ESPERIA KRH-M505 Car Radio Owner’s Manual

KRH-M505
Owner’s manual
12/24V DAB/DAB+/Bluetooth®/
USB/MP3/WMA/FM/MW Stereo Radio

Thank you for purchasing this product.
Please read this instruction manual to the end before use so that you can fully utilize the functions of this machine and use it effectively.
After reading it, please keep it in a safe place. It is always useful if you have any questions or problems during use.
Also, if you operate the machine while driving, you may be careless in front of you and cause an accident. Therefore, be sure to stop the car in a safe place before operating the machine.

About the waterproof performance of this machine

1. This machine is not waterproof. The front panel is drip-proof, but do not splash water directly on it.
   Surroundings and inside Water may get into the part and cause a fire, electric shock, or malfunction.

2. Make sure that the rubber cap is completely closed before use.

3. Do not give a shock to this machine. Damage may cause deterioration of waterproof performance.

Operational Panel

1. Power [ ] Button
   Press the button to power ON. Press again to power OFF.

2. LCD (Liquid Crystal Display)
   The receiving band and frequency or the current time will be indicated on the display.

3. Clock [CLOCK CLOCK ADJ. ] Button
   While receiving the radio, press the button to change the display to a clock, and press it again to display the frequency.
   If you press and hold (2 seconds or more), “ADJ” will be displayed on the display, “Clock” will blink and the clock adjustment mode will be set.
   In DAB mode, pressing this button will switch the LCD display.
   PTY-> Frequency-> Clock-> LIST

4. Scan [SCAN] Button
   In radio mode, press the button to start searching for stations and preset receivable stations.
   Buttons ① to ⑥ can be automatically memorized.

5. Tuning [ , ] Buttons
   Press the [ ] button to increase the reception frequency by one step, and press the [ ] button to decrease the reception frequency by one step. (Manual channel selection)
   Press the [ ] button for 2 seconds or longer, the frequency will automatically change to the higher side, and press the [ button for 2 seconds or longer, the frequency will automatically change to the lower side, searches for a broadcasting station, and stops when it can be received.
   If you want to stop in the middle press again. (Seek channel selection)

6. Preset Memory [①～⑥] Buttons (Bluetooth control, USB button combined)
   One FM and one MW station can be preset memory for each button.
   ※For Bluetooth mode and USB mode operations, “Play audio of Bluetooth device” and “USB Operations” please see.

7. Program type [PTY] (DAB/DAB+ ) Button
   ※Broadcast target area Select the type of station you are listening to Pop, classical, news, and more.

8. Volume Control [VOL＋,－] Buttons
   Press the [ VOL+ ] button to increase the sound volume, press the [ VOL– ] button to decrease the sound volume. Press and hold to change the sound volume continuously.

9. Bluetooth [ ] Button
   Press the button to connect to the last Bluetooth compatible device that has registered (Pairing).
   Press the button until you hear a beep, connection (registration) is released and the pairing standby mode is set.

10. Bluetooth LED
    When this LED lights up, the Bluetooth device is connected. Flashes in pairing standby mode.

11. Mic-IN jack（ Mic In Put）
    When using, open the rubber cap and connect a commercially available microphone (φ3.5mm).
    ※Be sure to close the rubber cap when not in use.

12.  Mode Select [MODE] Button
    FM → MW → DAB → BT→ USB
    Press the button to switch the operation modes as shown.
    In Bluetooth mode and USB mode, the display switches from frequency to clock.

13. USB Input Terminal ( ) ※Type A
    When using, open the rubber cap and connect it to the USB memory using a commercially available USB extension cable. If you cannot use the extension cable, use a short type USB memory.
    ※Be sure to close the rubber cap when not in use.

Listening to the DAB/DAB+

DAB is one of the digital radio broadcasting systems currently available.
It can provide digital-quality sound without annoying interference or signal distortion. In addition, it can carry text and data.

