TREND HT-S-CC Space Humidity and Temperature Sensor Instruction Manual

: June 15, 2024
: trend

Table of Contents

BAG CONTENTS
STORING
INSTALLATION
CLEANING AND MAINTENANCE
DISPOSAL
Documents / Resources

**TREND HT-S-CC Space Humidity and Temperature Sensor Instruction Manual

**

Important: Retain these instructions

These instructions shall be used by trained service personnel only. If the equipment is used in a manner not specified by these instructions, the protection provided by the equipment may be impaired.

BAG CONTENTS

HT-S, HT-S-CC Installation Instructions (TG200990)

Certification certificate HT-S-CC only

STORING

Storing Instruction

INSTALLATION

Dimensions

It is recommended that the installation should comply with the local electrical safety installation practices (e.g. HSE Memorandum of Guidance on Electricity at Work Regulations 1989, USA National Electric Code).

Mounting Requirements

Remove Backplate

Mount Back plate

Either: Back Box (BESA)
Mount Back plate

Or: Wall Box
Mount Back plate

Or: Wall (surface mount)
Mount Back plate

Remove Cutouts (as required)

Route Cables

Connect to Controller

Refer to controller documentation for connection details
Connect to Controller

Assemble Unit

**Configure Controller

**

IQ Configuration Manual (90-1533)
IQ3 Configuration Manual (TE200768)
IQ4 Configuration Manual (TE201263)

Set up IQ Sensor Types

Use SET to setup the sensor type module to use the appropriate ‘Unique Sensor Reference’.

Temperature
0 to 10 V for 0 to +40 °C (32 to 104 °F)

Humidity
0 to 10 V for 0 to 100 %RH. Measurement range 0 to 95 %RH

CLEANING AND MAINTENANCE

Over time, the sensing element may become covered in dust.
The dust can be removed using compressed air. Under no circumstances should water or cleansing agents be used on the sensing elements.

DISPOSAL

WEEE Directive:
At the end of their useful life the packaging and product should be disposed of by a suitable recycling centre.
Do not dispose of with normal household waste. Do not burn.

Please send any comments about this or any other Trend technical publication to techpubs@trendcontrols.com

© 2023 Honeywell Products and Solutions SARL, Connected Building Division. All rights reserved. Manufactured for and on behalf of the Connected Building Division of Honeywell Products and Solutions SARL, Z.A. La Pièce, 16, 1180 Rolle, Switzerland by its Authorized Representative, Trend Control Systems Limited.

Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any person of such revisions or changes.

Trend Control Systems Limited
St. Mark’s Court, North Street, Horsham, West Sussex, RH12 1BW, UK. Tel: +44 (0)1403 211888, www.trendcontrols.com

HT-S, HT-S-CC Space Humidity and Temperature Sensor Installation Instructions TG200990 Issue 7, 16-Aug-2023.

Symbols
Symbols

TREND Logo

Documents / Resources

| TREND HT-S-CC Space Humidity and Temperature Sensor [pdf] Instruction Manual
HT-S-CC Space Humidity and Temperature Sensor, HT-S-CC, Space Humidity and Temperature Sensor, Humidity and Temperature Sensor, Temperature Sensor, Sensor
---|---