VOLTCRAFT 2884219 USBC-60 USB Charger with USB C Power Instruction Manual

VOLTCRAFT 2884219 USBC-60 USB Charger with USB C Power Instruction Manual

Intended use

The product is a USB charger. Use the product to charge devices that support charging or operation via USB-C®.

The product supports USB Power Delivery (USB PD) via the USB-C® cable:

• max. 20 V/DC, max. 60 W

The product is equipped with overload and short-circuit protections.

The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances.

If you use the product for purposes other than those described, the product may be damaged.

Improper use can result in short circuits, fires, electric shocks or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved

USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum

Delivery contents

• Charger
• Mains cable
• Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

• The symbol warns of hazards that can lead to personal injury.
• The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
• Protection class 2 (double or reinforced insulation, protective insulation).
• This product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
• This symbol indicates that the product meets the energy efficiency requirements for Class VI.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Mains cable
Do not modify or repair mains supply components including mains plugs, mains cables, and power supplies. Do not use damaged components. Risk of death by electric shock!

• The mains outlet must be located near to the device and be easily accessible.
• Never plug in or unplug the mains plug when your hands are wet.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device for an extended period of time.
• Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mechanical stress.
• Avoid excessive thermal stress on the mains cable from extreme heat or cold.
• Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged mains cable can cause a deadly electric shock.
• Do not touch the mains cable if it is damaged.
  • First, power down the respective mains socket (e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains socket.
  • Never use the product if the mains cable is damaged.
• A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned by the manufacturer or a similarly qualified person, so as to prevent any danger.
• Ensure that cables are not pinched, kinked or damaged by sharp edges.
• Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.

Operation

• Do not short-circuit the USB ports/connectors.
• Do not connect USB devices that have voltage and current requirements that the product cannot satisfy.
• The product gets hot during use. Ensure sufficient ventilation and never cover the product during use.
• Always turn off the USB devices before connecting and disconnecting them from the product.
• Disconnect the product from the power supply if not in use.
• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stresses.

Connected devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

Operation

Important:
The total load of all connected USB devices must not exceed the total power the charger can supply (refer to section Technical data).

Preconditions

The voltage and current requirements of the USB device are suitable for the charger (refer to Technical data).

1. Switch off the USB device.

2. Connect the USB-C® cable of the charger to the USB device.

3. Connect the mains cable to the power socket on the charger.

4. Connect the mains plug to a suitable mains socket.
   The USB device starts charging.

5. (If charged) switch the USB device off, then disconnect it from the charger.

6. After use, disconnect the mains cable from the mains socket.

Cleaning

Important

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.
  1. Disconnect the product from the power supply.
  2. Let the product cool down to ambient temperature.
  3. Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.

Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany

Technical data

Data according to EU regulation 2019/1782

A, max. 15.0 W 9.0 V/DC, max. 3.0 A, max. 27.0 W 12.0 V/DC, max. 3.0 A, max. 36.0 W 15.0 V/DC, max. 3.0 A, max. 45.0 W 20.0 V/DC, max. 3.0 A, max. 60.0 W
Average active efficiency| 82.4 %
Efficiency at low load (10 %)| 79.6 %
No-load power consumption| 0.09 W

Others

Total power………………………………. max. 60 W
Protection class ……………………….. Class II
Operating temperature ……………… 0 to +35 °C
Operating humidity …………………… 10 – 90 % RH
Storage temperature …………………. -10 to +55 °C
Storage humidity ………………………. 5 – 95 % RH
USB cable length………………………. 1.15 m
Mains cable length ……………………. 1.5 m
Dimensions (L x W x H) …………….. 123 x 56 x 23 mm
Weight …………………………………….. 211 g (without mains cable)

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.

Copyright by Conrad Electronic SE.
*2884219_V1_0723_jh_mh_en 9007200191448459-2 I2/O1 en

References

• Conrad Electronic » All parts of success
• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>