1. Turn the ignition key to ACC or ON, and press the [ ] button to turn on the Radio.
2. With the [MODE] button, select DAB.
3. Press the [SCAN] button to automatically scan and memorize the stations that can be displayed.
4. Use the [① ～ ⑥] or [ ] or [ ] buttons to select the desired station.
5. To turn off the radio, press the [ ] button.

DAB/DAB+ Frequency Manual tuning

1.  Press the [CLOCK, clock ADJ] button to switch the LCD display.
   PTY-> Frequency-> Clock-> List No,

2. Select the desired broadcasting station by pressing the [ ] or [ ] button.

DAB/DAB+ PTY Manual tuning

Select the desired program type (PTY) from the station types that can be selected by pressing the [PTY] button, and then press the [ ] or [ ] button to select from pop, classic, news, and so on.

Listening to the radio

1. Set the ignition key to ACC or ON and press the [ ] button to turn on the radio.
2. Select the desired band FM or MW by the [MODE] button.
3. Use the preset memory button or tuning button to select a channel and adjust the volume.
4. To turn off the radio, press the [ ] button.

Receiving FM stereo broadcasting

When you receive an FM stereo broadcast, “ST” will appear on the display. When the reception condition deteriorates, it automatically switches to monaural with less noise and the “ST” display disappears.

Radio Manual tuning

Select the channel manually. Press the [ ] button to increase the reception frequency by one step, and press the [ ] button to decrease the reception frequency by one step.

Radio SEEK tuning

Press the [ ] button for 2 seconds or longer, the frequency will automatically change to the higher side, and press the [ ] button for 2 seconds or longer, the frequency will automatically change to the lower side, searches for a broadcasting station, and stops when it can be received. If you want to stop in the middle press again.

Memorizing radio station to the memory

1. Press the [MODE] button to select FM or MW and select the desired station.
2. Then search the desired station by the seek or the manual tuning.
3. Press any button (from ① to ⑥) for 3 seconds or longer.

※If you press the button that has been preset memory for 3 seconds or longer, the preset frequency will be overwritten with the current frequency.
※You can preset memory for each FM and MW station for each button.

Auto Store Memory

During the radio mode, by pressing and releasing the [SCAN] button will automatically store a strong signal station in a memory from the channel ① to the channel ⑥.
CAUTION:

• Auto store memory overwrites previously-stored stations.
• If the desired button does not memorize, please preset it manually.

USB Operations

Connect a USB storage device to USB socket on this unit.
Press the [MODE] button and select the USB mode.
(“USB”will be displayed on the display, it becomes a clock display.)
When playing back a USB memory, you can perform the following operations with the preset memory buttons ① to ⑤.

1. Previous Track [ ] Button
   Skip to the previous track. Press and hold this button to rewind fast-rewind.

2. Play/Pause [ ] Button
   Pause or resume playback.

3. Stop [ ] Button
   If you press the button during playback, playback will stop. When you press the play/pause [ ] button, the beginning of the song that was playing. Playback starts from.

4. Next Track [ ] Button
   Skip to the next track. Press and hold this button to rewind fast-forward.

5. Repeat [ ] Button
   Repeat the current track. Press the repeat button again, turn off the repeat mode.

CAUTION:

• We do not guarantee a connection with all USB memory.
• USB memory playback model is audio compression method MP3 (MPEG-1 Audio Layer3 (～192kbps)), WMA (Windows Media Audio) , play the saved file.
• Insert and remove the USB memory in a mode other than USB mode.
• When connecting to a USB memory, use a commercially available USB extension cable. If the extension cable cannot be used Please use a short type USB memory.
• Do not connect any device other than USB memory. Smartphones cannot be charged.
• Even if the data on the USB memory is lost or damaged when used in combination with this unit, we are not responsible for the compensation. Please note that we cannot take™ responsibility.

