Leica EA.A11v1K6 DROP XL Wireless Charger User Manual

June 13, 2024
Leica

Leica LOGO DROP XL WIRELESS CHARGER
USER MANUAL 

WHAT IS INSIDE

Leica EA.A11v1K6 DROP XL Wireless Charger - BOX

SPECIFICATION

Drop XL Wireless Charger
(Model No.: DROPXLO1 )
Power Supply:
Input 100-240V ~ 50/60Hz 1.5A,
Output 15V===3A
Qi Wireless Charger:
Output 10W (max per pad)
Frequency 127.7 kHz
Maximum Field Strength 11.57 dBuA/m
Charging Distance: ≤2 mm
USB-A Port: Output 5V ****2.4A

AirPods Charging:
Make sure the AirPods or AirPods Pro case is placed on the center of the charging area. The white status LED may blink or switch off repeatedly while charging – this does not affect the charging progress. AirPods Pro charging status can be checked by tapping on the case. If the LED lights up orange, charging is still in progress. If the LED lights up green, charging is complete. A full charge takes 3-5 hours.

Leica EA.A11v1K6 DROP XL Wireless Charger - BOX 2

HOW TO INSTALL

Leica EA.A11v1K6 DROP XL Wireless Charger - INSTALLATION
1Leica EA.A11v1K6 DROP XL Wireless
Charger - INDICATION

LED INDICATION
White light
Charging
Red light flashing
Foreign object detected (e.g. metallic object)

Leica EA.A11v1K6 DROP XL Wireless Charger - INDICATION
2

FCC responsible party: TianHeng Consulting, LLC
392 Andover Street, Wilmington, MA 01887, United States
Telephone +1 213-397-2158
Email: support@nativeunion.com
FCC Statement (US Customers only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: X3QDROPXLO1, X3QDROPXLWO1
RSS Statement (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body. IC: 23711- DROPXLO1, 23711-DROPXLWO1

SAFETY INFORMATION

  1. This product is intended for home, office & IT equipment use.
  2. For indoor use only.
  3. Consult local staff before using the product near medical or industrial equipment or on board an aircraft.
  4. Prevent cables from being pinched or damaged.
  5. A damaged cable or device may malfunction and/or overheat. (Fire hazard)
  6. Unplug the product if not used for an extended period of time.

Leica LOGO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals