CARBEST 851007 MPPT Solar Charge Controller User Manual
- June 13, 2024
- CARBEST
Table of Contents
CARBEST 851007 MPPT Solar Charge Controller User Manual
FUNCTION
This BT module is an accessory of the MPPT solar charge controller
851005/851006. The controller sends its working parameters to your mobile
phone through this Bluetooth module.
Please download the free APP Charger Connect.
CONNECTION METHO
Plug the cable of the BT module into the Bluetooth interface of the solar
controller and install the BT module in any position where you have easy
access to. Note: The BT module cannot be installed in a metal shield.
Distance to your phone should be less than 10 meters.
APP OPERATION INSTRUCTION
Connection only via APP! Direct pairing via the Bluetooth function of your smartphone is not possible!
Step 1: Scan QR code, download APP and install it on your smartphone.
(Mobile phone requirements: Android: Version 5.0 or above. IOS: Apple 4.0 or
above)
Step 2: Please make sure that “Location” and “Bluetooth” function are ON.
Step 3 : Run APP, search for BT10 and dick to display the device BT10.
Step 4: The working parameters of the MPPT solar charge controller can be
displayed now.
NOTICE
- Connection only via APP! APP will automatically search for Bluetooth devices.
- Only one phone can be connected to one BT module at one time. The second phone can start its pairing after the first pairing phone exit APP and disconnect Bluetooth.
- Some phones may need to try several times before connection is succsess full.
SCAN QR-CODE TO DOWNLOAD APP ON YOUR SMARTPHONE:
ANDROID
iOS
TECHNICAL DATA
- Input Voltage: 5V
- Distance: < 10 m
- Standby Current: <10 mA
- Cable length: 3 m
- APP name: Charger Connect
- Connect-ID: BT10
REIMO REISEMOBIL-CENTER GMBH-63329 EGELSBACH BOSCHRING 10 GERMANY MADE IN CHINA