Using Bluetooth wireless technology

Mobile phones and audio devices that support Bluetooth can be connected to use with this unit. You will be notified that there is an incoming call by connecting the mobile phone.
※If the microphone is not installed, this unit cannot handle calls.
In order to use Bluetooth devices must be able to match certain profiles. this unit is compatible with the following profiles.
HFP(Hands-Free Profile),A2DP(Advanced Audio Distribution Profile), AVRCP(Audio/Video Remote Control Profile)
※ The Bluetooth word mark and logos are owned by the Bluetooth SIG, inc. and any use of such marks by ESPERIA Co.,Ltd Is under licensed.

Pairing Bluetooth device

When connecting Bluetooth devices for the first time, mutual registration is required.
Pairing enables this unit and other devices to recognize each other.
※Please first enable the Bluetooth function of the Bluetooth device before pairing.
For details, please refer to the manual of the Bluetooth device.

1.  Press the [MODE] button to select the function Bluetooth mode.

2. Enable Bluetooth on the Bluetooth device.
   ※See the instruction manual of the compatible device.

3. Select “CAR RADIO2” with a Bluetooth device.

4. The Bluetooth LED or “PAIR” light up, and the pairing is complete.

5. IF you can’t pair, press the [ ] button until you hear a beep. Please cancel the pairing once and pair again.

CAUTION:

• Only one pair of Bluetooth devices can be paired with this unit.
• When you turn on the power, there is a function to reconnect to the last connected de- vice. When leaving this machine (car etc.) to prevent incorrect connection, press the [ ] button until you hear a beep, cancel the pairing.
• To pair again, repeat steps (1) to (5) above.
• Use Bluetooth-compatible devices in a place with good visibility within about10m.

Play audio of Bluetooth device

If the Bluetooth device is already connected (the Bluetooth LED is lit or “PAIR” is displayed), press the [MODE] button to switch to the BT mode. In BT mode Bluetooth device can be operated with ①、 ②、④ buttons.

1. Previous Track [ ] Button
   Return to the beginning of the current track.
   Press the button again to skip to the previous track.

2. Play/Pause [ ] Button
   Pause or resume playback.

3. Next Track [ ] Button
   Skip to the next track.

CAUTION :

• Depending on the mobile phone model, you may not be able to go back, play, or forward.
• In case no sound is detected from this unit, please see to it that the Bluetooth compatible device music output destination is in “CAR RADIO2” please check.

Bluetooth device How to call

If the Bluetooth device is already connected (the Bluetooth LED is lit or “PAIR” is displayed), the unit is in standby mode for incoming calls.
When you receive a call, the LCD display will show “CALL IN”, the car stereo volume will be automatically muted, and the speaker will ring the phone.

1. [ ] You can answer the incoming call by pressing the call start button.
2. [ ] Press the button to end the call.

CAUTION:

• We do not guarantee connection with all mobile phone models.
• This unit does not have a built-in microphone for calling. A commercially available mimicrophone (φ3.5mm ) is required.
• Depending on the mobile phone model, you may not be able to operate, make any sound, or make a call when receiving a call.
• After connecting to a mobile phone, if the mobile phone is set to “Bluetooth compatible device priority”, you cannot make a call.
• We recommend that you test the call you cannot make a call once before using it.

Specifications

General

Power Source ：
Power Consumption:
Rated Output:
Power Normal Output Power： Dimension ：| DC12～24V negative ground
2.5A(at volume MAX, at 28.8V)
16W + 16W(4Ω)
14W + 14W（10％TDH，4Ω)
179(W)×50(H)×99(D)mm
DAB section
Receiving Frequency Range：| BANDⅢ(174.928～239.200MHz)
FM section
Receiving Frequency Range：
Usable Sensitivity :
S/N Ratio ：| 87.5～108.0MHz(EU)
87.9～107.9MHz(USA)
87.5～108.0MHz(ASIA)
12dBμ(S/N 30dB)
50dB
MW section
MW section:
Receiving Frequency RangeUsable: Sensitivity:
S/N Ratio:| 531～1602kHz(EU)
530～1700kHz(USA)
522～1629kHz(ASIA)
32dBμ(S/N 20dB)
40dB

