Hyfire HFI-DMBS-01 Vega Adaptor Base with Shorting Clip Instruction Manual
- June 12, 2024
- Hyfire
Table of Contents
Hyfire HFI-DMBS-01 Vega Adaptor Base with Shorting Clip Instruction Manual
GENERAL DESCRIPTION
These adaptor bases are used to install Standard Vega and Vega Lite analogue-
intelligent fire detectors on the ceiling’s surface.
This type of adaptor base is characterized by a shorting clip connecting the
two negative terminals; this feature allows more flexibility when connecting
Standard Vega or Vega Lite intelligent detectors to the loop, permitting the
continuity of the loop cabling to be tested after installation and prior to
the detector being fitted.
This manual explains how to apply analogue loop wiring to these base adaptors
according to the detector type; wiring is provided for Standard Vega and Vega
Lite detectors.
ANALOGUE SYSTEM WIRING FOR STANDARD VEGA AND VEGA LITE DETECTORS
Refer to picture 1 for the analogue-intelligent wiring configuration for the
Standard Vega and Vega Lite detector.
Picture 1
WARNING:
FOR STANDARD VEGA ENSURE THAT THE SHORTING CLIP IS EITHER CUT OR REMOVED
PRIOR TO SYSTEM COMMISSIONING
STANDARD VEGA AND VEGA LITE
WARNINGS AND LIMITATIONS
Our devices use high quality electronic components and plastic materials that
are highly resistant to environmental deterioration. However, after 10 years
of continuous operation, it is advisable to replace the devices in order to
minimize the risk of reduced performance caused by external factors. Ensure
that this device is only used with compatible control panels. Detection
systems must be checked, serviced and maintained on a regular basis to confirm
correct operation.
Smoke sensors may respond differently to various kinds of smoke particles,
thus application advice should be sought for special risks. Sensors cannot
respond correctly if barriers exist between them and the fire location and may
be affected by special environmental conditions.
Refer to and follow national codes of practice and other internationally
recognized fire engineering standards.
Appropriate risk assessment should be carried out initially to determine
correct design criteria and updated periodically.
WARRANTY
All devices are supplied with the benefit of a limited 3 year warranty
relating to faulty materials or manufacturing defects, effective from the
production date indicated on each product.
This warranty is invalidated by mechanical or electrical damage caused in the
field by incorrect handling or usage.
Product must be returned via your authorized supplier for repair or
replacement together with full information on any problemidentified. Full
details on our warranty and product’s returns policy can be obtained upon
request.
Hyfire Wireless Fire Solutions Limited – Unit B12a, Holly Farm Business Park,
Honiley,
Warwickshire, CV8 1NP – United Kingdom
info@hyfirewireless.co.uk
www.hyfirewireless.com
L20-LVB10-1400 (vA.2)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>