PRETTYCARE H1 Cordless Handheld Vacuum Instruction Manual
- June 14, 2024
- PRETTYCARE
Table of Contents
PRETTYCARE H1 Cordless Handheld Vacuum
Product Information
Specifications:
- Accessories : Charger
- Display : Screen display
- Voltage Range : Total voltage
- Power Display : 0-100 (increments of 5%)
- Filtration System : HEPA (High-Efficiency Particulate Air)
Product Usage Instructions
Checking Accessories:
If any accessories are damaged or missing, please contact us for a free
replacement.
Screen Display Operation:
The screen display shows the power level of the product based on the total
voltage. The SOC algorithm is used to increase the power display in increments
of 5%, ranging from 0 to 100.
Recharging:
To recharge the product, follow these steps:
- Connect the charger to the product.
- Plug the charger into a power source.
- Allow the product to recharge fully before use.
FAQ (Frequently Asked Questions)
What is HEPA?
HEPA stands for High Efficiency Particulate Air. It is a filtration system
that can effectively remove airborne particles, such as dust, pollen, and pet
dander.
How does the power display work?
The power display on the screen shows the power level of the product. It is
based on the total voltage and uses a SOC algorithm to increase the power
display in increments of 5%, ranging from 0 to 100.
How do I recharge the product?
To recharge the product, simply connect the charger to the product and plug it
into a power source. Allow the product to recharge fully before use.
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN
THIS MANUAL AND ON THE APPLIANCE
When using an electrical appliance, basic precautions should always be followed, including the following:
WARNING: These warnings apply to the appliance, and also where applicable, to all tools, accessories, chargers or mains adaptors.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
- Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance.
- Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
- Children aged from 8 years and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge can use this appliance, only if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance. Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance.
- Do not use the appliance for anything other than its intended use.
- This appliance should not be operated using an external timer or separate remote control system.
- This appliance is intended for domestic use only. It should not be used for commercial purposes.
- Carrying the appliance with your finger on the switch or energizing the appliance that has the switch on invites accidents.
- Do not touch the nozzle when the vacuum cleaner is on. Danger.
- Do not put any objects into openings. Do not use with any openings blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
- Do not use it outdoors or on wet surfaces.
- Do not operate the vacuum cleaner or charger if it has been damaged in any way. If the vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, contact the PRETTYCARE Customer Service.
- To avoid excessive heat and damage to the unit or battery, the vacuum cleaner will not operate while charging.
- Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only the manufacturer’s recommended attachments.
- Do not pull or carry the charger by a cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners.
- Do not run the appliance over the cord. Keep the cord away from heated surfaces.
- This charger is not intended for use by travelers.
- Do not use extension cords or outlets with inadequate current carrying capacity for the charger.
- Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
- Do not handle chargers or vacuum cleaners with wet hands.
- Use appliances only with specifically designated battery packs.
- Use of any other battery packs may create a risk of injury and fire.
- Do not mutilate or incinerate batteries. They become dangerous at high temperatures.
- This vacuum cleaner creates suction. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without filters in place.
- Use extra care when cleaning stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Store vacuum cleaner and charger indoors in a cool, dry area.
- To avoid electric shock and/or cleaner damage, do not be exposed to weather elements.
- Keep your work area well-lit. Unplug electrical appliances before vacuuming them.
- Overcharging, short-circuiting, reverse charging, mutilating, or incinerating the cells and the batteries must be avoided. If a cell or a battery has leaked or vented, it should be replaced immediately using protective gloves. If and when necessary, these cells or batteries must be replaced with identical new ones from the same manufacturer. If a cell or a battery to be replaced is connected with other cells or batteries in series, it is recommended that the other cells or batteries be replaced with new ones at the same time.
- Reverse polarity installation of the cell or the battery in the end product must be avoided.
- Do not incinerate this appliance even if it is severely damaged.
- Contact local waste facility before discarding in trash.
