PARKSIDE Multi-Purpose Table Set User Guide
- June 4, 2024
- PARKSIDE
Table of Contents
PARKSIDE Multi-Purpose Table Set
Introduction
This quick reference guide is a fixed part of the operating instructions. Keep both this and the operating instructions in a safe place. When passing this product on to third parties, please be sure to include all documentation. Read the operating instructions before use, and pay particular attention to the safety instructions included in the operating instructions.
Scan the QR code, or download the complete operating instructions at www .lidl-service.com
Intended use
The multi-function table set has three table elements to use individually or together. It further has four different table heights. The multi-function Tables are multifunctional, e.g. for wallpapering, parties, etc. They are easy to transport and fold for space-saving storage. This product is only intended for private household use, not for commercial purposes.
Parts description
After unpacking, verify the parts are complete and check the condition of the product.
- Spring bolt
- Strut
- Tabletop
- Carrying handle
- Table leg
- Metal plate
- Plastic end caps
- Connection bracket
- Nut
- Locking clip
- Locking plug
Technical data
Set-up dimensions
- per section: approx. 100 x 60 cm
- Table heights: 73 cm; 80 cm; 87 cm; 94 cm adjustment
- Load capacity per table: max. 35 kg
Safety notices
Warning
-
* RISK OF FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN! Never leave children unsupervised with the packaging material. Suffocation hazard. - DANGER TO LIFE! During installation keep children away from the area in which you are working.
- Make sure that the product is only assembled by competent persons.
- Be sure to place the product on a solid surface at floor level.
CAUTION: Do not leave children unattended! The product is not a climbing frame or toy! Do not allow persons, particularly children, to climb onto or lean against the product. Otherwise, the load on the product may become unbalanced and cause it to tip over. This may result in injury and/or damage.
- Store the product in a dry location, out of the reach of children.
- Do not lift or move the product when weighed down in any way.
- The load on the product must not exceed 35 kg. Failure to observe this advice may result in injury and / or product damage.
- Only use the product in areas protected from rain.
- Do not use the product as a work platform.
- Only fold the tables at the lowest height setting.
- Verify the spring bolts are firmly in place before every use.
- Dispose of defective, no longer usable tables according to local regulations.
Installation (Fig. A‒F)
- First, unfold the table legs 5 in pairs (see Fig. A).
- Select the desired table height and lock in place with the spring bolts 1 (see Fig. B).
- Pull the hinges upwards until flat (see Fig. C). Slide the locking clips 10 over the hinges to ensure they are stable.
Connecting the tables together
An Arow of tables can be connected with the below method
- Remove the plastic end caps 7 at the connection side for the first table.
- On the second table, remove the plastic end caps 7 insert the metal plate 6 into the slot and tighten with the nut 9. And then insert the other side of the metal plate 6 into the first table.
- Secure the connection by pressing the plastic locking plug 11 into the hole.
- Repeat the above process if you want to connect more tables.
Remark
- Tables in different angle combinations can also be connected. The connection brackets 8 can be clipped under two tables (see Fig. E).
- There are many possibilities to combine the tables (see Fig. F). Please note it may be not possible to use the connection brackets 8 in some cases.
Cleaning and care
To remove more stubborn dirt, use a damp cloth and, if necessary, a mild cleaning agent.
OWIM GmbH & Co. KG
- Address: Stiftsbergstraße 1 74167 Neckarsulm GERMANY
- Model no: HG04967
- Version: 06 / 2021
Last Information Update: 12 / 2020
Ident-No: HG04967122020-8