SHIVVERS 273E-001A 10 Inch Jumpster Instruction Manual
- June 9, 2024
- shivvers
Table of Contents
273E-001A 10 Inch Jumpster
Product Information
The product consists of the following components:
- 2 Bin Wall Support Kit (Upper) – Model: 273E-001A
- 1 Upper 10 Jumpster Brace Leg Kit – Model: 715C-001A
- 2 Bin Wall Support Kit (Lower) – Model: 273E-001A
- 10 Lower Jumpster Brace Leg Kit – Model: 715D-001A
The product is designed to provide support for bins and jumper
braces. The bin wall support kit includes two sets of support
brackets that can be used for upper and lower bin installation. The
jumpster brace leg kit includes one set of upper and ten sets of
lower jumper brace legs.
Product Usage Instructions
Follow these steps to use the product:
-
Identify the location where you want to install the bins and
jumper braces. -
Attach the upper and lower bin wall support kits to the wall
using appropriate screws and anchors. -
Attach the upper jumper brace legs to the upper bin wall
support using appropriate screws. -
Attach the lower jumper brace legs to the lower bin wall
support using appropriate screws. -
Place the bins on the support brackets and secure them in place
using appropriate screws. -
Attach the jumpster braces to the jumper brace legs using
appropriate screws.
Note: Make sure to follow the manufacturer’s instructions for
installing and securing the product components. Improper
installation can result in product failure and cause damage or
injury.
EXAMPLE OF 10″ JUMPSTER WITH UPPER, BIPOD SUPPORT KIT & LOWER BIPOD SUPPORT
KIT (ADD-ON KITS) 90° VERTICAL
UPPER 273E-001A 2 BIN WALL SUPPORT KIT & 715C-001A 1 UPPER 10″ JUMPSTER BRACE
LEG KIT
LOWER 273E-001A 2 BIN WALL SUPPRT KIT & 715D-001A 10″ LOWER JUMPSTER BRACE LEG
KIT
UPPER 273E-001A 2 BIN WALL SUPPORT KIT & 715C-001A 1 UPPER 10″ JUMPSTER BRACE
LEG KIT
LOWER 273E-001A 2 BIN WALL SUPPRT KIT & 715D-001A 10″ LOWER JUMPSTER BRACE LEG
KIT
18