mucheln BLK-CAVPRI22 Sliding Privacy Door Lock Instructions
- October 27, 2023
- mucheln
Table of Contents
mucheln BLK-CAVPRI22 Sliding Privacy Door Lock
INSTRUCTION
-
Use the template to mark the cutouts in the side of the door.
-
Drill out the cutout and chisel to the correct size
-
Drill and chisel out the lock-body cutout in the end of the door
-
Insert the lock body into the cavity and fix (along with the door plate) with the wood screws.
-
Insert the side of the flush pull with the indicator, into the cutout. Ensure the pin goes through the loop at the back of the lock body
-
Insert the other side of the cavity slider and affix the 2 sides using the 2 screws provided.
-
Determine the correct height for the catch, extend the lock hook, hold the catch against the door jamb, align them and mark on the door jamb
-
Mark and cut the door jamb rebate using the attached template
-
Insert and affix the catch. You can adjust the catch using the screw in the catch. Move it in and out to ensure a close fit between the door and jamb. Then fix the striker plate.
DIMENSION
