Q-TRAN QZ-ND LED Power Supply Instruction Manual
- June 13, 2024
- Q-TRAN
Table of Contents
Q-TRAN QZ-ND LED Power Supply
Product Information
The LED Power Supply – QZ-ND is a versatile power supply for LED lighting fixtures. It is available in different wattages, including 30W, 60W, 96W, 192W, and 288W. The power supply comes with a driver compartment and a wiring compartment. The mounting tabs and holes on the bottom of the enclosure allow for easy installation. The QZ-ND can be mounted vertically or horizontally, depending on your preference.
Specifications
- Wattage: 30W, 60W, 96W, 192W, 288W
- Mounting: Vertical or Horizontal
- Driver Compartment Dimensions (QZ 30W): 6.5″ x 2.33″ x 1.42″
- Wiring Compartment Dimensions (QZ 30W ): 5.78″ x 3.75″ x 1.58″
- Driver Compartment Dimensions (QZ 60W): 7.50″ x 2.33″ x 1.42″
- Wiring Compartment Dimensions (QZ 60W): 6.78″ x 3.75″ x 1.58″
- Driver Compartment Dimensions (QZ 96W): 8.59″ x 2.2″ x 1.42″
- Wiring Compartment Dimensions (QZ 96W): 7.87″ x 3.75″ x 1.58″
- Driver Compartment Dimensions (QZ 192W): 10.94″ x 2.91″ x 1.41″
- Wiring Compartment Dimensions (QZ 192W): 9.94″ x 4.33″ x 1.77″
- Driver Compartment Dimensions (QZ 288W): 11.87″ x 2.91″ x 1.41″
- Wiring Compartment Dimensions (QZ 288W): 10.87″ x 4.33″ x 1.77″
Installation Instructions
- Mounting: The QZ-ND can be mounted either vertically or horizontally. Use the supplied screws and the mounting tabs on the bottom of the enclosure for installation.
- Stud Mounting: The QZ must be mounted into a stud for sufficient support. Use either the center holes or the slots of each mounting tab for mounting.
- Multiple Power Supplies: When installing multiple QZ power supplies, separate the enclosures by at least 3 inches of space from edge to edge. This prevents the rise of ambient temperature between the power supplies.
INSTALLATION
Required Hardware/Mounting Foot
Mounting
The QZ-Non Dim can be mounted either vertically or horizontally, utilizing the supplied screws and the mounting tabs on the bottom of the enclosure.
The QZ must be mounted into a stud for sufficient support, using either the center holes or the slots of each mounting tab
When installing multiple QZ power supplies, seperate the enclosures by 3” of space from edge to edge. This prevents the rise of ambient temperature between the power supplies.
Wiring diagram
Wiring from the power supply to the light fixture must be two conductor cable
QZ 30W
QZ 60W
QZ 96W
QZ 192W
QZ 288W
© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-08-09-23
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>