HAVIS C-UMM-103 Universal Vehicle Mount For Monitor Installation Guide
- June 13, 2024
- HAVIS
Table of Contents
HAVIS C-UMM-103 Universal Vehicle Mount For Monitor
Product Information
The C-UMM-103 is a universal monitor mount designed for mounting computers or monitors. It comes with a handle and various hardware components for installation.
- Handle: The C-UMM-103 includes a lever handle for easy adjustment.
- Mounting Options: There are two principal ways to mount the C-UMM-103. For single point mounting, you can use the hardware supplied with the C-LDM0012 through the center hole. Alternatively, you can mount it using three screws with a 1/4 hole pattern required on 1 centers.
- VESA Hole Pattern: If you want to mount a computer or monitor with a VESA hole pattern, simply align it with the holes on the C-UMM-103 and attach it using the hardware provided with the computer or monitor mount.
- VESA Hole Pattern Adapter: In case the computer or monitor does not have a VESA hole pattern, you will need to use an adapter (see C-MM-200 selection). Attach the adapter to the computer or monitor, and then attach the adapter to the C-UMM-103 using the provided 1/4-20 serrated nuts.
- Rubber Bumpers: Self-adhesive rubber bumpers (RM25062) are provided to prevent damage to other equipment when operating the C-UMM-103. They can be used if desired.
Product Usage Instructions
- If you intend to use the handle, replace the nylock nut on the desired joint with the supplied lever handle.
- For single point mounting, use the hardware supplied with the C-LDM0012 through the center hole. If you want to mount using three screws, ensure you have a 1/4 hole pattern on 1 centers. If not available, drill holes as required and attach the hardware using the provided diagram as a guide.
- To mount a computer or monitor with a VESA hole pattern, align it with the holes on the C-UMM-103 and attach it using the hardware provided with the computer or monitor mount.
- If your computer or monitor does not have a VESA hole pattern, you will need an adapter. Attach the adapter to the computer or monitor, and then attach the adapter to the C-UMM-103 using the provided 4x 1/4-20 serrated nuts.
- If desired, use the self-adhesive rubber bumpers (RM25062) to prevent damage to other equipment when operating the C-UMM-103.
For any further assistance or inquiries, please contact Havis at 1-800-524-9900 or visit www.havis.com.
- Weight: 3.492 lbs
- Revision Date: 11-21
- Product Drawing No.: 10-011797
- Product Description: Assembly, C-UMM-103, Base, Universal Monitor Mount
INSTALLATION INSTRUCTIONS
-
C-UMM-103 HAS A HANDLE SUPPLED IN THE HARDWARE KIT. IF THE HANDLE IS TO BE USED REPLACE THE NYLOCK NUT WITH THE SUPPLIED HANDLE ON THE DESIRED JOINT.
-
THERE ARE TWO PRINCIPAL WAYS TO MOUNT THE CUMM-103. FOR SINGLE POINT MOUNTING (SUCH AS CLDM-0012 OR DIRECT TO CONSOLE):
-
USE THE HARDWARE SUPPLIED WITH THE C-LDM0012 THROUGH THE CENTER HOLE.
-
TO MOUNT USING THE THREE SCREWS A 1/4″ HOLE PATTERN IS REQUIRED ON 1″ CENTERS. THE MAJORITY OF HAVIS PRODUCTS HAVE THIS HOLE PATTERN. IF IT IS NOT AVAILABLE DRILL HOLES AS REQUIRED. THEN ATTACH THE HARDWARE USING THE DIAGRAM TO THE RIGHT AS A GUIDE.
-
TO MOUNT A COMPUTER OR MONITOR WITH A VESA HOLE PATTERN TO THE C-UMM-103, LINE IT UP WITH THE HOLES AND ATTACH USING THE HARDWARE PROVIDED WITH THE COMPUTER OR MONITOR MOUNT.
-
IF THE COMPUTER OR MONITOR DOES NOT HAVE A VESA HOLE PATTERN AN ADAPTER WILL BE REQUIRED (SEE C-MM-200 SELECTION). ATTACH THE ADAPTER TO
THE COMPUTER OR MONITOR THEN THE ADAPTER TO THE C-UMM-103 WITH THE 4X 1/4-20 SERRATED NUTS PROVIDED. -
SELF ADHESIVE RUBBER BUMPERS RM25062 ARE PROVIDED TO PREVENT DAMAGE TO OTHER EQUIPMENT WHEN OPERATING THE C-UMM-103. USE IF DESIRED.
WARNING:
ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER, MOUNT IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE OPERATING VEHICLE.
DRAWING NO. 10-011797
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>