ESORUN Fold M52 5000mAh Magnetic Wireless Power Stand User Manual

ESORUN Fold M52 5000mAh Magnetic Wireless Power Stand

Product Information

The device described in this user manual complies with part 15 of the FCC Rules. It has been evaluated to meet general RF exposure requirements. The manufacturer has not approved any changes or modifications to the device, as doing so may void your authority to operate the equipment.

Product Usage Instructions

1. Caution: Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer.
2. Ensure that the device is operated in a manner that does not cause harmful interference to other devices.
3. This device is designed to accept any interference it receives, including interference that may cause undesired operation. Be aware of this and adjust usage accordingly.
4. Follow the general RF exposure requirements when operating the device to ensure compliance.
   Please consult the complete user manual for detailed instructions on how to operate and use the device safely and effectively.

Model: Fold M52
S000mAh Magnetic Wireless Power Stand for iPhone 14 / 13 / 12 and subsequent series, Airpods 3

What’s Included

Specifications

Product Structure

1. Wireless Charging Area
2. Switch
3. PowerRate lndicator
4. Wireless Charging Status Indicator
5. Foldable Stand
6. Type-C Input/Output

LED Usage

Power Rate Indicator

Stand

The stable stand of this power can be folded to flat for travelling. Not only a stand, but also a power bank. When you don’t need to charge, it can be a Mag Safe stand to support your phone (horizontally or vertically). Just need to press the switch twice to turn off.

How To Use

Use of Switch

Single Press: Turn on
Double Press: Turn Off
Press the switch once to power on and the battery indicator will light up. Then It’s in standby mode and other devices will be charged.
Press the switch twice continuously, it will be power off. And then lt wlll be a magnetic phone stand.

Wireless Charging Operation

Please fit the product with the back of your iPhone {12, 13, 14 series or Airpods 3) or other wireless charging phone (which with Magsafe-compitable ring attached then it will charge your phone automatically via the built-in magnetic wireless charging. Max to be 1 SW, and IPhone series is 7.SW due to I Phone’s restrict.

Note:

1. The magnetic wireless power bank Is mainly used for 1Phone 12, iPhone 13, 1Phone 14 series, or phones with Magsafe-comp1table ring attached (Please note some of Magsafe-compat1ble rings from the 3rd might not work) And It can also used with A1rpods 3.
2. Please press the switch to turn on the power bank before charging your device.

Charging The Power Bank

Please recharge the product when the power or battery is low.

1. Using the included cable (like USB-A to Type-C cable or CTO C), connect the USBA or C connector into QC/PD adapter and the Type-( connector to the input connector of the power bank.
2. During charging,Green LED indicators will flash to show charging status.
3. When charging is complete the Green LED indicators will stays on.

Pass Through Charging
You can put (Stick to)your iPhone 12/13/14series, Airpods 3 on the wireless charging area and connect this power bank to the power source (PD or QC Adapter). It will charge the power bank itself and your iPhone1 2/13/14/Airpods 3 at the same time.

Note:
Wh1le chargmg, the phone will be m fast charging and power bank1s In a slow charging When phone 1sfully charged, the power bank1s m fast charging mode

Power Bank Operation

1. Insert the charging cable Type C end into Output.
2. Plug the other end of the cable into a terminal such as phone.
3. Using the USB-A to Type-C or C-C cable {Not included), connect the C cable into the power bank and the other side to the devices you want to charge, such as iPad, phone, earphone, Switch and soon.

Note:
When the power bank only charge one device, whether C port or wireless charging area, the output support fast charging; 1f two device, the maximum output power Is SV/1 A, no fast charging.

Warning

• Do not drop, misuse or apply excessive force to your power bank. Power banks contain batteries and a circuit board with fragile components that can be damaged if misused.
• If your power bank swells or bulges, stop use immediately and dispose of the power bank in an appropriate manner.
• Store power bank in a cool and dry place. Do not store in hot or humid environments.
• All power banks have safety power cut off features to stop overcharging & overheating.
• When charging a device the power bank may feel warm, this is a normal operating condition & should not be cause for concern.
• It’s normal that this charger and your smart phone will be hot under operating conditions and it may be more hotter when charging and using at the same time (such as playing music).
• In normal conditions, battery performance will decline overseveral years.

Remarks
When your wireless power bank works improperly

1. Make sure there Is no any clutters on the wireless power bank, such as magnet, metal, credit card and other foreign obJect.
2. When the wireless power bank Is over-heating take your mobile device away from your wireless power bank and the power bank will stop charging automatically when over-heatmg. Please try charging again when the wireless power bank cooling dawn

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>