Parameter
- Item: Rechargeable Vacuum Cleaner
- Input: 100-240V
- Output: 13.5VDC, 400mA
- Model No.: H1
- Power: 120W
- Battery Capacity: 2000mAh
Product Parts List
- Mainframe
- Charging base
- Crevice tool
- Anti_static brush head
- Dusting brush
- Hepa
- Charger A
If any accessories are damaged or missing, please contact us for free replacement.
Overview
Assembling
- Attach different accessories for different tasks as illustrated.
- Install the vacuum cleaner in the right direction to avoid airflow issues or not working.
Using
Before use, make sure that
- the power supply is sufficient.
- the dust collector and filters are cleaned, dried, and fixed in place.
- Press the power button.
- Press the suction strength button to switch the suction level.
- Choose the anti-static brush head to clean lint from fabric sofa
- Choose the dusting brush head to clean the curtains, crevices, corners, and debris
- Insert the crevice nozzle to clean according to your needs.
Screen display operation
Bad on the total voltage, increase the SOC algorithm, the power display is
0-100 every 5% (0, 5, 10, 15… 100).
Introduction to the User Interface Icons
- Off mode : The digital screen is completely dark and no icons are displayed.
- Power on mode : In the normal working state of the vacuum cleaner, the display shows the current power level
Screen display operation
Based on the total voltage, increase the SOC algorithm, the power display is
0-100 every 5% ‡ (0, 5, 10, 15…100).
- When the vacuum cleaner is in use and the power is below 10%, the display flashes at 1Hz
- Charging status: The charging display shows real-time power and flashes at 1 Hz. After fully charged, the screen will automatically sleep
Cleaning & Maintaining
Unload the dustbox
- Peel off the security sticker
- Hold the vacuum cleaner in your hand and rotate the dust bowl anti-clockwise “ ” to meet, ” “to unlock
- Just remove the dust bowl downwards
- Please make sure the dust collector is aligned.
- Do not tilt the filter while it is in operation.
Dust Cup Cleaning
- Press the dust collector release button to empty.
- Hold the vacuum cleaner in your dust bowl anti- clockwise “ ” to meet, ” ” to unlock, remove the dust bowl
- Clean the dust cup by using a damp cloth with a mild detergent.
- Air dry before placing it back in the vacuum cleaner.
- Never operate a vacuum without all filters.
- Wash the filter with cold water at least every month.
HEPA Cleaning
- Hold the vacuum cleaner, rotate it to the direction of ” ” to unlock it, and remove the metal filter
- After the disassembly of the remove HEPA*
- Indeed, clean with water and a mild detergent
- Air dry the cotton filter and metal filter until completely dry before placing them back in the vacuum cleaner.
- After cleaning, place the filter in the mainframe, holding the direction done, and rotate to the installation
- Place the dust bowl into the mainframe, rotate the dust bowl, and let” ” and ” “align to complete the installation
HEPA : High-Efficiency Particulate Air
Charging base with suction pad
- Choose a flat table or floor for the charging base and press down to make the bottom suction pad to suck on the flat surface to stabilize
- Once the base is stable and installed, the vacuum cleaner and accessories can be inserted
Charging
- Whole Machine Charging.
- Recharge with the charger.
Troubleshooting
If it still doesn’t work with the following solutions, please contact us.
Failure Phenomena
| ****
Analysis of causes
| ****
Solutions
---|---|---
The vacuum cleaner is not working
| Low battery level| Use when fully charged
Excessive use and high-temperature| Leave to cool, then turn it on again and
use
The power switch is not turned on| Turn the switch on button correctly
Motor blocking protection| Clean the suction port
Damaged motor/ damaged battery| Please contact the after-sales service
Excess i ve no i se
| The dust bowl is full| Clean the dustbowl
The suction port is blocked by a foreign object| Clean the suction port
Reduced suction power
| Clogged cartridge / not sufficiently dried| Clean the cartridge / dry it
well
A foreign object stuck in the suction port| Clean the suction port
The dust bowl is full| Clean the dustbowl
Unable to recharge
| Poor connection of the adapter to the AC power supply| Ensure the adapter
plug is firmly connected to the power supply
Bad connection between the adapter and the mainframe| Ensure the adapter plug
is correctly connected to the mainframe
Adapter mismatch| Please use the original adapter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>