Schreder HD 40-60-100 Stainless Steel Tflex Module Instruction Manual
- June 13, 2024
- Schreder
Table of Contents
TFLEX MODULE
STAINLESS STEEL
HD 40-60-100
HD 40-60-100 Stainless Steel Tflex Module
INSTALLATION INSTRUCTIONS
FIXED BRACKETS
Ansi 3G
*Fixed brackets
are 3G vibration compliant and available for all luminaire sizes.
**Fixation available with 3mm or 5mm thickness bracket.
REMOTE MOUNTING
SAFETY INSTRUCTION
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualifi ed person. Always switch off the power prior to installation, maintenance or repair activities.
RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitt ed from this product. Do not stare at the luminaire when operating as it may be harmful to the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of less than 0.94m is not expected.
ENERGY EFFICIENCY
This product contains a light source of an energy effi ciency class G or higher or see table on fi rst page.
PVC INSULATION AND Y CONNECTION
In case of PVC insulated mains cable, the installer MUST ensure that the WHOLE cable is protected against climatic conditions, especially UV rays and rain, by making sure that the cable is contained inside the luminaire and pole. Y-connection: In case of damage to the wire, it has to be replaced only by the manufacturer, distributor or by an expert, to avoid risks.
Copyright © Schréder S.A. 2023
Executive Publisher: Stéphane Halleux – B-4000 Liége, Rue de Mons 3 (Belgium)
The information, descriptions and illustrations herein are only of an
indicative nature and subject to changes without notice.
02-69-236 | rev B | 06-2023
www.schreder.com