Mrosaa Smart Wi-Fi Pet Feeder with 1080P HD Live Camera User Manual
- June 5, 2024
- Mrosaa
Table of Contents
Pet Auto Feeder
Product Manual
Please read this manual carefully before use to ensure safe use of the smart
pet feeder
Feeder (subject to the actual product)
List of accessories (subject to the ach. Jal product)
Product Introduction
Battery use Instructions: When the external power falls, the device will
automatically enable
the Installed battery to power the device. (Note: the device cannot charge the
battery)
Operation Guide
1, The first use
(1)0pen the lop cover of the feeder and remove the power cord adapter from the
bucket.
(2)Plug the power cord into the power connector on the rear of the main unit
and connect the adapter to power.
(3)Place the main unit in a horizontal position and the food bowl is installed
at the corresponding position of the main unit.
(4)Add pet dry food to the feeder bucket
(5)The desiccant is placed in the desiccant box by default. Please replace it
regularly for long-term use (do not use cleaning)
(6)The battery compartment can be installed with 3seclions of No. 1 battery
for manual feeding when there is no el electricity (optional).
(7)Bind the feeder to the Smart Life app to set up the feeding and planning of
the pet.
2. The function description
Feed button: Short press to eat one, long press for 5 seconds to restore the
factory
settings.
Record button: Press and hold the “Record button” to record the sound lo
remind
the pet to eat before feeding.
Play Button: Plays the recorded sound.
Rocker switch: Feeder switch.
Dry Battery compartment: Three 1st batteries can be Installed for power
supply.
3. The Near App
App installation
Scan the QR code below to download the Near app and complete the installation
Open the Near App
Click “Create a new account”.
Select the time zone to enter the account and click to get the verification
code.
– Enter the received verification code for verification.
– Set up login password and login successfully
Quick Configuration
Pair with Video Version Pet Feeder Configuration
4, Video Feeder APP Interface Introduction
Setting
(1) Share device: share the device with others
(2)Remove device: remove device and unbind
Monitoring Screen Introduction
- setting : set other functions
- Signal: Signal quality
- Horn: Real-time monitoring
- SDIHO: switch image quality
- Full screen
(1)Screenshot: take a picture from the video
(2)Atak: 2way voice intercom
(3)Record: take record and save into the mobile phone
(4)Photo album: store photos
(5)Play: SD card video playback
(6)Timed feeding: delivery food at regular intervals
(7)Feeding: click to feed
(8)Alarm: motion detection alarm on/oft
(9)Cloud playback: Cloud storage video playback
5, WiFi Feeder APP Interface Introduction
Setting
(1 )Share device: share the device with others
(2) Remove device: remove device end unbind
Online Feeding Introduction
- More setting: setup other feeder function
- Automatic feeding: Choose automatic feeding
- Feeding information: click to check feeding information
- Manual feeding: manual feeding online
- Adding timing: set up timing feeding rules
Cleaning/maintenance
After the feeder has been used for a period of time, the bowl and the bucket should be cleaned with a cleaning agent to avoid the occurrence of bacteria that affect the health of the pet due to the long time left by the food residue.
- The upper showed machine parts can be removed from the main feeder and cleaned with detergent and water.
- The drying box in the upper cover is rotated counter clockwise to remove it.
- The grain drum is dismantled by rotating the •grain barrel separation switch·.
- The bowl is taken out by pulling down .
- After cleaning, it must be dried or air-dried before being assembled
into a whole main feeder for use.
▲ This feeder is suitable for dry foods smaller than 12 m m. Freeze dried
food is not available. Please keep the environment dry.
Attentions
-
Please place the device correctly; prevent the pet from tipping over the device. This
device is only suitable for small and medium pets under20kg. -
Please replace the desiccant in the storage lid regularly. No desiccant is needed.
-
Please keep the food bucket dry and sealed, end check regularly to ensure food
residue Precautions -
Do not drop all substances other than pet dry food into the grain bin. Otherwise, the
device may be used abnormally or even cause pet safely problems. -
To prevent the pet from falling over the product, it is recommended to place the
corner or against the wall -
The product anti battering line should be Installed as concealed as possible to
prevent the equipment from being damaged by the pet biting the wire. -
If children are using this device, be sure to use it under adult guidance.
-
After installing the spare dry battery, you can manually operate the device to
provide normal power supply during power failure. -
Regularly clean the food bucket and food bowl.
-
This device is not recommended for young pets within three months.
FAQ
Q. The feeder is not connected, what i s the problem, what to do .
A.
1:Check if the machine is normal: Check. !he status of the device indicator.
After the power is turned on, the blue indicator light flashes. When the
network is connected, it will be on. There will be a drop tone before the
network is configured.
2. Check if the Wi-Fi username and password are normal: Wi-Fi username and
password cannot have special characters. It is recommended to use English
letters+ number signs.
3. Uninstall the software and reinstall the software: Please authorize the
APP lo obtain the location Information and access the network permissions
during the installation process. Follow the above steps, and enter the correct
wifi password. If you still have difficulties, please contact customer
service.
Q. When connecting the feeder, sometimes it can be connected normally,
sometimes not, how to deal with it.
1. Check if the machine’s food outlet is blocked At this lime, the blue
indicator is elways on. Q_ Why does the feeding time differ by tens of seconds
from the current time
A. The parameters set on the APP will have an error of about 30 seconds
depending
on the timing of the network environment.
Q. How lo quickly reconnect after the machine is disconnected.
1 : Exit the A.PP and re-enter, wait for the data update
2 : Switches from the feeding interface to the video interface end waits for
the vide
o to refresh.
Q. About SD card support capacity.
A. Support 8-64G
Q. Feeder requirements for network type
A. The feeder must use a wifi signal that satisfies the wifi 802, 11bgn
protocol.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>