HOLLYLAND C1 Pro Wireless Stereo Headset Double Ear Version User Manual
- June 1, 2024
- HOLLYLAND
Table of Contents
HOLLYLAND C1 Pro Wireless Stereo Headset Double Ear Version
Specifications:
- Transmission Range: 1,100ft (350m) LOS
- Frequency Band : 1.9 GHz (DECT) (varies by country and region)
- Modulation Mode : GFSK
- TX Power : 21dBm (125.9 mW)
- RX Sensitivity : < -90dBm
- Battery Capacity : 700mAh (2.66Wh)
- Charging Time : About 2.5 hours
- Frequency Response
- Signal-to-Noise Ratio
- Distortion
- Microphone Type: Electret
- Input SPL: > 115dBSPL
- Output SPL
- ENC
- Net Weight : About 250g(9oz) with batteries included
- Temperature Range
Product Usage Instructions
Operation Guide:
Microphone Boom Indicator Description:
The states are described below.
Operation Guide:
Button/Switch Description:
TALK/MUTE Button:
- Press the button to switch to the TALK mode, and press the button again to switch to the MUTE mode. In this case, the indicator light turns red.
- Press and hold the button to switch to the TALK mode (PTT function), and then release the button to switch to the MUTE mode.
ENC Switch:
- When the switch is pushed to the ENC position, yellow is displayed, and ENC is enabled.
- When the switch is pushed away from the ENC position, black is displayed, and ENC is disabled.
Safety Precautions:
Do not place the product near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to prevent the battery from overheating and exploding. Do not use non-original charging cases, cables, and batteries with the product. The use of non-original spare parts may cause electric shock, fire, explosion, or other dangers.
Support:
If you encounter any problems in using the product or need any help, please contact Hollyland Support Team via the following ways:
- Hollyland User Group
- HollylandTech support@hollyland.com
- www.hollyland.com
Trademark Statement:
Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no organization or individual may copy or reproduce part or all of any written or illustrative content and disseminate it in any form.
Note:
Due to product version upgrades or other reasons, this User Manual will be updated from time to time. Unless otherwise agreed, this document is provided as a guide for use only. All representations, information, and recommendations in this document do not constitute warranties of any kind, express, or implied.
FAQ
- Q: How do I pair the headset?
- A: Press and hold the A button for 5 seconds for pairing in a system without a hub. Press the A button to switch to group A headsets in a system with a hub.
- Q: How do I switch between TALK and MUTE modes?
- A: Press the TALK/MUTE button to switch between the TALK and MUTE modes. Press and hold the button to use the PTT function.
- Q: How do I upgrade the headset?
- A: Use the USB-C Interface for upgrade and USB-C to 3.5mm adapter.
Product Interfaces
Operation Guide
Microphone Boom Indicator Description
- Indicator light flashes : Unconnected (for remote headsets) *
- The indicator light flashes quickly: Pairing (The indicator light color is subject to the current state during pairing.)
- Indicator light stays ON : Master headset turned ON/Remote headset connected successfully
- A. Steady green light: ENC OFF
- B. Steady blue light : ENC ON
- C. Steady red light : MUTE
- Red indicator light flashes twice : Low battery
Sound Description
“Low battery”: The device battery is low.
- The indicator light flashes when a remote headset is not connected, and it stays ON by default when the master headset is turned ON.
Button/Switch Description
TALK/MUTE Button
- Press the button to switch to the TALK mode, and press the button again to switch to the MUTE mode. In this case, the indicator light turns red.
- Press and hold the button to switch to the TALK mode (PTT function), and then release the button to switch to the MUTE mode.
ENC Switch
- When the switch is pushed to the ENC position, yellow is displayed and ENC is enabled.
- When the switch is pushed away from the ENC position, black is displayed and ENC is disabled.
Parameters
Note: The frequency band and TX power vary by country and region.\
Safety Precautions
Do not place the product near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to prevent the battery from overheating and exploding.
Do not use non-original charging cases, cables, and batteries with the product. The use of non-original spare parts may cause electric shock, fire, explosion, or other dangers.
Support
If you encounter any problems in using the product or need any help, please contact
- Hollyland Support Team via the following ways:
- Hollyland User Group
- FB : HollylandTech
- INSTA: HollylandTech
- YOUTUBE: HollylandTech
- support@hollyland.com
- www.hollyland.com
Statement
All copyrights belong to Shenzhen Hollyland Technology Co., Ltd.
Trademark Statement
Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no organization or individual may copy or reproduce part or all of any written or illustrative content and disseminate it in any form.
Note:
Due to product version upgrades or other reasons, this User Manual will be
updated from time to time. Unless otherwise agreed, this document is provided
as a guide for use only. All representations, information, and recommendations
in this document do not constitute warranties of any kind, express, or
implied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>