PARADOX R910 4 Wire Indoor and Outdoor Proximity Reader Instruction Manual
- June 13, 2024
- Paradox
Table of Contents
PARADOX R910 4 Wire Indoor and Outdoor Proximity Reader
Product Information
The R910-EI00 is a 4-Wire Indoor/Outdoor Proximity Reader manufactured by Paradox Security Systems Ltd. It is compatible with the Access Control Module (ACM) Series. The reader operates at a frequency of 125 KHz pulse modulated and supports RS-485 output format. It has a power input range of 11Vdc to 14.5Vdc and consumes a current of 100mA (115mA with card). The reader can be connected to a maximum of one ACM. It is designed to be weather-resistant and can be mounted both indoors and outdoors. The reader features a tricolour LED display (red, green, and amber) that indicates its status. It also includes a built-in beeper with adjustable frequency. The read range may be affected when the reader is mounted on metal surfaces.
Product Usage Instructions
Tricolour LED Display
The R910 reader includes a tricolor LED display (red, green, and amber) that indicates the reader’s status. The intensity of the LED can be adjusted through the connected Access Control Module (ACM).
Technical Specifications
- Power Input: 11Vdc to 14.5Vdc
- Current Consumption: 100mA, with card 115 mA
- Frequency: Exciter field 125 KHz pulse modulated
- Operating Temperature: -35°C (-31°F) to +65°C (149°F)
- Operating Relative Humidity: 5 – 90%
- Output Formats: RS-485
- Cable Distance: 300m (1000 ft.)
- Cables: 4-wire Cables (twisted pair recommended)
- Compatibilities: Access Control Module (ACM) Series
All specifications are subject to change without notice.
wire Connection
- Red
- Black
- Green
- White
Do not connect more than one R910 on a single ACM.
Tricolour LED Display
- The R910 reader includes a Tricolour LED display (red, green, and amber) that is used to indicate the reader’s status. The LED’s intensity is adjusted through the Access Control Module (ACM).
Audible Tone
- The R910 reader includes a built-in beeper with a frequency that is adjusted through the ACM.
Weather Resistant
- Mount indoors or outdoors.
Error Display
- All R910 readers display communication errors between the reader and the ACM by flashing the amber LED every second.
Firmware Upgrade
- Connect the CV4USB as shown in Figure 2. Refer to the CV4USB installation manual for additional information.
Mounting on Metal
- Metal may decrease the read range.
- The R910 card reader can be mounted on metal but do not surround it with metal.
- If the reader must be installed in a metal enclosure, ensure that the face of the card reader is not covered and that there’s at least 4cm (1.6″) between the card reader and the metal on all sides.
Warranty
- For complete warranty information on this product please refer to the Limited Warranty Statement found on the website www.paradox.com/terms. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions.
- © 2023 Paradox Security Systems Ltd. All rights reserved. Specifications may change without prior notice. One or more of the following US patents may apply 7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069, 5077549, and RE39406.
- Digiplex EVO is a trademark or registered trademark of Paradox Security Systems Ltd. or its affiliates in Canada, the United States, and/or other countries. For the latest information on product approvals, such as UL and CE, please visit www.paradox.com.
FCC Statement
FCC and Industry Canada Compliance Statement
This device complies with FCC Rules Part 15 and with Industry Canada license-
exempt RSS standard(s).
Operation is subject to two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may be received or that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. FCC ID: KDYR910 IC: 2438A-R910
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Paradox Security Systems Ltd.) could void the user’s authority to operate the equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>