Dream On Me Crib Instructions: 672 Folding Full Size Convenience Crib
- June 3, 2024
- Dream On Me
Table of Contents
The Dream On Me 672 Folding Full Size Convenience Crib is a practical and versatile option for parents looking for a portable crib that can be easily stored away when not in use. To ensure the safety and proper usage of this product, it is essential to follow the Dream On Me crib instructions provided in the user manual. This manual includes important information on the dimensions and thickness of the mattress required, as well as warnings and precautions to prevent accidents and injuries. The manual also includes step- by-step instructions on how to assemble and fold the crib, along with a limited warranty that covers defects in material and workmanship. For any questions or concerns, customers can contact Dream On Me’s customer care team via email or chat, or enter their monthly giveaway by scanning the QR code provided. By following these instructions and taking proper care of the crib, parents can ensure a safe and comfortable sleeping environment for their little ones.
Dream On Me 672 Folding Full Size Convenience Crib
Dream On Me Inc. 1532 S
Washington Ave Piscataway Township NJ 08854
- Email : info@dreamonme.com
- www.dreamonme.com
CAUTION ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 51-5/8″ (1310MM) BY 27-1/4″ (690MM) WITH A THICKNESS NOT EXCEEDING 6″ (150MM). THE CRIB CONFORMS TO APPLICABLE REGULATIONS PROMULGATED BY THE CONSUMER PRODUCTS SAFETY COMMISSION.
PARTS AND TOOLS INCLUDED
WARNING
- Failure to follow these warnings and instructions could result in serious injury or death.
- Read all instructions before assembling.keep instructions for future use.Upon completion of assembling, make sure all screws, bolts and fastening devices have been securely tightened.
- Never use this product if there are any loose or missing fasteners, loose joints.broken parts, or ton mesh/fabric. check before assembly and periodically during use.
- Contact DREAM ON ME for replacement parts and instructional literature if needed.
- Never substitute parts, the product including side rails, must be fully erected prior to use.
- Discontinue use of the product when child is able to climb out or reaches the height of 35in (900mm).
- Never place product near window where cords from blinds or drapes can strangle a child.
- When child is able to pull to standing position,set mattress/base to lowest adjustment positionand remove bumper pads, large toys ,and other objects that could serve as steps for climbing out. A child can trap parts of the body or clothing on loose fasteners.
- Never use plastic shipping bag or other plastic things as mattress covers because they can cause suffocation.
- CAUTION : Any mattress used in this crib must be at least 27-1/4inches(690mm) by 51-5/8 inches(131Omm),with a thickness not exceeding 6 inches(150mm), the dimensions of the mattress shall be taken from seam to seam or edge to edge where appropriate.
- Never use a water mattress with this product.
- Strings can cause strangulation! Never place items with a string around a child’s neck, such as hood strings or pacifier cords. Never suspend strings over product or attach strings to toys.
- Infants can suffocate in gaps between a mattress and crib side which is too small.
- On soft bedding never add a mattress, pillow or comforter.Never place additional padding under an infant.
- To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician. refinishing,use a non-toxic finish specified for children’s products.
- To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
- Follow warnings on all products in a crib. See head panel & mattress support for instructions and warnings.
- Replace teething rail if damaged,cracked or loose.
- Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC and ASTM. We do apologize for any inconvenience this may cause you.
INSTALLATION INSTRUCTIONS
- Assemble latch (i&) to the headboard (A&B) by using 5/8″ screw (k). Then assemble plastic block (n) horizontal to the headboard (A&B) by using 3/4″ screw (m). Tighten screws using a phillips head screwdriver.Make sure that the latch on the bottom of each headboard (A&B) are locked.
- Connect rail (C) and stabilizer bar (Dto the headboard (A & B)by screws (a) and nuts (b) ,wood dowel (d) ,washer (g), washer (h).DO NOT fully tighten the bolts.
- Slot in the metal pin into the notch of left and right headboard side corner post.then move up and down to adjust the mattress base into highest level.
- Connect rail (C) to the headboard (A& B) by screws (a),nuts (b),washer (g) and washer (h). THEN FULLY tighten all the bolts.
- Assemble castors (e& t) to the leg bottoms on the leg on headboard (A&B).2 castors (e) with brake are in the front. THEN add the mattress( F ).
- Select the desire level,and use both hand to lift up the mattress base,then adjust the level to your require height of the 2 level.slide in the bolt underneath the mattress board(E) to keep the mattress support fixed.
Follow bellow to fold the crib 
- take out the mattress (F)
- take out the mattress board (E)
- unlock the latch on the headboard
- fold the crib
LIMITED WARRANTY
- Dream on Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect.
- This warranty covers 30 days from the date of original purchase.
- This warranty is valid only upon presentation of proof of purchase.
- This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.
- This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
- This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
Scan the QR code to register your
producthttps://dreamonme.com/customercare/registration/ 
1532, S. Washington Avenue Piscataway, NJ 08854
- E-mail: info@dreamonme.com
- www.dreamonme.com
Enter our monthly giveaway! Simply scan the QRcode to register. 
Chat with us! For any questions or concerns or feedback.
SPECIFICATIONS
| Product Name | Dream On Me 672 Folding Full Size Convenience Crib |
|---|---|
| Manufacturer | Dream On Me Inc. |
| Address | 1532 S Washington Ave Piscataway Township NJ 08854 |
| info@dreamonme.com | |
| Website | www.dreamonme.com |
| Required Mattress Dimensions | At least 51-5/8″ (1310MM) by 27-1/4″ (690MM) |
with a thickness not exceeding 6″ (150MM)
Water Mattress Compatibility| No
Warnings| Follow all instructions and warnings provided in the user manual to
prevent accidents and injuries. Never use the product if there are any loose
or missing fasteners, loose joints, broken parts, or torn mesh/fabric.
Discontinue use of the product when your child is able to climb out or reaches
the height of 35in (900mm). Never place the crib near a window where cords
from blinds or drapes can strangle a child. Never add a mattress, pillow or
comforter on soft bedding. Tighten all fasteners to prevent strangulation.
Follow warnings on all products in a crib. Replace teething rail if damaged,
cracked or loose.
Limited Warranty| Covers defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 30 days from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included. This warranty does not apply to
any product which has been improperly assembled, subjected to misuse or abuse
or which has been altered or repaired in any way.
FAQS
What are the dimensions of the mattress required for the Dream On Me 672 Folding Full Size Convenience Crib?
The mattress used in this crib must be at least 51-5/8″ (1310MM) by 27-1/4″ (690MM) with a thickness not exceeding 6″ (150MM).
Can I use a water mattress with this product?
No, you should never use a water mattress with this product.
What should I do if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric?
You should check for any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric before assembly and periodically during use. If there are any issues, contact Dream On Me for replacement parts and instructional literature if needed.
What should I do if my child is able to climb out or reaches the height of 35in (900mm)?
Discontinue use of the product when your child is able to climb out or reaches the height of 35in (900mm).
Can I place the crib near a window where cords from blinds or drapes can strangle a child?
No, you should never place the crib near a window where cords from blinds or drapes can strangle a child.
Can I add a mattress, pillow or comforter on soft bedding?
No, you should never add a mattress, pillow or comforter on soft bedding.
How do I fold the Dream On Me 672 Folding Full Size Convenience Crib?
To fold the crib, take out the mattress (F), take out the mattress board (E), unlock the latch on the headboard, and then fold the crib.
What is covered under the limited warranty?
The limited warranty covers defects in material and workmanship and agrees to remedy any such defect. This warranty covers 30 days from the date of original purchase. This warranty is valid only upon presentation of proof of purchase.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>