GENERATION LIGHTING CW1151 Wellfleet 15 Inch Tall Wall Sconce Installation Guide

: June 13, 2024
: GENERATION LIGHTING

Table of Contents

GENERATION LIGHTING CW1151 Wellfleet 15 Inch Tall Wall Sconce
Product Information
Product Usage Instructions
GENERAL PRODUCT INFORMATION
Install the Fixture
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GENERATION LIGHTING CW1151 Wellfleet 15 Inch Tall Wall Sconce

Product Information

Product Name: Wellfleet 2 Arm Wall
Model Number: WELLFLEET2A-WALL
Product Type: Wall fixture –
Safety Listing: This product is safety-listed for damp locations.
Dimming Compatibility: The incandescent version of this fixture can be dimmed with a standard incandescent dimmer, while the LED version can be dimmed with a LED dimmer. Please consult the lamp manufacturer for additional information.

Product Usage Instructions

For Standard Wiring:

Secure the mounting plate to the junction box.
Screw the cap into the hole in the bottom of the backplate.
Connect the fixture ground wire to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire using a wire nut.
Connect the black fixture wire to the hot power line wire using a wire nut. For Plug-in:
Secure the mounting plate to the wall.
Feed the cord through the stem and through the hole in the bottom of the backplate.
Screw the stem into the bottom of the backplate.
Connect the fixture ground wire to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral cord wire (square and/or rigid) using a wire nut.
Connect the black fixture wire to the hot cord wire (round and/or smooth) using a wire nut.
For Both Wiring Options:
Properly place all wires and wire nut connections into the junction box/fixture base.
Mount the fixture onto the mounting plate/fixture bracket and secure it in place using the fixture screws.
Install the shade by aligning the holes on the shade with the holes on the bracket and the socket, then secure it in place using the shade screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Adjust the fixture arm as needed.
Please note that these instructions provide a typical installation process. Make sure to follow the applicable installation code and consult a person familiar with the construction and operation of the product for a safe installation.

GENERAL PRODUCT INFORMATION

These fixtures are intended to be installed utilizing NEC-compliant junction boxes.
This product is safety-listed for damp locations.
The incandescent version may be dimmed with a standard incandescent dimmer. LED version may be dimmed with an LED dimmer. Consult the lamp manufacturer for additional information.
This instruction shows a typical installation.

SAVE THESE INSTRUCTIONS!

CAUTION – RISK OF FIRE

This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°C supply conductors.

Install the Fixture

For Standard Wiring:

Secure the mounting plate to the junction box.
Screw the cap into the hole in the bottom of the backplate.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
For Plug-in:
Secure the mounting plate to the wall.
Feed the cord through the stem and through the hole in the bottom of the backplate.
Screw the stem into the bottom of the backplate.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral cord wire (square and/or rigid) with a wire nut.
Connect the black fixture wire to the hot cord wire (round and/or smooth) with a wire nut.
For Both:
Properly place all wires and wire nut connections into the junction box/fixture base, mount the fixture onto the mounting plate/fixture bracket, and secure it in place using the fixture screws.
Install the shade by aligning the holes on the shade with the holes on the bracket and the socket, then secure them in place using the shade screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Adjust the fixture arm as needed.

7400 Linder Ave., Skokie, IL 60077 T 847.410.4400 | F 847.410.4500 www.generationlighting.com
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.