Ampeg SVT-610HLF Bass Guitar Cabinet User Guide
- June 13, 2024
- ampeg
Table of Contents
SVT-610HLF
Bass Guitar Cabinet
SVT-610HLF Bass Guitar Cabinet
Owner’s
Manual
What’s in the Box
SVT® -610HLF Speaker Cabinet, Quick Start Guide.
Introduction
Your Amped SVT-610HLF 6×10″ bass enclosure is a high quality, two-way speaker
cabinet suitable for all sizes of venues. The SVT-610HLF delivers deep, tight
bass, as well as a generous helping of definition and top-end clarity, thanks
to its 1″ horn driver. The cabinet features heavy duty recessed handles, an
industrial strength grip bar, and heavy duty rear wheels. Skid rails are
placed on the back of the enclosure to protect it while loading in and out of
venues. (Place a foot against one of the rails when tilting the cabinet back
to roll it.)
The Peakon ® and 1/4″ jacks are wired in parallel, allowing easy daisy
chaining from one speaker cabinet to another. Each of the jacks may be used as
an input or a through connection. Speak on connectors are recognized as the
standard for professional installations, assuring a secure, permanent
connection that won’t corrode, vibrate loose, or be easily tampered with. The
1/4″ jacks are convenient, however, the Speak on jacks are recommended when
using power amplifiers over 150 watts for permanent installations, or for the
“first” speaker among a number of daisy chained speakers.
In order to get the most out of your new Amped speaker cabinet, please fully
read this Owner’s Manual, as well as the Important Safety Instructions
included with your cabinet, before you begin playing. And thank you for
choosing Amped.
Jackplane
- 1/4″ Input / Output Jacks
- Speak on Input / Output Jacks
- High Frequency Horn Level Control
Speak on to 1/4″ Wiring Diagram
Suggested Hookup Diagrams
In the example above, a speaker cable with 1/4″ ends connects from one speaker
output of the amplifier to the speaker input of the Amped SVT-610HLF cabinet.
An additional cabinet may be connected by attaching another speaker cable
from the remaining 1/4″ speaker output of the amplifier to a speaker input of
the next cabinet.
WARNING: Always use good quality (non-shielded) speaker cables. Never use
(shielded) instrument cables to connect speakers to an amplifier.
The alternate example shown above is not as common, but is great for daisy-
chaining multiple cabinets. You may connect a speaker cable with 1/4″ or Speak
on ends from one speaker output of the amplifier to the speaker input of the
Amped SVT-610HLF cabinet. An additional cabinet may be connected by attaching
another speaker cable from an open jack (thru) to the input jack of the next
cabinet. Multiple cabinets may be daisy-chained this way.
WARNING: Always use good quality (non-shielded) speaker cables. Never use
(shielded) instrument cables to connect speakers to an amplifier. Also, do not
use both cable routes listed in the alternate example above. Use one route or
the other, but never both simultaneously!
Technical Specifications
| Type | 6×10 Bass Enclosure |
|---|---|
| Frequency Response (+/-3 dB) | 53 Hz – 18 kHz |
| Usable Low Frequency (-10 dB) | 42 Hz |
RMS Power Handling
Peak Power Handling| 600 Watts RMS 1200 Watts
Impedance| 40
Sensitivity| 98 dB SPL 1W/1m
Maximum SPL| 125 dB
Components| 6 Custom Designed, 150 Watt, 10″ speakers 1 High Frequency Horn
Size (H x W x D)| 40 inx24 inx16 in 1016 mm x 610 mm x 407 mm
Weight (approximate)| 115 lb 52.16 kg
The SVT-610HLF is covered with a durable, fabric-backed vinyl material. Clean
with a dry, lint-free cloth. Never spray cleaning agents on the SVT-610HLF.
Avoid abrasive cleansers which would damage the finish.
Amped continually develops new products and improves upon existing ones. For
this reason, the specifications and information in this manual are subject to
change without notice.
CAUTION: THIS SPEAKER IS CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS.
CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING
IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED. AND EAR PROTECTION RECOMMENDED IF
UNIT IS OPERATED AT HIGH VOLUME.
Warranty and Support
Visit WWW.AMPEG.COM to…
(1) …identify WARRANTY coverage provided in your local market. Please keep
your sales receipt in a safe place.
(2) …REGISTER your product.
(3) …CONTACT Technical Support, or call
818-575-3600.
www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA
Rev. A
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg, the Ampeg logo, and SVT are trademarks or registered trademarks of
Yamaha Guitar Group, Inc. in the U.S.
and/or other jurisdictions. Speak on is a registered trademark of Neutral AG
Corporation.
References
- Manual-Hub.com - Free PDF manuals!
- Ampeg
- Ampeg
- Manual-Hub.com – Free PDF manuals!
- Ampeg (@ampeg) • Instagram photos and videos
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>