ESORUN StandUP TM10000 5 In 1 Magnetic Wireless Charging Station User Manual
- June 13, 2024
- ESORUN
Table of Contents
ESORUN StandUP TM10000 5 In 1 Magnetic Wireless Charging Station
Product Information
The device is designed to comply with part 15 of the FCC Rules. It operates under the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
The device has also been evaluated to meet general RF exposure requirements.
Product Usage Instructions
Please follow the instructions below for proper usage of the device:
- Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer. Unauthorized modifications may void your authority to operate the equipment.
- Ensure that the device is operated in accordance with part 15 of the FCC Rules to prevent harmful interference.
- If the device encounters interference that may cause undesired operation, it must be able to accept and continue functioning.
- It is recommended to position the device in a way that
minimizes RF exposure. Keep a safe distance from the device, especially during prolonged usage.
Please refer to the complete user manual for additional information and detailed instructions on operating this device.
SPECIFICATION
PRODUCT STRUCTURE
- Magnetic Charging Area for iPhone 12/13/14Series
- Wireless Charging Pad for Airpods
- Wireless Charging Pad for Apple Watch
- Digital Display Screen of Battery Power
- Charging Indicator for iPhone
- Charging Indicator for Airpods
- Switch
- Type-COutput/lnput
- Micro USB Input
- SB-AOutput
Angle Adjustable
Warning
- The power bank stand will generate heat when charging (it is normal for the wireless charging technology). Please use it in a well-ventilated area when charging.
- Keep the power bank stand away from heat sources, direct sunlight, humidity, water or other liquids.
- Do not operate the power bank stand if it is wet or damaged to prevent electric shock and explosion. Do not repair without unauthorized.
- Do not use the power bank stand with wet hands.
- Do not use the unit for purposes otherthan its intended use.
HOW TO USE
Use of switches
- By pressing the switch once, the product will turn on with the power display screen illuminated. This indicates that the device is in standby mode and is ready for normal operation. It also charges automatically when the device is placed directly on it.
- Press the switch twice in a row to turns the power off and the device will stops working.
- Tips: In standby mode, it will turn off automatically after about 25 seconds without performing other operations.
When you directly take away the device being charged, this product will also automatically power off in about 3 seconds.
Power digital led screen
Recharging
You need to charge the product when the power or battery is low. You can use Micro USB or TYPE-C standard charging cable to connect this product and plug USB A into QC/PD adapter to charge the product.
- lnsert the USB charging cable USB A end into Output.
- Plugthe end of the cable into a terminal such as phone.
Pass Through Charging
You can put your iPhone 12/13/14 and subsequent series, Airpods and Apple
watch on the corresponding charging area and connect this charging station to
the power source (PD 20W or QC 3.0 18W). It will charge the power bank stand
itself and your iPhone 12/13/14 and subsequent series, Airpods and Apple watch
at the same time .
Wireless Charging
Please fit the product with the back of your iPhone (12/13/14 and subsequent
series) or other wireless charging phone (which with magnetizing ring
attached), it will charge your phone automatically via the built-in magnetic
wireless charging, Max to be 15W, iPhone series is 7.SW.
Note:
The multi-function wireless power stand is mainly used for 12/13/14 and subsequent series, or phones with magnetizing rings attached.
Wireless Charging for Airpods
Please lay down your TWS earphone to the charging area and press the switch
button(SW Max).
Wireless Charging for Apple Watch
Make sure your Apple Watch is stick to the Magnet of the Wireless Charger for
Apple Watch It will automatically detect the Apple Watch and discharge it.
When your wireless charging is not working properly
- Clean the clutter on the wireless charge
- Please make sure the wireless charging coil is correctly positioned with the phone coil.
- When the wireless charger is overheating, keep your mobile device away from the wireless transmitter Please wait for the wireless transmitter to cool down before trying to charge it.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.