Bluetooth section

Specification:
Output power:
(Line of sight communication  distance about 10m)
Frequency Range：
Support Profile:| Ver.5.0
Class2
2.402～2.48GHz
HFP V1.7,A2DP V1.3,AVRCP V1.6
3.14dBm(for EU)
USB section
Specifications ：
Folder structure ：
Support File ：
Support Format ：
MP3：
WMA：
Support File System ：
Maximum Output ：| USB1.0/2.0 (TypeA)
8 levels
65,545 Files
MPEG1 Audio Layer3
Windows Media™ Audio
FAT32/FAT16 File system
DC5V / 0.5A
Mic-IN jack section
Specification:
Output voltage:| φ3.5mm
DC5V

Select a service currently broadcasting.

Radio

Problem

| Cause|

Measure

---|---|---
Sound  is noisy| It is not on the frequency of the broadcasting station.| Please adjust to the correct frequency.
The antenna does not extend.
(when using pillar antenna)| When using a radio, please use
the pillar antenna extends.
The antenna is not grounded or not installed properly.| Please consult your dealer.
The antenna power supply is not connected.| The booster built-in antenna needs to connect the power supply to the antenna. For details, please consult your dealer.

USB Playback

MP3/WMA files properly to the USB storage device.
The files are not in proper MP3/WMA format.| Use only properly encoded MP3/WMA files.
Sound is Interrupted or has noise.| The MP3/WMA files are improperly encoded.| Use only properly encoded MP3/WMA files.
The device is not recog­nized.| The device is damaged.| Try replacing it with a different device.
Connectors are loose.| Disconnect the USB storage device and reconnect.
The USB memory is not formatted with FAT32 / FAT16.| Format the USB storage device with the FAT32 / FAT16 file system and write the MP3 / WMA file. Be sure to back up the USB memory before formatting.

Bluetooth

Depending on your Bluetooth device, some items that take time to connect may not be automatically reconnected.
Please check the Bluetooth LED.  If it does Not turn on the light on time, please pair Again according to “Pairing  Bluetooth devices”.
Another Bluetooth device is connected.| If another Bluetooth device is connected, pair it again according to “Pairing Bluetooth devices”.
Can not remotely control
Bluetooth devices.| AVRCP profile is not connected.

| Please disconnect all connected Bluetooth devices and pair it again according to “Pairing  Bluetooth devices”.
The connection link between
Devices may be broken.| Again according to “Pairing  Bluetooth devices”.
Does not support AVRCP| Please check the support profile of the Bluetooth device.
No sound was heard.| Bluetooth device volume is low.| The volume of the Bluetooth device will be affected.
Please set the volume of the Bluetooth device to an appropriate value.
The output destination of the Bluetooth device is not set to “CAR RADIO2”.| Please confirm that the Bluetooth device music output destination is in “CAR RADIO2”.
Bluetooth audio playback stops after the incoming call.| Audio may not resume after a phone is interrupted.| After the call ends, please again according to “Pairing Bluetooth devices”.

Setting the Clock

1. Press the [CLOCK CLOCK ADJ.] button for 2 seconds or longer to enter the clock adjustment mode. (The clock display flashes.)
2.  Press the [ ] button to adjust the hour. Pressing the [ ] button to adjust the minute.
3. The clock display will return by pressing the [CLOCK CLOCK ADJ.] button again.

Declaration of conformity
We use this model KRH-M505
In accordance with the provisions of the 2014/53/EU and 2011/65 EU directives, we have established basic requirements and other relevant rules.

FCC 15B ClassB

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

SAR test

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply with without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from the person’s body (excluding extremities: hands, wrists, feet, and ankles).

Co.,ltd.
2-8-85,YOSHINODAI,KAWAGOE-CITY SAITAMA-PREF.,JAPAN
TEL:+81-49-226-9120 FAX:+81-49-226-9136

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>