Take out both earphones from the charging case, the earphones will power on and enter pairing mode automatically.( Voice prompt: “Pairing”)
  • Step 2 : At this time turn on the Bluetooth function of your device and search for “W15”. Then press “pair” , the earphones will connect to your device successfully. (Voice prompt : “Connected”)

Baseus-W15-True-Wireless-Bluetooth-Earphones- \(4\)

Touch operation

General mode

Baseus-W15-True-Wireless-Bluetooth-Earphones- \(5\)

Music

Baseus-W15-True-Wireless-Bluetooth-Earphones- \(6\)

Call mode

Baseus-W15-True-Wireless-Bluetooth-Earphones- \(7\)

LED Indicator of the Earphones

Baseus-W15-True-Wireless-Bluetooth-Earphones- 9

Warning
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals