SIGMA Aura 30 Front Light Instruction Manual

June 4, 2024
SIGMA

SIGMA logo. Instruction Manual

SIGMA Aura 30 Front Light - fig

AURA 30
Lux

Aura 30 Front Light


ACCESSORIES

Art.-Nr. 00146

Silikon-Ersatzhalterung
Silicone Bracket

ACCESSORIES

2x AA Alkaline
2x AA Alkaline

INFORMATION

SIGMA-ELEKTRO GmbH hereby declares that the AURA 30 complies with the fundamental requirements and other relevant regulations of Directive 2014/30/EU and  RoHS Directive 2011/65/EU. You can find the CE declaration at: ce.sigmasport.com/aura30

Batteries must not be disposed of with household waste (Battery Law). Please give the batteries to a designated delivery station for disposal.

MOUNTING

Mounting height for front light: min. 400 mm and max. 1200 mm above the roadway. Adjust the front light so that other road users are not dazzled. The headlight must be securely attached to the bike and it must be ensured that the distribution of light is not obstructed. When mounting, make sure that the silicone strap fitting is tightened and mounted during installation so that the headlight can not self-adjust or be easily adjusted (i.e., the torque required for adjustment must be greater than 2 Nm after mounting).SIGMA Aura
30 Front Light - fig3

When mounting, make sure that the screw is tightened so tightly that the headlamp can not self-adjust or be easily adjusted.
Please note: The headlight can not be turned horizontally after mounting the holder; Excessive load to verify assembly may cause mechanical damage to the fixture.

2 MODES

BATTERY CHANGE

BATTERY CONTROL

SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
D-67433 Neustadt / Weinstraße
Tel. +49 6321-9120-118
kundenservice@sigmasport.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals