Kruger Matz KM0773 Microphone Boom Arm Owner’s Manual
- June 13, 2024
- Kruger Matz
Table of Contents
Kruger Matz KM0773 Microphone Boom Arm
Mounting
Product Information
- Product Name: Microphone boom arm
- Model Number: KM0773
- Languages: RO, PL, HU, EN, DE, CS
- Manufacturer: Lechpol Electronics LeszekSp.k.
- Address: ul. Garwoliska 1, 08-400 Mitne, Polsko
- Trademark: Krugermatz (registered trademark)
SAFETY INSTRUCTIONS
Read the entire instruction manual before you start installation and assembly and keep it for future reference.
CAUTION: Never exceed the maximum load capacity! Using products heavier than the rated weights indicated may cause damage/injury.
- Mounts must be attached as specified in this manual. Improper installation may result in damage or serious personal injury. The producer does not claim liability for any damages/ injuries caused by inappropriate installation. Use only for the purpose intended.
- Do not alter the structure of the product. Any modifications implemented by the user in the product pose a risk of injury or damage and void warranty!
- Safety gear and proper tools must be used. This product should be installed by a qualified professional with proper mechanical skills and acknowledged with the building’s structure and this instruction manual.
- When installing the device on the bracket, it is recommended to use the help of a second person.
- Make sure that the supporting surface will safely support the combined weight of the mount, equipment, and all attached hardware and components.
- Use the mounting screws provided. DO NOT OVER-TIGHTEN mounting screws, as this may lead to damaging the screw thread.
- Before installation, make sure the device, that will be installed on the bracket, is suitable for hanging on a mount.
- All cables of the device should be routed so that they are secured from being pinched or squeezed by the mount.
- This product contains small items that could be a choking hazard if swallowed – keep away from children, this product is not a toy.
- For indoor use only.
- Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your distributor for a replacement.
MAINTENANCE
After installation, make sure the bracket is firmly mounted. At regular intervals, at least every three months, check that the bracket is secure and safe to use.
ADJUSTING THE TENSION
- Pull the arm out of the mount.
- There is a screw at the bottom of the tube. Use a screwdriver to loosen or tighten it depending on the weight of your microphone
The tension of the boom arm has been set to about 50% and the load is 1 kg. Tighten it maximally and you will gain a maximum load of 1,5 kg (for heavy microphones)
Correct Disposal of This Product
- (Waste Electrical & Electronic Equipment)
- (Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>