Wi-Tek WI-CPE515H-KIT 5GHz 300Mbps Outdoor CPE With IP Camera User Guide
- June 13, 2024
- Wi-Tek
Table of Contents
Wi-Tek WI-CPE515H-KIT 5GHz 300Mbps Outdoor CPE With IP Camera
Package content
Hardware Overview
Mounting
Pole-Mount
- Insert the Ball Joint Mount into the Lock Ring with the threads of the Lock Ring facing the ball joint.
- Open the Metal Strap and feed it through the base of the Ball Joint Mount.
- Wrap the Metal Strap around the pole. Use a screw driver to turn the screw clockwise and securely fasten the strap to the pole.
- Attach the device to the Ball Joint Mount and turn the Lock Ring to secure it. Keep the Lock Ring loose enough to allow the device to pivot for aiming.
Wall-Mount
- Insert the Ball Joint Mount into the Lock Ring with the threads of the Lock Ring facing the ball joint.
- Attach the device to the Ball Joint Mount and turn the Lock Ring to secure it.
Keep the Lock Ring loose enough to allow the device to pivot for aiming.
Typical Network
- Point-to-Point Application
- Point-to-Multipoint Application
Configuring the Device
Please connect devices according to the above.
As a Base Station Mode
- Step 1: Launch the Web browser and enter the default IP address http://192.168.1.88.
- Step 2: When on the login page, please enter the Password. The default Password is “admin”. Then click the Login button to continue.
- Step 3: Go to the Wizard page, select Base Station Mode, and click Next.
- Step 4: In the Network Protocol section, Select Static IP, and click Next.
- Step 5: In WAN Configuration section, Specify the IP address, Netmask, Gatewav and DNS for the device Then click Next.
- Step 6: In Wireless Configuration section, Specify the SSID, Encryption and Password for the device. Then click Next.
- Step 7: In the confirm section, review the configurations and click Confirm to complete the wizard.
As a CP Modes
- Step 8: Repeat steps 1 and 3 to the Wizard page, select CPE Mode, and click Next.
- Step 9: In WAN Configuration section, Specify the IP address, Netmask, Gateway and DNS for the device. Then click Next.
- Step 10: In Wireless Configuration section, Click Start scan 5G button to search for the upstream wireless network.
Select the correct wireless network and auto connect.
Specify the correct wireless parameters to connect to the specified wireless network. Click Next.
Note: Make sure that Encryption and Password are the same as the upstream wireless networks. - Step: In the confirm section, review the configurations and click Confirm to complete the wizard
When LED indicators of both devices are on, the connection is available.
Warranty Card
- If the product defects within three months after purchase, we will provide you a new product of the same model.
- If the product defects within the three-year warranty period, we will provide the professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker damaged, warranty card losing will disqualify the product from limited warranty.
Wireless-Tek Technology Limited
Address: Room 402 4F, BiaoFan Technology Building, Bao’An
Avenue, FuYong Town, Bao’An district, ShenZhen
Website:www.wireless-tek.com
Tel:86-0755-32811290
Email:sales@wireless-tek.com
Technical Support:tech@wireless-tek.com
Read User Manual Online (PDF format)
Loading......