CARVEN EXHAUST 2016-2020 Toyota Tacoma Single Exhaust System Instructions
- June 13, 2024
- CARVEN EXHAUST
Table of Contents
CARVEN EXHAUST 2016-2020 Toyota Tacoma Single Exhaust
2016-2020 TOYOTA TACOMA
- NOTE: Read before install. Carven Exhaust Inc, recommends professional installation for all of our products. Install products at your own risk.
- Allow exhaust system temperatures 10 cool down, 2-3 hours after vehicle has been running is recommended. Refer to power tools and equipment manuals for proper safety instructions.
- Safety wear is recommended, serious injuries and burns can occur if proper safety precautions are not taken. If you have any questions please contact info@carvenexhaust.com or 951-817-5101.
- carven Exhaust is not responsible for performance on install nor warranty.
- Customer to verify due diligence regarding install and warranty.
- For more install instructions & tips please visit our YouTube channel @carven Exhaust.
clamp Specs: Place top of damp over non perforated section of tube, then slide clamp down to the silt section. Torque damp bolt to 6SLBS.
Parts Included:
- 2.50″ band clamp QTY: 2
- 4• signature tip QTY: 1
- note must use OEM hardware & gasket
Instructions
- Step 1 :
- Loosen nuts & bolts on the OEM clamps. Spray lubricant on exhaust hanger for easier removal
- Remove spare tire before removing OEM exhaust. OEM can be removed in one piece if car lift is used
- Step 2:
- Once OEM is removed, start with flange pipe. Keep OEM gasket and install on flange. Tighten hardware to hold in place
- Next get muffler section into hangers and fastened to flange pipe. Tighten band clamp to hold in place
- Step 3:
- Install tail pipe from the rear and use band clamp to slip over muffler section. Tighten to hold in place
- Install the exhaust tip into desired position and tighten to hold into place
- Step 4:
- When exhaust is in place, go to flange pipe to tighten hardware. Secure first band clamp before rear clamp
- Once all gaps are alleviated, tighten hardware to spec. if any leaks arise, loose clamps and pull from flange pipes towards engine
Read User Manual Online (PDF format)
Loading......