3B Medical Luna G3 BPAP S Non Invasive Ventilation User Manual

June 6, 2024
3B Medical

3B Medical Luna G3 BPAP S Non Invasive Ventilation User Manual
3B Medical Luna G3 BPAP S Non Invasive Ventilation

Button Functions

Home Button: Return to the previous menu or main interface
Knob: Adjust device settings
Start / Stop Button: Start / Stop delivering air

Setting up the Device

Setting Instructions

  1. Connect one end of the tube to the assembled mask.
  2. Connect one end of the tube to the air outlet of the device, as shown in the figure above. Or connect the heated tubing joint to the air outlet of the device, and then insert the power plug into the heated tubing port on the back of the device.
  3. Connect the power adapter to the DC inlet of the main device.
  4. Connect the power cord to the power adapter.
  5. Plug the power cord into the power outlet.

Adjusting Device Settings

  • Connect the power cord and power adapter properly, The screen displays the Main Interface shown in the figure left below, press the Start / Stop Button , and the device will start delivering air, the screen displays the Main Interface shown the figure middle below (applicable to Luna G3 BPAP 25A model) or as shown in the figure right below (applicable to Luna G3 BPAP S/T model).
    Adjusting Device Settings
    Adjusting Device Settings

  • Turn the Knob **** to access the Initial Setup Interface of the Patient Menu, as shown in the figure left below. The Heated Tubing option can only be adjusted when the device is connected to the heated tube, as shown in the figure right below.
    Adjusting Device Settings

  • Press the Knob ****to access the Setup Interface, as shown in the figure below.
    Adjusting Device Settings

  • Turn the Knob **** to adjust an option.
    Adjusting Device Settings

  • Press the Knob **** to confirm your adjustment to the option.
    Adjusting Device Settings

  • The cursor switches among the options as you turn the Knob , as shown in the figure below. Refer to steps C-E to adjust other options. Press the Home Button   **** to exit the Setup Interface.
    Adjusting Device Settings

Starting Treatment

After you finish adjusting device settings and return to the Main Interface, press the Start / Stop Button ****to start treatment.

Documents / Resources

| 3B Medical Luna G3 BPAP S Non Invasive Ventilation [pdf] User Manual
Luna G3 BPAP S, T Luna G3 BPAP 25A, Luna G3 BPAP S Non Invasive Ventilation, Non Invasive Ventilation
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals