Adexa EP4T Electric Pizza Oven User Manual

Adexa EP4T Electric Pizza Oven

User Manuals
Thanks for using our company’s product. To ensure optimal product performance and avoid unnecessary loss or damage, please read this manual carefully. It provides installation and operation instructions as well as information about the product’s characteristics.

Please keep this manual for future reference.

Control Board Operation Instruction

1. The left switch controls the internal lighting.
2. The two thermostats separately control the top and bottom heating elements, each with its own indicator light.
3. The right switch controls all the heating elements. When turned on, the thermostats can be used. The indicator lights turn off when the heating elements reach the set temperature. (Note: If the power switch is on, the timer will be out of function. If you need to use the timing function, please first turn off the power switch. The timer will act as a power switch in this case.)

Functions

1. Heating up quickly: The oven is equipped with a 350 thermostat, which greatly saves cooking time.
2. Equipped with a baking stone for more even heating of food.
3. Two thermostats separately control the top and bottom heating elements, allowing you to adjust the temperature of each element freely.

Application

1. Applicable for baking all fresh and frozen bread and flour products.
2. Applicable for baking fresh and frozen meat.

Installation Instruction

1. All electrical power units and circuit connections must be installed by a qualified electrician following safety standards.
2. Connections must be made according to the requirements.
3. Ensure that the rubber feet are securely installed.
4. Place the product in a well-ventilated area on a solid platform.

Operation Instruction

• N/A

Warning

1. Always pull out the plug before cleaning, repairing, or moving the machine.
2. Do not touch the switch or plug with wet hands.
3. Do not flush the machine directly with water. Avoid letting water flow into the switch during cleaning.
4. Keep the machine out of reach of children.
5. Ensure that the ground wire is connected and that all connections are reinstated after maintenance.

Maintenance

1. Always pull out the plug before performing maintenance. Clean the chamber after it has cooled down.
2. For daily cleaning, use a dry cloth to wipe off grease from the chamber. Do not flush the chamber with water directly. To clean the baking stone, remove it from the oven, use a fur brush to clean its surface, rinse it with water, and then dry it. Do not use any cleanser on the baking stone as it may affect the flavor of the food due to its strong water-absorbing properties.

Thanks for your using of our company product, in order to ensure the product performance gives full play to the role, please have a read of this manual to avoid unnecessary loss and damage, and get a further study of our product characteristic, installation and operation. Also please keep the manual for further reference.

Safety instruction

Warning:

1. Please confirm the power supply is suitable for the machine’s use. Also please confirm if the power socket matches the power wire parameter.
2. Please use the oven within the limits of the temperature according to the data plate. Also, the ground lead must be connected.
3. Don’t place any fire goods near the oven, and don’t do washing and painting beside the oven.
4. Please prevent other things from dropping inside the oven, which may cause a short circuit problem by touching the resistance wire.
5. The power must be put off before opening the oven door, also operator can’t leave the oven alone when it heating up.
6. Never clean the oven while it working, and never use gasoline to clean it.
7. Don’t use the damaged power wire, if there are any damaged spare parts, please replace them before using them in case of electric leakage.
8. Before cleaning or maintaining the oven, please turn off the power first.
9. Sharing the ground wire with other machines is forbidden.
10. The oven should be installed and maintained by a professional electrician.

Control board operation instruction

1. The left switch is for controlling the internal lighting
2. These two thermostats separately control the top and bottom heating elements and their indicator lights.
3. The right switch is for controlling all the heating elements, turn it on, and then the thermostats can be used. The indicator lights turn off when the heating elements reach the set temperature. (If the power switch is “On”, the timer would be out of function. If you need to use the timing function, please first turn off the power switch, by now, the timer also acts as a “power switch”.)

Functions

1. Functions
2. Heating up quickly. This oven is equipped with a 350℃ thermostat, greatly saving cooking time.
3. Equipped with a baking stone, which makes the food is heated more evenly.
4. Two thermostats separately control the top and bottom heating elements, so you can freely adjust the temperature of each heating element.
5. Application
6. Applicable for baking all the fresh and frozen bread and flour products.
7. Applicable for baking fresh and frozen meat.

Machine illustration diagram

Installation instruction

1. All the electrical power units and circuit connections must be installed by a qualified electrician with safety standards.
2. The connection must be based on requirements.
3. Make sure the rubber feet have been installed securely.
4. The product should be placed in a well-ventilated place on a solid platform, and we suggest to least at least 10cm space between the product and the wall or barriers. Also, place the product away from combustible materials, and there should be a fire extinguisher equipped around.
5. Remove the packaging film from the surface.
6. The power wire should be connected according to safety standards. Make sure the voltage and frequency conform to the parameters. And please install a double pole switch before the connection. When the voltage working, the voltage error should be under ±10%. (Product must be connected to ground.)
7. Connect the cable to the power supply fixed by using a screwdriver according to the connection diagram, then loosen the screw inside the PowerPoint, and plug in the cable, making sure the sheet copper compresses the power line tightly. If the connection is incorrect, it may cause joint heating and burning off the power cord.

Operation instruction

Turn on the power supply.

1. Preheating is necessary before baking food.
2. The temperature of the oven can be adjusted between 0~350℃℃.
3. Turn the timer clockwise to the desired time, then the indicator light is on and the heating element starts working, when it reaches the set temperature, the indicator light is off. If the temperature is below the set temperature, the heating element will be automatically reheated and the indicator light on.
4. The internal lighting can help monitor the baking process.
5. Cooking time depends on the amount of the food, the more the food had, the longer the time required.
6. Please turn off the power if not using it.

Warning

1. If you want to clean、 repair or move the machine, please pull out the plug first.
2. Please don’t touch the switch or plug with a wet hand.
3. The machine can’t be flushed directly, and please be careful not to let any water flow into the switch when cleaning.
4. Keep the children from touching or using the machine.
5. The ground wire must be connected, all the connections must be reinstated after maintenance.

Maintenance

1. Please pull out the plug first before maintenance, and clean it after cooling down the chamber.
2. For daily cleaning, you can use a dry cloth to wipe off the grease on the chamber, don’t flush the chamber with water directly. For cleaning the baking stone, please take out the baking stone, use a fur brush to clean its surface, and rinse it with water then dry it. (Don’t use any cleanser to clean the baking stone, because the baking stone can strongly absorb the water so that the cleanser would be absorbed at the same time, which may affect the flavor of the food.)
3. We suggest maintaining the machine by a qualified electrician once a month.

Troubleshooting

Stoppage

|

Solution

---|---
Not heating up| 1.       Please check whether the connection is loose.

2.       Rotate the thermostat to your desired temperature.

3.       Please check whether the power switch matches up with the parameters

4.       Contact the service center for repair suggestions.

Short circuit| Contact the service center for repair suggestions
Internal light does Not work| 1.       Pull out the plug, and cool down the chamber.

2.       Replace a new bulb.

Scorching smell appear| Contact the service center to check whether the connection is short out.
Baking unevenly| Readjust the thermostats for each heating element to see how they work, If they work well, please contact the service center to check if the Heating element needs to change.

Specification

Model| Temperature range| Dimension(mm)| Internal dimension(mm)| Voltage(V)| Power(KW)
---|---|---|---|---|---
EP4T| 0~500 ℃| 950X395X805| 660X660X180X2PS| 220V| 5

Wiring Diagrams

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>