MTTS Asia V.1.02.EN Colibri Phototherapy User Guide

June 12, 2024
MTTS Asia

MTTS Asia V.1.02.EN Colibri Phototherapy

Product Information:

Product Usage Instructions

  1. Control Panel:
    • On/Off Button: Press this button to turn Colibri Phototherapy display and functions on and off.
    • Therapy Mode Button: Press this button to switch between standard and intensive therapy mode.
    • Display: Shows therapy mode and treatment time.
  2. Selecting Therapy Mode:
    • Turn on the device by pressing the On/Off Button. The display shows the total device hours for 3 seconds.
    • The display will start counting the treatment time in STANDARD MODE.
    • To select INTENSIVE mode, press the Therapy Mode Button. The display shows the total device hours of INTENSIVE MODE for 3 seconds.
    • The display will start counting the treatment time in INTENSIVE MODE.
    • Turn off the device by pressing the On/Off Button.
  3. Irradiance:
    • STANDARD MODE:
    • 27.4
    • 30.4
    • 31.8
    • 30.1
    • 27.3
    • 38.1
    • 43.0
    • 43.9
    • 41.3
    • 37.8
    • 26.4
    • 30.1
    • 31.1
    • 30.0
    • 26.1
    • INTENSIVE MODE:
    • 46.0
    • 54.7
    • 55.3
    • 53.0
    • 47.6
    • 65.0
    • 77.2
    • 79.0
    • 73.2
    • 64.0
    • 46.9
    • 51.6
    • 52.8
    • 51.7
    • 46.5
  4. Height Adjustment:
    • Irradiance:
    • 20.0 – 39.9
    • 40.0 – 59.9
    • 60.0 – 79.9
    • 0 – 25 cm
    • 115 – 140 cm
    • Recommended distance from the light source to the patient is 30-40 cm.
    • Exercise caution when adjusting the height of the Colibri Phototherapy.
  5. Cleaning and Disinfection:
    • If visibly soiled, clean the affected parts with soap and water using a soft cloth.
    • Then wipe with a wet cloth and dry with a soft cloth.
    • For difficult areas, use a standard soft-bristled brush.
    • To loosen heavy, dried-on soil, you may first need to saturate the spot with water.
    • When cleaning the device, disconnect the power cord.

Refer to User Manual for comprehensive information: http://www.mtts-asia.com /colibri-phototherapy/

Control Panel

MTTS Asia V.1.02.EN Colibri Phototherapy-FIG1

  1. On/Off Button
    Press this button to turn Colibri Phototherapy display and functions on and off.

  2. Therapy Mode Button
    Press this button to switch between standard and intensive therapy mode.

  3. Display
    Shows therapy mode and treatment time.

Selecting therapy mode

Colibri Phototherapy can be operated in 2 modes:

STANDARD: ~33 µW/cm2/nm

INTENSIVE: ~57 µW/cm2/nm

  • Turn on the device by pressing the “On/Off Button”.
  • The display shows the “total device hours”.
  • This will be displayed for 3 seconds.MTTS Asia V.1.02.EN Colibri Phototherapy-FIG2
  • The display will start counting the “treatment time” in STANDARD MODE.MTTS Asia V.1.02.EN Colibri Phototherapy-FIG3
  • To select INTENSIVE mode press the “Therapy Mode Button” The display shows the “total device hours of INTENSIVE MODE”. This will be displayed for 3 seconds.MTTS Asia V.1.02.EN Colibri Phototherapy-FIG4
  • The display will start counting the “treatment time” in INTENSIVE MODE.MTTS Asia V.1.02.EN Colibri Phototherapy-FIG5
  • Turn off the device by pressing the “On/Off Button”.MTTS Asia V.1.02.EN Colibri Phototherapy-FIG6

Irrandiance

STANDARD MODE

INTENSIVE MODE

IRRADIANCE

Height adjustment

  • Recommended distance from the light source to the patient is 30-40 cm.
  • Exercise caution when adjusting the height of the Colibri Phototherapy.

Cleaning and disinfection

If visibly soiled, clean the affected parts with soap and water using a soft cloth. Then wipe with a wet cloth and dry with a soft cloth. For difficult areas use a standard soft-bristled brush.
To loosen heavy, dried-on soil, you may first need to saturate the spot with water.
When cleaning the device disconnect the power cord.

Colibri Phototherapy. Quick Reference Guide.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals