HOLLYLAND 2TX+1RX Lark M2 Wireless Lavalier Microphone User Guide

HOLLYLAND 2TX+1RX Lark M2 Wireless Lavalier Microphone

Product Information

• Specifications
  • Product Name: LARK M2
  • Version: V1.0
  • TXTransmitter with Built-in Microphone
  • Mobile and Camera Versions Available
  • USB-C Port for Charging Lightning/USB-C Receiver Options
  • Noise-cancellation Feature
  • Status Indicators for Power, Pairing, and Mode 3.5mm Audio Output Jack
  • Back Clip and Clip Magnet for TX Placement

Product Usage Instructions

• First Use of Mobile Version
  • To start with your LARK M2 Mobile Version:
  • Open the charging case.
  • Connect RX to your phone, take out TX, and the microphone will power on and connect automatically.
  • The solid blue light on the TX and RX indicates readiness for use.
• First Use of Camera Version
  • To start with your LARK M2 Camera Version:
  • Open the charging case.
  • Connect RX to your phone, take out TX, and the microphone will power on and connect automatically.
  • The solid blue light on the TX and RX indicates readiness for use.
• TX Placement
  • The preferred placement for the TX is at the collar. If speaking with a loud volume, you can choose an upper chest position.
  • You can wear it using either the back clip or clip magnet.
  • Place the clip magnet on the back of the collar, and secure the TX on the front of the collar with the magnet.
  • Clip the back clip onto the collar, and secure the TX with the clip.
• LARK M2 Necklace Silicone Case
  • A magnet necklace for the clip magnet is included, allowing you to secure TX around your neck.
  • To achieve the best possible sound quality during recording, it’s important to place the TX correctly.
  • Make sure that the microphone is not covered by any cloth. If you are recording outdoors, it’s recommended to use a windscreen to minimize unwanted noise from wind and breathing.

FAQs

• Q: Can I use the LARK M2 with both mobile devices and cameras?
  • A: Yes, the LARK M2 comes in versions suitable for both mobile devices and cameras. Simply follow the appropriate setup instructions for your device.
• Q: How do I know if the TX and RX are paired correctly?
  • A: A solid blue light on both the TX and RX indicates that they are paired correctly and ready for use.
• Q: Where should I place the TX for optimal performance?
  • A: The preferred placement for the TX is at the collar. You can also choose an upper chest position for loud volumes. Ensure the microphone is not covered by cloth for best results.

Foreword

Thank you for choosing our product. Before usage, please read this Quick Guide carefully. We wish you a pleasant experience. To obtain Quick Guide and User Manual information in other languages, please scan the QR code below.

Product Overview

TX： Transmitter

Mobile Version RX: Receiver (Lightning/USB-C)

Camera Version RX: Receiver

Mobile Version

Camera Version

Product Usage

• First Use of Mobile Version
  • To start with your LARK M2, first unbox it, remove the TX insulating film, and place it back into the charging case.
  • The LARK M2 has already been paired at the factory, so the TX and RX will automatically pair when you use them for the first time.
  • Step 2: Connect RX to your phone, take out TX, and the microphone will power on and connect automatically. Solid blue light on the TX and RX indicates ready for use.

First Use of Camera Version

• To start with your LARK M2, first unbox it, remove the TX and RX insulating film, and place them back into the charging case.
• The LARK M2 has already been paired at the factory, so the TX and RX will automatically pair when you use them for the first time.
  • Step 2: Connect RX to your phone, take out TX, and the microphone will power on and connect automatically. Solid blue light on the TX and RX indicates ready for use.

TX Placement

1. The preferred placement for the TX is at the collar. If speaking with a loud volume, you can choose an upper chest position. You can wear it using either the back clip or clip magnet.
   • a. Place the clip magnet on the back of the collar, and secure the TX  on the front of the collar with the magnet.
   • b. Clip the back clip onto the collar, and secure the TX with the clip.
2. A LARK M2 Necklace Silicone Case magnet necklace for the clip magnet is included, allowing you to secure TX around your neck.
   • To achieve the best possible sound quality during recording, it’s important to place the TX correctly. Make sure that the microphone is not covered by any cloth. If you are recording outdoors, it’s recommended to use a windscreen to minimize unwanted noise from wind and breathing.

RX Connection

1. Plug RX (Lightning) into the phone
2. Plug RX (USB-C) into phone
3. Charge your phone through the RX for simultaneous charging and usage

Connect RX to Camera

1. Attach the RX to the camera’s hot shoe/cold shoe using the back clip;
2. Connect the RX’s 3.5mm audio output port to the camera’s 3.5mm audio input port using a 3.5mm TRS to TRS cable;
3. Set the camera’s recording volume to the minimum level and the RX’s output volume to the medium level to ensure best recording quality
   • USB-C to USB-C cable or USB-C to Lightning cable for connecting to your phone is optional.

Noise-cancellation

• Press the noise-cancellation button on the TX to turn the function on or off.
• When noise cancellation is on, the status indicator on the TX turns green.
• Press the noise-cancellation button on the mobile version RX to turn the function on or off. When noise cancellation is on, the status indicator on the RX turns green.

Video Recording Control

• While shooting with your phone, double-press the button on the TX to start or stop video recording.
• This function only works when the camera app of your phone supports the function of controlling video recording by pressing the volume key

Volume Adjustment (Camera Version RX Only)

• The factory default volume is set at a medium level, with three levels available: high, medium, and low.
• Turn the volume knob clockwise to turn the volume up.
• Turn the volume knob counterclockwise to turn the volume down.

Mode Switching (Camera Version RX Only)

• Connected to a phone: The green light stays on. Only support mono mode. Connected to a camera: The blue light stays on, indicating stereo mode; the green light stays on, indicating mono mode. To switch mode, simply press the mode switching button on the RX.

Charging and Storage

Automatic Charging

• When the status indicator on the TX turns into slow flashing red, or when both status indicators on the RX turn into fast flashing red, place them in the charging case and they will start charging automatically.
• Solid orange indicates charging in progress. Solid Green indicates charging is completed.

Manual Charging

• When the status indicator on the TX turns slow flashing red, you can charge the TX using the magnetic charger. Solid orange indicates charging in progress. Solid Green indicates charging is completed and the light will go off 30 minutes later.
• When both status indicators on the camera version RX turn into fast flashing red, you can charge the RX using the charging cable.
• Solid orange indicates charging in progress. Solid Green indicates charging is completed and the light will go off 30 minutes later.
• After usage, please promptly place the RX and TX back into the charging case for storage and charging.

Charging Case Indicator LED Description

• One LED ON 25% battery
• Two LEDs ON a 50% battery
• Three LEDs ON 75% battery
• Four LEDs ON 100% battery
• One LED ON, steady red Low battery level and cannot charge the RX and TX
• One flashing LED when connected via USB Charging
• Four LEDs sequences on Charging case updated

Support

If you encounter any problems in using the product or need any help, please contact the Hollyland Support Team via the following ways:

• Hollyland User Group
• HollylandTech
• HollylandTech
• HollylandTech
• [email protected].
• www.hollyland.com.

Statement:

• All copyrights belong to Shenzhen Hollyland Technology Co., Ltd.
• Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no organization or individual may copy or reproduce part or all of any written or illustrative content and disseminate it in any form.

Trademark Statement:

• All the trademarks are owned by Shenzhen Hollyland Technology Co., Ltd.

Note:

• Due to product version upgrades or other reasons, this Quick Guide will be updated from time to time.
• Unless otherwise agreed, this document is provided as a guide for use only.
• All representations, information, and recommendations in this document do not constitute warranties of any kind, express, or implied.
• P/N: 3003080427

References

• Hollyland - Wireless Video Transmitter, Intercom, Microphone

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>