vremi 50 x 60 Inches Throw Heated Blanket User Guide

vremi 50 x 60 Inches Throw Heated Blanket

Product Information

The Electric Blanket is a household product designed to provide warmth and comfort during use. It features a Power Cord, Blanket Connector, Control Panel, and Control Connector for easy operation. The blanket has temperature selection options, an indicator for heat level settings, and an auto-off feature for safety. It is important to follow the safety instructions and maintenance guidelines provided in the user manual to ensure proper usage and longevity of the product.

Product Usage Instructions

Plugging in Your Blanket

1. Before each use, inspect the Power Cord, Control Panel, and Blanket for any damage.
2. Plug the Control Connector into the Blanket Connector, ensuring a tight fit. Do not connect them if the Blanket has just been washed. Both connectors should be completely dry before joining them. (Refer to Fig. 1)
3. Plug the product into a 120 V AC electrical outlet.

Fig. 1: Illustration of connecting the Control Connector to the Blanket Connector

Temperature Selection
Be cautious of burns even when setting the temperature at a low level. Check your skin under the Blanket frequently.

Temperature Selection Options:

Pre-heating Your Blanket
Note that the Control Panel displays the internal blanket temperature, which will be lower than the external blanket temperature.

Using Your Blanket

1. Place the Blanket on top of your body, ensuring there are no folded areas for even heating.
2. Turn the product off by pressing the On/Off button. Unplug it when not in use.

Auto Off Settings
The Blanket is designed to automatically turn off after a set period of time. You can customize the auto-off duration as follows:

1. After turning on the Blanket and selecting the desired heat setting, press the button repeatedly until the desired amount of time is displayed. The time display will flash for 3 seconds and then stay illuminated.
2. When the Blanket is turned off, it will reset to the default setting of 4.0 hours. Follow step 1 to change the Auto Off settings.

Note : The Control Connector should not be covered during use.

Cleaning & Maintenance
Washing Instructions:
Warning: Never dry clean or use bleach. Before washing, disconnect all cords. Do not submerge cords or control unit in water. (Refer to Fig. 2)

1. Machine Wash: Place the textile portion without cords in the washing machine and use a gentle or delicate cycle.

Drying Instructions:

1. Machine Dry: Put the Electric Blanket into a dryer on low heat and allow it to tumble until dry. Ensure that the textile has enough room to tumble freely. If the product shrinks slightly during washing, gently stretch it while still damp until it returns to its original size.

Thank you for choosing our Electric Blanket. Before using your unit, please read this manual carefully. Should you have questions, please contact Customer Service at vremi.com/chat, 646-490-9904 or support@vremi.com.

IMPORTANT SAFETY INSTRUCTIONS

DANGER To reduce risks of burns, electric shock, fire, and personal injury, this product must be used in accordance with the following instructions:

• Never trap or pinch any of the electrical cords in any way. Make sure the cords are never rested between the mattress and box springs.
• The heated area should always lie flat to prevent overheating.
• If the plug does not fit into your outlet, contact a qualified electrician.
• Be sure that the power supply is used only on 120 V, 60 Hz current supply.
• Make sure the cord from the Controller to your heated product is connected and locked tightly.
• You may use this electric product with any sheets, mattress pads, or other blankets but never in combination with any other electric blankets or electric mattress pads.
• The warming product should never be folded, balled up, or bunched in anyway when in use. Any improper use (such as the above actions) may result in overheating and/or permanent wrinkling of the fabric.
• Do not use with generators, power converters, or inverters.
• Never use pins in and around the warming product.
• Cats, dogs, and other pets should always be kept away from the product, as a sharp claw may result in damage to the heating element.
• Always turn off the electric current when the warming product is not in use, either by turning off the Controller or unplugging from the wall outlet.
• Wrapping of the cord around the controls may damage the cord. Loop loosely when storing.
• Never iron your warming product.
• Never use dry cleaning fluid on this product. Cleaning solvents may damage the wiring insulation.
• Do not tuck in the wired area of this bedding.
• Do not route electrical cords between the mattress and box spring.
• Do not allow the cords to be pinched.
• Do not use pins. They may damage the electric wiring.
• Keep the control away from drafty areas that may become damp or wet, such as an open window.
• Be sure that this bedding is used on an alternating-current supply circuit of the proper voltage.
• Make sure to unplug, or turn off the appliance when not in use. Excessive heating may result from folding bedding, other than a mattress, when in actual use.
• If improper operation of this bedding is observed, discontinue its use immediately and consult the manufacturer or the dealer regarding its repair.
• For throw blankets only: Do not use with rocking chairs, recliners, chairs with casters or wheels, or other furniture subject to movement.
• Do not tuck the Blanket or supply cord in a sofa or other furniture. All portions of the Blanket or the Controller should be visible at all times.
• This Electric Blanket has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• This product is not designed or intended for use by children 12 years of age or younger. Do not use this product with an immobile person or anyone insensitive to heat, such as a person with poor blood circulation.

DANGER

• Do not sit on the Blanket.
• Do not use while sleeping.
• Never position the Blanket underneath the body.
• Do not fold the Blanket.
• Avoid sharp folds that may damage the product.

SAVE THESE INSTRUCTIONS
For Household Use Only

Blanket Features

1. Power Cord
2. Blanket Connector
3. Control Panel
4. Control Connector

Operating Instructions

PLUGGING IN YOUR BLANKET
Before each use, always inspect the product to ensure there is no damage to the Power Cord, the Control Panel, and the Blanket.

WARNING

1. You have to plug the Control Connector into the Blanket Connector. Make sure they fit together tightly. Do not connect them if the Blanket has just been washed. Make sure both Connectors are completely dry when joining them. ( Fig. 1)
2.  Plug the product into a 120 V AC electrical outlet.

