ESORUN Fold M51 5000mAh Magnetic Wireless Power Stand User Manual
- June 13, 2024
- ESORUN
Table of Contents
Fold M51 5000mAh Magnetic Wireless Power Stand
Product Information
The device is designed to comply with part 15 of the FCC Rules.
It has been evaluated to meet general RF exposure requirement. Any
changes or modifications to this device that are not explicitly
approved by the manufacturer may void your authority to operate
this equipment.
Product Usage Instructions
1. Ensure that the device is placed in a suitable location, away
from any sources of interference such as other electronic devices
or large metal objects.
2. Connect the device to a power source using the provided power
cable.
3. Turn on the device using the power switch located on the
device.
4. Wait for the device to initialize. This may take a few
moments.
5. Once the device is ready, you can begin using it.
6. To operate the device, refer to the specific instructions
provided in the user manual for the desired functions and
features.
7. In case of any interference or undesired operation, ensure
that the device is not placed near any strong sources of
electromagnetic radiation or other devices that may cause
interference.
8. If you need to make any changes or modifications to the
device, seek explicit approval from the manufacturer to avoid
voiding your authority to operate the equipment.
9. When not in use, it is recommended to turn off the device and
disconnect it from the power source to conserve energy and prevent
any potential issues.
10. Refer to the user manual for any additional information or
troubleshooting steps.
Note: These are general usage instructions. Please refer to
the specific user manual provided with your device for detailed
instructions tailored to your product model.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.