Rebel COMP KOM1180 Wireless Controller for Smartphones Owner’s Manual
- June 3, 2024
- Rebel
Table of Contents
Rebel COMP KOM1180 Wireless Controller for Smartphones Owner’s Manual
Model: KOM1180
SAFETY INSTRUCTIONS
Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.
- Protect this device from extreme temperatures, sources of heat and direct sunlight. Do not expose the device to water or humidity nor install near strong magnetic field. Do not handle this device with wet hands.
- It is suggested not to consume meals or drink during using the device. Food leftovers getting under the buttons may cause problems with operation or damage the device.
- Do not use this device if it has been damaged.
- Prevent the device from falling on the ground or being strongly impacted.
- Producer does not claim liability for any damage caused by inappropriate use and handling or any mechanical damage.
- Producer does not guarantee compatibility with every external device.
- Do not disassemble nor repair this device yourself. The device has no user serviceable parts inside. In case of damage, contact authorized service point for check-up or repair.
- Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
PRODUCT DESCRIPTION
- D-pad
- L1, L2 buttons
- HOME button / LED indicators
- SELECT button
- START button
- R1, R2 buttons
- Analog sticks
- Function buttons
- Charging socket
- Reset button
OPERATION
Connecting
Wireless
Devices with Android and iOS systems (iOS 13.4 and below)
can connect to the controller wirelessly. Turn on the Bluetooth
on an external device, and make sure that it is in the pairing
mode. Press the HOME button on the controller, and make
sure that it is in proper pairing mode (check the list below). On
an external device go to the Bluetooth pairing menu and
select KOM1180.
- If the LED indicator blinks fast, it is in pairing mode.
- If the LED indicator blinks slowly, the controller is connecting to the last paired device.
- To activate the pairing mode, press and hold the buttons, according to the external device mode.
- After connecting, the LED indicator 3 (for Android) or 4 (iOS) will glow.
Attention! Manufacturer does not guarantee compatibility with all games and external devices.
Wired connection
PCs and PS3 consoles connect to the controller with a cable.
- To connect the controller to a computer, press and hold the R1 button, and while holding, plug the microUSB cable to the controller and the PC. After connecting, press and hold the SELECT and START buttons to switch between Xinput and Dinput modes.
- To connect the controller to a PS3 console, connect the microUSB cable to the controller and to the USB port of the console. The controller is ready to use.
- In the wired connections, the 3 and 4 LED indicators will lit up.
- LED indicator 4 indicates the charging state. During charging it flashes. After charging, the indicator glows solid.
Controller modes
To change the mode of the controller, press and hold the combination for 2
seconds:
- iOS: HOME + Y
- Android: HOME + X
- Direct Play (PC / PS3): HOME + A
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature,
indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul.
Garwolińska 1, 08-400 Miętne.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>