TESmart HKS0401B2U 4K HDMI 4-Port KVM Switch 4K User Manual
- June 5, 2024
- TESmart
Table of Contents
USER MANUAL
Features :
- Using only 1 set of keyboard, mouse, and monitor to control 4 computer devices
- Support UnixNVindows/Debian/Ubuntu/Fedora /Mac OS X/Raspbian/Ubuntu for Raspberry Pi and another Linux based system
- Support auto-switching to monitor computers in a specified time interval
- Support front panel buttons, IR signals, keyboard hotkeys, and mouse gestures to control KVM switch to switch inputs
- Available to use keyboard and mouse without any delay after switching input sources
- Support resolution up to 3840″2160@30Hz
- With USB 2.0 hub port, it is possible to connect a bar code scanner, USB hard drive or other USB devices to KVM
- With EDID emulators in each input port, keep PCs always having correct display information
- Support DVI-D single link sources and displays with the use of HDMI-to-DVI adapters
Packing List:
1 HDMI KVM Switch
1 DC 5V power adapter
1 IR remote control
1 User’s manual
4X1 Panel Description
ID
| Name|
Description
---|---|---
1| Fast switching mode indicator and sensitivity adjust button| LED will
be lit if the fast switching mode (Mouse gesture) is activated.
Press the button to change the sensitivity of the mouse movement recognition
2| IR receiver| Receive IR remote signal
3| Input selection button| Select input sources
4| Input selection status| Indicate the currently selected input source
5| USB connection status| LEDs will be lit if the USB data ports are
connected to the computers’ USB port
6| Power switch| Turn on or off the power supply
7| DC 5V input| DC 5V power supply
---|---|---
8| HDMI output| Connect to HDMI display
9| Standard USB 2.0 port| Connect to USB 2.0 devices, printer, barcode
scanner, USB drives
10| Keyboard and mouse input| For USB keyboard and mouse input, including
wireless keyboard and mouse
11| HDMI input ports| Connect to HDMI source devices
12| USB data ports| Connect to PC by USB type B to type A cable
4×1 Connection Diagram
HOW TO USE :
- Setup the connection according to the connection diagram.
- After all the PCs are started in step 1, then you can switch to any PC by keyboard hotkeys, IR keys, or the keypad on the KVM front panel. (For example, if you want to control the PC connected to HDMI IN 2 just press the “Select” button on the front panel, or press the digit button “2” on the remote control, or the keyboard hotkey commands described following)
HOW TO USE KEYBOARD HOTKEYS:
- Hit ScrollLock key twice within 2 seconds, the buzzer will beep twice.
- After step 1 enters the following hotkey commands within 3 seconds, the KVM will execute the corresponding commands.
Note: 3.4 are for 4×1 KVM
If fast switching mode is activated, then double hit the left or right bound of the screen with the mouse pointer in 1 second, KVM will switch to the previous or next input.
Note: default auto-
switching time interval is 6 seconds, you are able to change this value by
following hotkey commands:
Note:1 second per step, the
time is up to 250 seconds.
Note: Execute this hotkey command to exit auto-switching mode.
IR Remote Control
Note:
- For the safety request by some express companies, the remote control is not equipped battery by default.
- Unspecified buttons at above are non-functional.
Warranty Information :
We warrant this product as free of defects in material and workmanship for a period of one (1) year from the date of shipment. If during the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that this product has not been subjected to mechanical, electrical, or other abuse or modifications. If it fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for six (6) months from the day of reshipment to the buyer.