Babymoov A040008 Baby Walkers Instruction Manual

Table of Contents

WARNING

Never leave the child unattended.
The child will be able to reach further and move rapidly when in the baby walking frame.
Prevent access to stairs, steps and uneven surfaces.
Guard all fires, heating and cooking appliances.
Remove hot liquids, electrical cables and other potential hazards from reach.
Prevent collisions with glass in doors, windows and furniture.
This product is intended only for a child who can sit up by itself and until it is able to walk by itself or weighs more than 12kg.
This baby walking frame should be used only for short periods of time (e.g. 20 min).
Do not use the product if any components are broken or missing.
Do not use accessories or replacement parts other than those approved by the manufacturer.
Electric equipment is subject to a selective collection procedure. Do not throw away electrical and electronic equipment waste with the unsorted municipal refuse, but carry out a selective collection.
Throughout the European Union this symbol indicates this product must not be thrown in the dustbin or mixed with domestic waste but undergo selective collection.

CAUTIONS

Always keep the child in view when using the baby walker.
No part requires lubrication or adjustment. Regular inspection is necessary to make sure of the safety of all the parts and that the manual locking devices are operating correctly.
Do not adjust the baby walker when in use.
This baby walker is designed for installing only one child at a time.
Prevent collisions with the glazed surfaces of doors, windows and furniture.
Regular servicing and maintenance contribute greatly to the preservation of your baby walker.

CAUTION

Non-rechargeable batteries must not be recharged.
Rechargeable batteries must always be removed from the 5 in 1 baby walker case before being recharged.
Do not mix different types of batteries (rechargeable and non-rechargeable) or new and used batteries.
Rechargeable batteries must only be charged under the supervision of an adult.
Batteries must always be inserted with the right polarity.
Used batteries must be removed from the case.
The power supply terminals must not be short-circuited.

Babymoov A040008 Baby Walkers 02

IN 1 BABY WALKER

Assembly of the plate (b)
Insert the push bar (a) in the push bar attachments. Clip the assembly in the plate (b).
Assembly of the cover (e)
Insert the cover (e) in the seat structure (d ) passing the strips through the slots designed for them.
CAUTION : make sure that the cover (e) is correctly installed.
Installation of the seat (d)
Position the front of the seat (d) on the plate (b).
Press on the back of the seat (d) in order to engage it completely.
Assembly of the wheels (g & i) and the brakes (h)
Assemble the wheels (g & i) and the brakes (h). Make sure that each item is well engaged.

Babymoov A040008 Baby Walkers 03

Installation of the play panel (f)
Install the toys in the places designed for them on the play panel (f).

Unscrew the case located under the play panel (f) and insert two LR6 1.5V (AA) batteries (not included). Close the case and screw it into place.
Position the play panel (f) on the plate (b). Pull the tongue located under the plate (b) and turn it to lock the play panel (f).
Unfolding/folding of the baby walker
To unfold the baby walker, raise it till it locks into place.
To fold the baby walker, turn the button located under the plat (b) in the clockwise direction and push upwards. Hold the plate (b) with the other hand and fold it down completely.
Height adjustment (3 positions)
To adjust the height of the seat, turn the button located under the plate (b) in the clockwise direction. Hold the plate (b) with the other hand and adjust it to the required height.
CAUTION : never put your child in the baby walker before it is correctly locked at the required height.
360° rotatable seat
Pull up the button at the back of the seat (d) to release from fixed mode.
To lock the seat: press the button at the back of the seat (d), then turn the seat until it clicks.
CAUTION : the seat must be locked in the non-rotating position before being used as a walker.
Rocker mode
Pull the legs (j) outwards then rotate them downwards 90° and push upwards to lock in position. Remove the rear wheels (i).

WARNUNG

The materials are in compliance with the standards for toys. Nevertheless we advise you not to expose the model too long to direct sunlight. Wear and faded or running colours due to exposure to direct sunlight do not justify any claim. Covers can be washed by hand or in the machine at low temperature (washing product for delicate clothes).
All the parts of the baby walker can be cleaned with mild soap using a wet cloth. Dry the metal parts to prevent them from rusting.
If you observe the above advice, you can make the most of your 5 in 1 baby walker for a long time.
– All the parts of the baby walker can be cleaned with mild soap using a wet cloth. Dry the metal parts to prevent them from rusting.
If you observe the above advice, you can make the most of your 5 in 1 baby walker for a long time.