YI C1RPph89TLL Home Camera Instruction Manual
- June 14, 2024
- YI
Table of Contents
YI C1RPph89TLL Home Camera
What’s in the box
Get to know the Camera
Note: To enable local recording of video clip, please insert a microSD card* (not included) to the slot as shown below.
Pairing Your Camera
Prerequisite
- Ensure that your cell phone is connected to a 2.4 GHz Wi-Fi network.
- Download the YI Home app from the Apple App Store or Google Play.
- Register a YI account or log on to an existing YI account.
Step 1
- Connect the power adapter to an outlet to activate the camera as shown. The camera indicator will flash red and you will hear the introductory message
- “Welcome to YI home”, followed by
- “Waiting to connect”. When you hear “waiting to connect”, tap “I heard waiting to connect”.
Note: To install a camera that was previously installed on a different
network or if you change your password, you must reset your camera. Press the
reset button that is located at the bottom of the camera.
Step2: Log into the YI Home App, you can tap the “+” sign to select your
device or scan the camera’s QR code with your phone.
Step 3: Enter the password of the same Wi-Fi network that is connected to
your phone, then use the YI Home 1080P Camera to scan the QR code that will be
generated.
Step4: Tap “Next Step”. You will hear “Pairing is successful” and then
the YI Home 1080P Camera is ready to use.
Reset Wi-Fi Networks
- When you need to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:
- Restore your camera to its default settings by pressing the reset button.
- Open the YI Home app on your phone, and connect the camera to your phone again. Your videos stored on your microSD card will not be affected.
Important Safety Guidelines
- Read these instructions carefully.
- Clean only with a dry cloth.
- This camera is for indoor use only.
- Only use the attachments/ accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- To get the best usage out of this product, please consistently update to the latest versions of our app and firmware. Wi-Fi: 802. 11 b/g/n, 2.4 Ghz
- Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.
Specifications
- Max imum Resolution: 1920 x 1080
- Lens: Wide-Angle
- Audio: Built-in Mic and Speaker
- Photographic Enhancement: 3D Digital Noise Reduction
- Wi-Fi: 802. 11b/g/n, 2.4 GHz
- Alert Modes: Human Detection, Motion Detection, Sound Detection, Customized Activity Zone Alert
- Night Vision: IR Cut+ Non-invasive Infrared LEDs
- Support Platforms: Android, iOS
- Wireless Encryption: WEP/WPA/WPA2
- USB Cable Length: 2 Meters
- Power Supply: DC 5V/1A
- Power Consumption: 3.5W (max)
- Storage: microSD Card and YI Cloud Storage
- Operating Temperature: 14° F to 122° F ( -10 °C to +50 °C)
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The distance between user and products should be no less than 20cm
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The distance between user and products should be no less than 20cm.
- Hereby we: Yi Technology Co.,Ltd. dedares that the radioe quipment: YYS.2016 is in compliance with Directive 2014/53/EU.
- Product Type: YYS.2016
- Wi-Fi: 2.4GHz ,802.11 b/g/n
- Max RF power: 16dBm
- Manufacturer: Yi Technology Co.,Ltd.
- Address: Building 18, NO.55 Chuanhe Road, Shanghai China
- The full text of the United Kingdom(UK) and Europe Community of conformity is available at the following internet address:
- https://www.yitechnology.com/legal/privacy-policy.
CONTACT
- Manufacturer: Yi Technology Co.,Ltd.
- Address: Building 18, NO 55, Chuanhe Road, Shanghai China Website: www.yitechnology.com.
- https://www.yitechnology.com/legal/privacy-policy.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>