SILVERCREST IAN 373188 Popcorn Maker SPCM 1200 C1 Unboxing Testing User Manual

: June 4, 2024
: SILVERCREST

SILVERCREST IAN 373188 Popcorn Maker SPCM 1200 C1 Unboxing Testing User Manual

SILVERCREST IAN 373188 Popcorn Maker SPCM 1200 C1 Unboxing Testing User
Manual

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

SILVERCREST IAN 373188 Popcorn Maker SPCM 1200 C1 Unboxing Testing -
overview

Information about this short manual

This document is a shortened print version of the complete operating instructions.

Scanning the QR code will take you directly to the Lidl Service page (www .lidl-service.com), where you can view and download the full version of the operating instructions by entering the article number (IAN) 373188_2104.

WARNING!

Observe the information in the complete operating instructions and the safety instructions to avoid personal injury and damage to property.

The short manual is an integral part of this product. Before using the product, please familiarise yourself with all operating and safety instructions. Keep the short manual in a safe place and hand over all documents when passing the product on to any future owner/user.

Proper use

This appliance is intended exclusively for the production of popcorn with dry popcorn corn in private households. Not for commercial use.

Use the appliance only in dry indoor areas: do not use it outdoors.

WARNING

Danger if not used as intended!

The appliance can be hazardous if used for any other purpose and/or in any other manner than the one intended.

Use the appliance only for its intended purpose.
Observe the procedures described in these operating instructions.

Package contents

The appliance is supplied with the following components as standard:

Popcorn maker
Lid
Measuring spoon
Short manual

Unpacking

Remove all parts of the appliance and the operating instructions from the box.
Remove all packaging materials and any stickers from the appliance.

NOTE

Check the package for completeness and signs of visible damage.
If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the service hotline (see section Service ).

Appliance description

Measuring spoon
Lid
Motor unit
On/Off switch
Ejection opening
Popcorn chamber

Safety instructions

WARNING! RISK OF ELECTRIC SHOCK!

Before using the appliance, check whether the mains voltage corresponds to the voltage given on the type/rating plate.
Route the power cable in such a way that it cannot become trapped or damaged in any other way.
Use the appliance only in dry indoor areas, not outdoors.
Never immerse the appliance, the mains cable or the plug in water or any other liquid! This could lead to a potentially fatal electric shock!
Always disconnect the plug from the mains power socket after use, before cleaning or before moving the appliance.
Do not operate the appliance if it has been dropped or is damaged in any way. Have the appliance checked and/or repaired by qualified technicians if necessary.
To avoid potential risks, damaged mains cables should be replaced by the manufacturer, their customer service department or a similarly qualified person.
Never open the appliance housing. This can lead to risks and also invalidates the warranty.
Do not expose the appliance to rain, and never use it in a humid or wet environment.
Ensure that the connecting cable never becomes wet or moist during operation.

WARNING! RISK OF INJURY!

Never use the appliance for purposes other than those described in these instructions. There is a risk of injury if the appliance is misused.
This appliance may be used by children aged 8 years or above and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are supervised, or have been instructed in the safe use of the appliance and have understood the potential risks.
Cleaning and user maintenance must not be carried out by children, unless they are aged 8 or over and supervised.
Children younger than 8 years of age must be kept away from the appliance and the power cable.
Do not allow children to play with the appliance.
Provide a stable location for the appliance.
Route the mains cable in such a way that no one can tread on it or trip over it.
Install the appliance as close as possible to an electrical power socket. Ensure that the power plug is quickly reachable in case of danger, and also that there is no danger of tripping over the cable.
Hot steam is released during the cooking process, especially when the lid is opened. Keep a safe distance away from the steam.
Caution! Hot surface!
Parts of the appliance get hot during use. Risk of burns!

WARNING! RISK OF INJURY!

Allow the appliance to cool down before cleaning it or changing the accessories.
The freshly cooked popcorn is hot! Always place a sufficiently large bowl under the ejection opening and allow the popcorn to cool sufficiently before eating.
Never leave the appliance unattended while it is being used.
Do not use the appliance near hot surfaces or flammable materials.
Never set up the appliance close to or underneath flammable objects, especially not under curtains or suspended cupboards.

CAUTION! PROPERTY DAMAGE!

Do not use an external timer switch or a separate remote control system to operate the appliance.
Do not insert anything into the ventilation slits in the appliance housing and do not cover them.
Do not allow any liquids to get into the ventilation slits in the appliance housing.
Never leave the appliance unattended while it is being used.
Allow the appliance to cool for 15–20 minutes after every use before using it again.
Do not put any ingredients such as sugar, salt, oil, butter, etc. into the popcorn chamber, as these can damage the appliance. Add such ingredients to the finished popcorn after preparation and outside of the appliance.
Never operate the appliance without corn grains in the popcorn chamber.

CAUTION! PROPERTY DAMAGE!

Use only the accessories recommended by the manufacturer.
Do not use aggressive, chemical or abrasive cleaning agents! They could irreparably damage the surface.

NOTE

No user action is required to switch the product between 50 and 60 Hz. The product adapts automatically to either 50 or 60 Hz.

Setting up

WARNING! RISK OF INJURY!

► Never set up the appliance close to or underneath flammable objects, especially not under curtains or suspended cupboards.