TEMPERATURE SELECTION

1.  Press the “On/Off“ button on the Control Panel. The Display will illuminate and all icons willdisplay. As a default setting, the Blanket will be set to “85°F”, the lowest heat level. You will also see a “4 h” symbol, indicating the Blanket should automatically switch off after 4 hours.
   WARNING
   Burns may occur even if you set the temperature at low level. Check your skin under the Blanket frequently.

2. To change your desired heat level, press the + button for a higher heat level or the

   • button for a lower heat level. You can set it within 3 seconds after turning on, and “SET“ will appear for about 3 seconds, and then display the real-time temperature of the pad.

TEMPERATURE SELECTION|

INDICATOR

|

HEAT UP ELAPSED TIME

---|---|---
Low| 85°F| 15 min
2| 90°F| 20 min
3| 95°F| 30 min
4| 100°F| 40 min
5| 105°F| 50 min
High| 110°F| 60 min

DISPLAY OF HEAT LEVEL SETTINGS

PRE-HEATING YOUR BLANKET

NOTE: The maximum heating level that can be set is 110°F. The fastest way to preheat is to set the product at a high heating level after turning on it. Set with the high heating level, and then set with a proper level after the desired temperature has been reached. It’s recommended not to use it with the high heating level for too long.
IMPORTANT NOTE: The Control Panel displays the internal blanket temperature, not the external blanket temperature, which will be lower than that displayed.

USING YOUR BLANKET

1. Place the Blanket on top of the body. If the Blanket does not heat evenly, make sure there are no folded areas.
2. Turn the product off by pressing the “On/Off“ button. Unplug it when not in use.

AUTO-OFF SETTINGS
This Blanket is designed to turn off after a set period of time. You can set it at 0.5 hour (30 minutes), 1.0 hour, 1.5 hours (90 minutes), 2.0 hours (120 minutes), 2.5 hours (150 minutes), 3.0 hours (180 minutes), 3.5 hours (210 minutes) and 4.0 hours (240 minutes).

1. After turning on the Blanket and selecting the desired heat setting, press the button repeatedly until the desired amount of time is displayed. Time display will flash for 3 seconds, and then stay illuminated.
2. When the Blanket is turned off, it is reset to default settings (4.0 hours). Follow step 1 to change the Auto Off settings.

WARNING
The Control Connector cannot be covered when in use.

Cleaning & Maintenance

WASHING INSTRUCTIONS
WARNING
Never dry clean or use bleach. Before washing, disconnect all cords. Do not submerge cords or control unit in water. ( Fig. 2)

In the event this product malfunctions, or you believe it is defective, please contact Customer Service at vremi.com/chat, 646-490-9904 or support@vremi.com and hold onto the defective product (pending further instruction). A defective product should be clearly marked or stored where it cannot be used by mistake. Failure to keep the product in its original quality from the time of receipt may impede Vremi®’s ability to correct any legitimate problem and may limit the extent to which Vremi® may provide recourse.

1. Machine Wash
   Place the textile portion without cords in the washing machine. Machine wash on a gentle or delicate cycle.

2. Hand Wash
   Washing your warming product by hand is the best way to make it last. Wash your textile separately by hand in lukewarm (100°F) water using a small amount of mild laundry soap or detergent. Gently work the textile up and down. Do not rub or scrub. Rinse thoroughly in cool water. Squeeze excess water out by hand; never twist. Do not use a wringer.

DRYING INSTRUCTIONS

WARNING

• Do not use commercial dryers at the laundromat. They may be extra hot and could damage the wiring. Do not iron. Do not plug in until completely dry.
• If the Blanket gets damp by accident, please only use after it has fully dried.

1. Machine Dry
   Put your Electric Blanket into a dryer on low heat and allow it to tumble until dry. Ensure that the textile has enough room to tumble freely. If the product shrinks slightly in during washing, while still damp, gently stretch until it returns to its original size.

2. Line Dry
   You can line-dry your Blanket by simply draping it over two parallel clotheslines or a shower rod. The head and foot of the Blanket should both be facing down. Do not use clothes pins that could pinch wires.

STORAGE

• Store as you would for any other bedding, folded in a dry place.

Troubleshooting

Blanket will not turn on.

|

∙   Make sure that the Plug is plugged securely into a 120 V / 60 Hz outlet.

∙   Make sure that the Connectors are connected and fully inserted.

The Control Panel displays “F2” error code.

|

∙   The Control Connector and the Blanket Connector are separated. Unplug the Blanket first, and then reconnect the Connectors. Make sure they are connected securely and tightly. Then plug in and re-start the Blanket.

Warranty Information

Vremi® offers a 12-month warranty on all of our products purchased new and unused from Vremi® LLC or an authorized reseller, with original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacturing, parts or workmanship during the Warranty Period. The warranty does not apply where damage is caused by other factors, including but without limitation to: (a) normal wear and tear; (b) abuse, mishandling, accident or failure to follow operating instructions; (c) exposure to liquid or infiltration of foreign particles; (d) servicing or modification of the product other than by Vremi®. These are our general terms for the warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. If you experience an issue with a Vremi® product, please contact us at support@vremi.com, and we will do our best to resolve it for you.

This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This product may not cause harmful interference and
2. This product must accept any interference received, including interference that may cause undesired operations.

WARNING : This manual is to be used with all items with the model numbers: VRM010679N
RATING : 120 V AC, 60 Hz, 145 W, 1.2 A, AC ONLY.
WARNING : Keep all plastic bags away from children.

Drop Us A Line
We’re Here To Help:
vremi.com/chat
646-490-9904
support@vremi.com

Questions?
vremi.com/chat
support@vremi.com 646-490-9904

References

• Support – Vremi® Home & Kitchen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>