Arlux LIGHTING K-LINE Interconnectable LED Strip Instruction Manual
- June 13, 2024
- Arlux LIGHTING
Table of Contents
Arlux LIGHTING K-LINE Interconnectable LED Strip
Product Information
- Brand: K-LINE
- Model Numbers: 3297028505700, 3297028505724, 3297028505748, 3297028505915, 3297028505939
- Wattage: 21W, 40W, 55W, 36W, 60W
- Luminous Flux: >80 lumens
- IP Rating: IP65 (dust-tight and protected against water jets)
- Voltage: 230V
- Dimensions:
- Model 3297028505700: 60cm (length) x 7.6cm (width) x 6.6cm (height)
- Model 3297028505724: 118cm (length) x 7.2cm (width) x 6.1cm (height)
- Model 3297028505748: 148cm (length) x 7.2cm (width) x 6.1cm (height)
- Model 3297028505915: 119.2cm (length) x 6.5cm (width) x 6.5cm (height)
- Model 3297028505939: 149.2cm (length) x 6.5cm (width) x 6.5cm (height)
Product Usage Instructions
- Ensure the power supply is switched off before installation.
- Choose an appropriate location for mounting the K-LINE product.
- Securely fix the K-LINE product using the provided mounting brackets or screws.
- Connect the K-LINE product to a 230V power source.
- Switch on the power supply.
- The K-LINE product is now ready for use.
Instructions for use
Electrical products must not be thrown out with domestic waste. They must be
taken to a communal collecting point for environmentally friendly disposal in
accordance with local egulations. Contact your local authorities or stockists
for advice on recycling.
Product conforms to European Union Directives
For indoor use only
For outdoor use only
Live: brown wire
Neutral: blue wire
Class I, double insulated, earthless
Not compatible with a dimmer
Light source (LED only) not replaceable
Non-replaceable power supply
18W: ref.999104
36W: ref.999105
This product contains a light source of energy class D.
48W: ref 999106
This product contains a light source of energy class E.
General safety instructions
- The installation of the product must be carried out by an electrician or any other shock. qualified person and in accordance with the standards in force in the country.
- Before use, make sure that the product has not been damaged. If deterioration installation
- To proceed with the installation or any maintenance or upkeep, turn is noted, do not use the product. off the electrical network.
- If the cable or flexible outer cord of this luminaire is damaged.
- Do not look directly at the light source. replaced by a special cable or cord exclusively from the manufacturer, or its
- Never touch the product when it is in use, or when it has just been turned off. maintenance department.
- Do not use a damaged or modified power cord to avoid any risk of fire, electric
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>