TESmart HSW0501A10 HDMI Switch User Manual
- June 6, 2024
- TESmart
Table of Contents
TESmart HSW0501A10 HDMI Switch
Preface
It’s our great honor that you have chosen the HDMI switch produced by our
company, Tesla Elec Technology Co., Ltd. In this user guide, you will learn
how to operate and use this product. Please read this user guide
comprehensively before use. If you have any questions, comments, or
suggestions, you can contact us via the following
email:tech@tesmart.com.
Copyright Notice
The user guide, compiled by Tesla Elec Technology, shall not be duplicated or
translated by any person or organization without written permission. This user
guide shall not be used for commodity transactions in any form or by any means
(electronically, mechanically, photocopying or recording, etc.) or be used for
any business practices or profitable activities. The ownership of the trade
names and brand names adopted in this user guide belongs to their companies.
Address of Manufacture
Tesla Elec Technology Co.,Ltd 2F, Building C, Xingzhisheng Industrial Park,
No.12, Xiawei Industrial Zone, Zhangkengjing Road, Guanlan Street, Longhua
District, Shenzhen City, Guangdong province, China
Features
- With 3/5 HDMI inputs and 1 HDMI output
- Support resolution up to 4K@30Hz
- HDCP 1.4 compliant
- Support auto input detection
- Support ARC
- Switch between 3/5 inputs using the front panel key and IR remote control
Packing List
- 3Xl /5Xl HDMI Switch 1 * USB Power cable
- IR Receiver cable
- IR Remote control
- User manual
lips : After receiving the product, please check the packing list carefully to make sure that no components have been lost and no damage to the product has been caused during transportation. If you have any problems, please contact us.
Panel Description
Panel Description (3×1 HDMI Switch)
| ID | Name | Description |
|---|---|---|
IR receiver
| Receive IR signa l, connect IR receiver extension cable to this port
2
|
DC SV
|
SV DC power supply
|
HDMI inputs
|
Connect to HDMI source
devices
4
| HDMI output| Connectto HDMI display
| I nput selection button|
Select input source
6
| Input connect ion
status
|
In dicate current selected
input source
Panel Description (Sxl HDMI Switch)
ID
| Name| Description
---|---|---
|
IR receiver
| Receive IR signal, connect IR receiver extension cable to this port
|
DC SV
|
SV DC power supply
|
HOMI inputs
| Connect to HDMI source
devices
4
| HDMI output| Connect to HDMI display
| Input selection button| Select input source
| Input connection
status
|
Indicate current selected
input source
Connection Description
Connection Diagram (3X1 HDMI Switch)
Connection Diagram (5X1 HDMI Switch)
Connection Steps
- Connect the input device to the input ports using 3 or 5 HDMI cables.
- Connect the switch to the display device using 1 HDMI cable.
- Connect with the attached USB power cable to a DC 5V power adapter for the additional power supply. {Optional)
- Plug the IR receiver into the switch, then you can select the input source by remote control.
Tips:
- Since the default product package provides no power adapter, the switch can be powered either by connecting the USB cable provided with the package to the USB interface of the input device, or though connecting the USB power cable to a 5V 2A power adapter.
- AAA batteries should be installed before the use of the remote control. Please refer to Chapter 5 on Page B for detailed information about how to use the remote control.
IR Remote Control
- Switch to input port 1
- Switch to input port 2
- Switch to input port 3
- Switch to input port 4 {Only for 5 to 1 switch)
- Switch to input port 5 {Only for 5 to 1 switch)
- Switch to the next input port
Tips:
- By default, the remote control is not equipped with batteries, due to the safety requirements of some express companies. Install AAA dry cells before use.
- The unspecified buttons at above are non-functional.
Auto Detection Mode
The switch will automatically select the input source when:
- New power on the source device is plugged in;
- Turn on a source device that had been connected to the switch.
Turn on/off Auto Detection Mode
Auto-detection mode is on by default. If you want to turn off auto-detection
mode, press and hold the [SELECTED] button until all the indicators are lit,
unplug all the cables (including USB power cable and HDMI cables) then plug
them back. The method of turning it on is the same.
Warning: HSW0301A 10 does not support turning off auto detection mode.
Warranty Information
- We warrant that this product will be free of defects in material and workmanship for a period of one (7) year from the date of shipment.
- If within the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that the product has not been subjected to mechanical and electrical damage, or other abuse or modifications.
- If it fails under conditions other than those covered, its repair will be charged in accordance with the current price of parts and labor in effect at the time of repair. Such repairs are warranted for six (6) months from the day of reshipment to the buyer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>