AM ARROWMAX SES PRO Smart Motion Electric Screwdriver User Manual
- June 15, 2024
- AM ARROWMAX
Table of Contents
red winner 2021
innovative product
MANUAL
Smart Motion Control Electric Screwdriver Set 96+6
Screwdriver Structure Diagram
Thank you for choosing SES PRO
(Smart Motion Electric Screwdriver). Please read the instructions manual
carefully.
Product description:
The Arrowmax SES PRO (smart motion control electric screwdriver) is equipped
with the best 32-bit microprocessor, 3-axis gyroscope and has a HD OLED
interface.
SES PRO weighs at only 52g, using lithium battery (500 mAh) that is designed
specifically for long hour usage. The battery level is indicated on the OLED
display and can be recharged by using a USB Cable.
The user-friendly interface of the SES PRO is seamless and allows for
torsional force and speed to be fully adjustable with a single on/off button.
The OLED display will indicate the rotational directions during operation.
There are also four pre-set torsional steps for users to choose from.
The SES PRO handle comes in quadratic shape with curved surface to achieve the
best control and grip during operation.
SES PRO is with a precision screwdriver set 96 in 1. The internal structure is
compact. There are 96 different types of bit. Most 3C products, computers,
four-axis unmanned machines, glasses, clocks, toys, models, etc, can be
installed and disassembled.
Operation method:
Gear setting: Press the switch button three times to enter the gear setting
interface, and press the switch button to select the working modus of the
screwdriver. After the selection is completed, press the switch button or let
go and wait for the data to be saved and automatically return to the standby
interface.
Gear Setting Interface (Five
Gears Freely Adjustable)
A) Auto Sensing mode, the rotation speed of the Screwdriver is controlled according to the angle of the hand rotation (0-200rpm).
- Maximum Torque mode 2.0kgf.cm
- High Torque mode 1.5kgf.cm
- Medium Torque mode 1.0kgf.cm
- Low Torque mode 0.5kgf.cm
Working Status:
- Press and hold the switch key, turn the screwdriver clockwise with the gesture to the right, that is, turn the screwdriver to the right, the screw logo on the OLED screen will move down and the arrow mark will dynamically display to the right.
- Press and hold the switch key, turn the screwdriver anti-clockwise with the gesture to the left, that is, turn the screwdriver to the left, the screw logo on the OLED screen will move down and the arrow mark will dynamically display to the left.
Storage Instructions:
- Press the top of the storage box, the inner box of the storage box pops out to open.
- Press the top of the inner box once more to close the storage box.
Precision screwdriver storage:
- The precision screwdriver is fixed to the inner box of the storage box in the form of a buckle.
- After use, put precision screwdriver back into the tray.
- Bits are accommodated in the inner box by magnetic absorption. After using the bit, back into the slot, the bit can be absorbed by itself.
- Take out the bit from the slot and insert it into the bit installation port.
Precision screwdriver box set
- Inner Box
- Precision Screwdriver
- Bits
- Storage Box
Product parameters:
- Product model: AM-199813
- Battery voltage: 3.7V
- Size: 15 x 15 x 136 mm
- Lithium battery: 500 mAh
- Weight: 52g
- No-load speed: 200r/min
- Electric maximum torque: 2.0kgf.cm
- Charging time: 80 minutes
Product list:
1x SES PRO
1x Magnetic pad
1x Power tip extension
1x Type-C cable
1x SES thor stand
1x Manual
1x Precision screwdriver storage box
1x Precision screwdriver
48x S2 steel 4mm double end screwdriver bits
Warranty
12 Months warranty
Note
The following situations are excluded from the warranty:
- Damage caused by force majeure.
- Accidental damage, misuse, abuse, neglect.
- Improper repair or alteration by unauthori zed persons.
- Expired warranty period.
Authentication
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
**** This symbol indicates that this product shall not be treated as
household waste.
Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment.
Contact us
Manufacturer: Freemax Technology Co.,Ltd.
Address: Room 1203, 12/F, Wah Shing Centre,
11-13 Shing Yip Street, Kwun Tong, Hong Kong
Email: amarrowmax@afterservice.vip
Get 24/7 Assistance at
Use camera or QR scanner to scan
Or Visit: https://amarrowmax.afterservicevip
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>