HOLLYLAND MARS 300 PRO Wireless HD Video Transmission System User Manual
- June 13, 2024
- HOLLYLAND
Table of Contents
Powered by Helluland
MARS 300 PRO
User Manual
V1.1.0
FOREWORD
Thank you for purchasing Hollyland MARS 300 PRO wireless HD video transmission
system. Please kindly read the user manual before using the product. Hope you
have a pleasant experience.
KEY FEATURES
- Wheel Button on the Side, One-button Rolling Adjustment
- OLED Screen Display on the Side
- 400it Transmission Range between RX and TX (LOS)
- 300t Transmission Range between TX and App (LOS)
- The lowest latency is about 015
- HDMI Input & HDMI Lookout at TX, Dual HDMI Output at RX
- Supports USB Type-G Power Supply
- 1 Transmitter Supports up to 1 Receiver and 2 APPs Monitoring (Or 1 Transmitter Supports up to 3 Apps Monitoring Without RX)
- Supports Smart Channel Selection Supports
- App Firmware Upgrade.
ENHANCED PACKING LIST
| 1. Transmitter | x1 |
|---|---|
| 2. Receiver | x1 |
| 3. Antennas | x3 |
| 4. User Guide | x1 |
| 5. Expansion Accessory | x1 |
| 6. Cold Shoe | x1 |
| 7. USB Type- Ato Type-C data cable | x1 |
| 1. Transmitter | x1 |
|---|---|
| 2. Receiver | x1 |
| 3. User Guide | x1 |
| 4. Expansion Accessory | x1 |
| 5. Cold Shoe | x1 |
| 6. USB Type-Ato Type-C data cable | x1 |
TYPICAL SETUP
PRODUCT INTERFACE
| A. TRANSMITTER | B. RECEIVER |
|---|---|
| 1. Antenna Interface | 1. Built-in Antenna |
| 2. OLED Screen | 2. OLED Screen |
| 3. Wheel Button | 3. Wheel Button |
| 4. Power Switch | 4. Power Switch |
| 5. Mounting Hole of the Expansion Accessory | 5. Mounting Hole of the |
Expansion Accessory
6. HDMI Lookout| 6. HOMI Out
7. HOMI Input| 7. UsB Type-C Interface
8. USB Type-G interface.| 8. 114 Screw Hole
9. 1/4 Screw Hole|
INSTALLATION
-
Install the antennas as demonstrated
-
Vertical Installation:
Secure the cold shoe with 1/4 screw hole at the bottom of the transmitter and mountitto the camera.
Horizontal Installation:
Connect the expansion accessary to the transmitter’s mounting hole and secure the cold shoe with hole at the expansion accessary. Then install them onthe camera -
Connect the HDMI input of the transmitter with camera’s by HDMI cable.
-
Connect to a power supply (Compatible with NP-F&70 or the same series of batteries)
-
Tum on the devices.
OLED DISPLY
| A. TRANSMITTER | B. RECEIVER |
|---|---|
| 1. Device D | 1. Device ID |
| 2. WiFi Signal Strength | 2. WiFi Signal Strength |
| 3. Fan Status Display | 3. Battery Voltage Display |
| 4. Battery Voltage Display | 4. Channel Display |
| 5. Channel Display | 5. video Format |
| 6. Video Format |
QUICK GUIDE
ENTER MENU
Long press the wheel button for about 3 seconds to enter the root menu
interface. Push up or down the wheel button to switch the menu page, press
down the wheel button to confirm
CHANNEL CHANGE
Push up or down the wheel button to change the channel at receiver or
transmitter. Press down the wheel button to confirm the channel, the channel
of the transmitter and receiver will be changed automatically and
synchronously.
10S System and Android System
Installation and Connection
- “Holly View” APP Download
|
---|---
https://a.app.qq.com/o/simple.jsp?pkgname=com.hollyview&fromcase=40002| https://apps.apple.com/cn/app/hollyview/id1460631425 - Enter the WiFi connection interface of the phone. Find the device’s WiFi (WIFi names as *HLD+ Device ID”). Input Wifi password o connect (Factory default password: 12345678). After the WiFi connection is successful, enter the APP to. monitor the screen.
PARAMETERS
| Transmitter| Receiver
---|---|---
Interface| HDMI Input (Type A Female) HDMI Loop out (Type A Female)
2 Antenna Interfaces (RP-SMA Male)® USB Type-C| HDMI Output (Type A Female)
USB Type-C
Supply Interface| USB Type-C Supply: 5V/2A Battery Supply: 5-12V DC| USB
Type-C Supply: 5V/2A Battery Supply: 5-12V DC
Power Consumption| <11W| <4W
Weight| 172.59®| 128.5g
Dimension| (12WH) : 106’61’21.8mm° The battery plate excluded| (L’WH) :
110’62’21mm The battery plate excluded
Input / Output Video Format| HDMI:
480p60 576p50 720p50/59.94/60 1080i50/59.94/60 1080p23.98/24/25/29.9130
1080p50/59.94/60| HDMI: 480p60 576p50 720p50/60 1080i50/60 1080p24/25/30 1080p
50/60
Frequency| 5GHz| 5GHz
Modulation Mode| OFDM| OFDM
Transmission Power| Maximum 21dBm| /
Receiver Sensitivity| /| -80dBm
Lowest Transmission Latency| About 0.1s| About 0.1s
Bandwidth| 20MHz| 20MHz
NOTES:
- Mars 300 PRO’s standard transmitter has the built-in antennas.
- Mars 300 PRO’s standard transmitter weighs 136g.
- Mars 300 PRO’s standard dimension is LWH: 110°61°21mm (the battery plate occluded)
SUPPORT
It encounter any problems in using the product or need any help, please follow
these ways to get more technical support:
Hollyland Products User Group
Hollyland
Tech
Hollyland Tech
support@hollyland-tech.com
www.hollyland-tech.com
WWW.HOLLYLAND-TECH.COM
WIRELESS VIDEO TRANSMISSION SYSTEM
Shenzhen Hollyland Technology Co., Ltd.
8F, 5D Building, Skyworth Innovation Valley, Tangtou, Shiyan, Bao’an District
Shenzhen, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>