Clean the appliance before first use as described in the section Cleaning.
Set up the appliance on a level, heat-resistant and non-slip surface.
Make sure the On/Off switch 4 is set to “O”.
Plug in the appliance.
The appliance is now ready for use.

Use

Making popcorn

WARNING! RISK OF INJURY!

Parts of the instrument, especially the lid 2 and the measuring spoon 1 , become very hot during operation. Risk of burns!

CAUTION! PROPERTY DAMAGE!

Do not put any ingredients, such as sugar, salt, oil, butter, etc., into the popcorn chamber 6 , as these can damage the appliance. Add such ingredients to the finished popcorn after preparation and outside of the appliance.
Never operate the appliance without corn grains in the popcorn chamber 6.
Allow the appliance to cool for 15–20 minutes after every use before using it again.

NOTE

► Not all corn is suitable for popcorn production. Only use popcorn corn supplied for this purpose.

If necessary, remove the lid 2 together with the measuring spoon 1 from the appliance.
Add a maximum of 60 g (= 1 measuring spoon 1 filled to the brim) of corn grains into the popcorn chamber 6.
Put the lid 2 on. Make sure that the curvature on the lid 2 lies over the notch on the rim of the appliance.
Place the measuring spoon 1 into the upper opening in the lid 2. The two tabs on the measuring spoon 1 must lie in the narrow notches in the lid 2 :

SILVERCREST IAN 373188 Popcorn Maker SPCM 1200 C1 Unboxing Testing -
measuring spoon

NOTE

► To melt butter with the appliance, follow the instructions in the section Sweetening/salting popcorn.

Place a heat-resistant bowl under the ejection opening 5.
Make sure that the bowl is sufficiently high and wide to collect all of the finished popcorn.
Set the On/Off switch 4 to “I”. The appliance starts producing popcorn.
After a short time, the finished popcorn is blown out of the appliance through the ejection opening 5.
Once all the corn has been processed, set the On/Off switch 4 to “O”.
Allow the appliance to cool for 15–20 minutes before using it again or cleaning.

Sweetening/salting popcorn

CAUTION! PROPERTY DAMAGE!

Do not put any ingredients such as sugar, salt, oil, butter, etc. into the popcorn chamber 6 , as these can damage the appliance. Add such ingredients to the finished popcorn after preparation and outside of the appliance.
Make sure that no butter runs into popcorn chamber 6 at any time!

You can use the appliance to melt butter and then add it to the finished popcorn.
This works best with room-temperature butter.
The butter ensures that the sugar or salt adheres to the popcorn.

Add a maximum of 20 g room temperature butter to measuring spoon 1 before switching on the appliance. The butter melts during the popcorn production.

NOTE

► If the butter has not melted completely, remove the measuring spoon 1 from the lid 2 and stir the butter carefully.

Pour the melted butter over the finished popcorn in the bowl and mix.
Add salt or sugar to taste and mix the popcorn again.

Overheating protection

The appliance is fitted with an overheating protector! If the appliance overheats, it switches off automatically. As soon as it has cooled down sufficiently, it switches itself on again automatically.

To prevent the appliance from restarting unintentionally, switch the appliance off if it overheats. Allow the appliance to cool for 15–20 minutes before using it again.

Cleaning

WARNING! RISK OF ELECTRIC SHOCK

Always remove the plug from the mains power socket before cleaning the appliance.
Never immerse the appliance, the mains cable or the plug in water or any other liquid! This could lead to a potentially fatal electric shock!

WARNING! RISK OF INJURY!

Allow the appliance to cool fully before cleaning it.

CAUTION! PROPERTY DAMAGE!

♦ Do not use aggressive, chemical or abrasive cleaning agents! They could irreparably damage the surface.

Wipe out the popcorn chamber with a dry cloth. If necessary, slightly moisten the cloth.
Clean the motor unit 3 with a moist cloth. If necessary, apply a mild washing-up liquid to the cloth. Afterwards, wipe off with a cloth moistened only with water to ensure that no detergent remains on the appliance.
Clean the lid 2 and the measuring spoon 1 in warm water with a mild detergent. Rinse off all parts afterwards with plenty of fresh water.

NOTE

The lid 2 and the measuring spoon 1 are both dishwasher-safe.
Place the parts in the upper basket only and ensure that none of the parts can get stuck. Otherwise, they could become deformed!

Dry all parts thoroughly before reusing or storing them.

Storage

Clean the appliance as described in the section Cleaning.
Store the cooled-down appliance in a clean, dust-free and dry location.

Troubleshooting

SILVERCREST IAN 373188 Popcorn Maker SPCM 1200 C1 Unboxing Testing -
Troubleshooting

If the malfunction cannot be corrected using one of the suggestions above, or if you have found some other kind of malfunction, please contact our Customer Service department.

Disposal

Disposal of the appliance

Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive 2012/19/EU.

Dispose of the appliance via an approved disposal company or your municipal waste facility. Please comply with all applicable regulations. Please contact your waste disposal facility if you are in any doubt.

Your local community or municipal authorities can provide information on how to dispose of the worn-out product.

The product is recyclable, subject to extended producer responsibility and is collected separately.

Disposal of packaging

Returning the packaging to the material cycle conserves raw materials and reduces the amount of waste that is generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.

Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings: 1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composites.